Splicing of reinforcement bars with epoxy joints

The splicing of reinforcement bars in tension using epoxy-sleeve joints is described. The optimum length of the splicing sleeve required and the optimum bonding layer of epoxy resin in the joint were determined in direct tension tests. The performance of the epoxy-sleeve joint made to these optimum dimensions is then compared to that of a lap splice made according to the provisions of CP 110 in a beam flexure test. A sleeve length of 12 bar diameters and an optimum average thickness of 2 mm of the bonding layer of epoxy are shown to develop the full strength of the splices bar. Tensile reinforcement bars spliced using epoxy-sleeve joints are shown to perform satisfactorily as flexural reinforcement in beams and compare favourably with the standard CP 110 lap splice. Epoxy-sleeve joints are shown to produce stiffer beams and reduced crack width at the joints.     

低苯乙烯散发不饱和聚酯树脂研究

用单官能团醇对不饱和聚酯树脂改性，合成了苯乙烯质量分数为30％和W01树脂，对W01树脂的挥发性和反应性进行了测定，研究了成膜助剂对01树脂性能的影响，并与通用型191树脂和一种亚克力板层间粘合用不饱和聚酯树脂进行了比较；指出结合成膜助剂的W01树脂进一步降低苯乙烯的散发。     

含磷本质阻燃环氧树脂的研究进展

综述了含磷本质阻燃环氧树脂(包括含磷协同本质阻燃体系)的发展、现状和未来趋势。与添加型阻燃剂阻燃环氧树脂相比,通过含磷环氧化合物和/或含磷固化剂把磷元素嵌入环氧树脂结构中制得的含磷本质阻燃环氧树脂,具有阻燃效率高、阻燃持久、物理力学性能不受影响、燃烧过程中毒性腐蚀性挥发物质的生成量低等优势。利用协同阻燃效应,可以进一步提高阻燃性能。但是,含磷本质阻燃环氧树脂和含磷协同本质阻燃体系存在制备工艺复杂、生产成本较高等不足。     

二炔烃一步法合成高支化聚芳烃树脂的研究

以五氯化钽和四苯基锡为催化剂,通过二炔烃的环三聚反应一步法合成了一系列高支化的聚芳烃树脂;为改善均聚物的可溶性,引入了二炔单体与苯乙炔。IR和1H NMR谱图分析证实通过[2+2+2]环三聚机理形成了目标产物。同时研究了单体种类、单体催化剂比例、催化剂陈化时间、反应温度和反应时间对树脂结构和热性能的影响。     

Thiol-terminated hyperbranched polymer for DLP 3D printing: Performance evaluation of a low shrinkage photosensitive resin

In order to lower the volume shrinkage of the DLP 3D printing photosensitive resins during printing, a thiol-terminated hyperbranched polymer (T-HBP) was synthesized and introduced into the bisphenol A epoxy acrylate (EA) based photosensitive resin system. The obtained T-HBP was characterized by FTIR and ¹H NMR spectra, and the grafting rate of sulfhydryl was determined. The mechanical properties of the photosensitive resins were measured by tensile and impact strength measurement. The glass transition temperature of the photosensitive resins was analyzed by DSC and the impact fracture surface was observed by SEM. T-HBP exhibited a much lower viscosity than its linear counterparts, and the addition of thiol improved the curing speed of the photosensitive resins. When the amount of T-HBP added was 20 wt%, the shrinkage of the photosensitive resins was reduced by about 45.5% and the impact strength increased by 33.9% compared with the control. The macromolecular spherical structure of T-HBP effectively reduced the functional group density of the photosensitive resins. In addition, the thiol-acrylate photopolymerization introduced by T-HBP further reduced the volume shrinkage of the photosensitive resins.     

