葡甘聚糖改性大豆蛋白作为药物乳化剂的研究

用天然大豆蛋白和葡甘聚糖,利用羟氨反应使蛋白质分子的侧链氨基与多糖分子的末端不饱和羰基反应生成稳定的共价键,进而形成以多羟基葡甘聚糖为亲水基,大豆蛋白为疏水基的新型两亲分子。结果表明,葡甘聚糖改性大豆蛋白是良好的药用乳化剂,制成的O/W乳状液稳定性明显优于Tween-60制成的乳状液。     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

异型密封条挤出模头的研制

橡胶异型密封条板式挤出模头设计的关键点是首。何使口模区各胶料质点的出口压力及流速均匀一致和如何确定口模的形状尺寸。根据流变学理论设计出初始口型曲线尺寸、并需进行试挤以修正口型曲线和尺寸。本文以一典型异型密封条挤出模头的研制为例，详细介绍了异型密封条挤出模头的设计方法及基本思路。     

影响医疗垃圾热解特性的主要因素

用TG-DTA差热热重联用分析仪对影响医疗垃圾热解特性的主要因素,包括垃圾种类、升温速率、试样质量、实验终温和保温时间等进行了实验研究。结果表明,垃圾种类不同,表现出的起始温度、终止温度、峰温和失重率等反映医疗垃圾热解特性的主要参数不同;升温速率和试样质量对医疗垃圾热解特性的影响主要表现在起始温度和终止温度方面,而对峰温和失重率的影响较小;实验终温和保温时间的影响则主要表现在医疗垃圾的失重率上,即实验终温越高、保温时间越长,医疗垃圾的失重率越高,而对起始温度和终止温度的影响则可以忽略。     

中间体苯基丙酮合成新工艺

实验研究了以氯化苄为原料合成药物中间体苯基丙酮的新工艺，该工艺由苄基氯化锌和苯基丙酮的2步合成反应组成，优化的工艺条件为：原料n(氯化苄）:n(Zn):n(乙酐）为1：1．2：2．5，苄基氯化锌的合成温度60－65摄氏度，反应时间3h，苯基丙酮合成温度30－35℃ ，反应时间5h，总收率72％。     

基于Java框架的银医一卡通系统设计

介绍了一种基于信息共享的医院--银行一卡通的信息系统设计方案。该系统使用Web服务实现接口通信,通过自助服务器连接医院系统和银行系统实现医院与银行的信息共享。基于该系统,用户可以使用中国银行借记卡代替医院门诊卡就医,提供了良好的就医环境,提高了医疗效率。     

一种老人医疗求救装置设计与实现

目前,老人医疗装置是当前应用热点之一,引起广泛的关注。本文就该问题提出了一种老人的医疗求救装置的实现方案,详细阐述了该方案设计过程的各个主要模块设计和软件设计。     

基于条件随机场的中医临床病历命名实体抽取

中医临床病历是中医重要的科研数据资源,但目前临床病历仍以文本为主要表达形式,对病历数据深入分析的前提是进行结构化信息抽取,而命名实体抽取是其基础性步骤。针对中医临床病历的命名实体,如症状、疾病和诱因等的抽取问题,通过手工标注的413份病历数据(以中文字为特征)与4类特征模版,将条件随机场(CRF)、隐马尔科夫模型(HMM)和最大熵马尔科夫模型(MEMM)用于中医病历命名实体抽取的实验,并进行比较分析。结果表明,结合合适的特征模版,CRF命名实体抽取方法取得了较好的性能,F1值的症状达到0.80,疾病名称达到0.74,诱因0.74。与HMM和MEMM相比,CRF有最高的准确率和召回率,是一种较为适用的中医临床病历命名实体抽取方法。