Structural,thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

In the presented study, the structural, thermal, and mechanical properties of the nanocomposites were investigated by doping silanized hexagonal boron carbide (h-B₄C) nanoparticles in varying proportions (0.5%, 1%, 2%, 3%, 4%, and 5%) into the epoxy resin by weight. For this purpose, the surfaces of h-B₄C nanoparticles were silanized by using 3-(glycidyloxypropyl) trimethoxysilane (GPS) to improve adhesion between h-B₄C nanoparticles and epoxy matrix. Then, the silanized nanoparticles were added to the resin by ultrasonication and mechanical stirring techniques to produce nanocomposites. The bond structure differences of silanized B₄C nanoparticles (s-B₄C) and nanoparticle doped composites were investigated by using Fourier transform infrared spectroscopy. Scanning electron microscopy and energy dispersion X-ray spectroscopy (SEM-EDS) technique was used to examine the distribution of nanoparticles in the modified nanocomposites. Differential scanning calorimetry and thermogravimetric analysis techniques were used to determine the thermal properties of the neat and s-B₄C doped nanocomposites. The tensile test and dynamic mechanical analysis were performed to determine the mechanical properties. When the experimental results were examined, changes in the bonding structure of the s-B₄C nanoparticles doped nanocomposites and significant improvements in the mechanical and thermal properties were observed. The optimum doping ratio was determined as 2% by weight. At this doping ratio, the T_g, tensile strength and storage modulus increased approximately 18%, 35%, and 44% compared to the neat composite, respectively.     

Study on polyurethane-acrylate/cerium dioxide modified by 3-(Methylacryloxyl)propyltrimethoxy silane and its UV absorption property

Firstly, cerium dioxide(CeO₂) was modified by 3-(Methylacryloxyl)propyltrimethoxy silane (KH-570), and modified CeO₂ (mCeO₂) was prepared. Then poly (urethane-acrylate) was modified by mCeO₂, and poly (urethane-acrylate)/modified CeO₂ (PUA/mCeO₂) composites with ultraviolet absorption property were prepared. The morphology, thermal hydrophobicity, mechanical properties, optical properties, and UV-absorption properties of PUA/mCeO₂ composites were studied. XRD and SEM analysis showed that the modified CeO₂ had better dispersion in the matrix than that of pure CeO₂. Ultraviolet–visible spectrum and thermogravimetric analysis were used to characterize the optical properties and thermal stability of PUA/mCeO₂ composites. The results showed that with the increasing of the mCeO₂ content, the UV-absorption property of PUA/mCeO₂ composites was improved gradually. When the content of mCeO₂ is 3%, the absorption of ultraviolet of PUA/mCeO2 composites is about 5 times of pure PUA film, and the absorption band is mainly in the UVA section. The thermal stability of PUA/mCeO₂ composites was improved with the adding of mCeO₂. With the increasing of mCeO₂ content, the contact angle of PUA/mCeO₂ composites increased significantly. And the UV-absorption mechanism of PUA/mCeO₂ Composites was studied. UV-curable PUA/mCeO₂ composites have good UV absorption property and water resistance. They will be used in the sun screen and protect people's skin.     

N503萃淋树脂分离富集金

研究了N_(503)萃淋树脂的合成方法及其分离富集金的条件.N_(503)萃淋树脂是萃取色层分离富集金的新固定相.2%硫脲、1%亚硫酸钠水溶液均可以定量解脱柱床上的金.经矿样验证,金的测定结果与717离子交换树脂吸附法一致.红外光谱表明该萃取色层与N_(503)液液萃取金有相同的机理.     

微波辐照聚合物及其复合材料应用的研究进展

介绍了微波辐照作用机理,综述了近年来聚合物及其复合材料的微波固化研究进展,着重讨论了环氧树脂及其复合材料微波固化与热固化作用的对比、影响微波固化速率的因素以及微波固化对材料结构、性能的影响,简要介绍了其他聚合物及其复合材料的微波辐照固化研究,最后探讨了微波辐照技术未来的发展趋势。     

呋喃树脂低温固化性能测试

采用一种新合成的０３＃固化剂,可以使呋喃树脂在常温下缩短固化时间,并且在低温下可以固化．测试结果表明：在低温下呋喃树脂的固化性能、粘结强度和体积安定性均符合技术要求．