变形温度和变形程度对Ti－31合金性能和组织的影响

通过高温和室温拉伸试验，研究了变形温度和变形程度对Ｔｉ－３１合金板材性能和组织的影响。结果表明，合金在７５０～８５０℃的温度下变形５％～２０％空冷后，其室温机械性能均能达到材料的技术指标要求。并发现了材料在９００℃的临界变形区。     

过共晶铝硅合金细化初晶硅的研究

研究了ZL8604过共晶铝硅合金初晶硅细化剂和加入方式与加入量以及影响细化效果的冶铸工艺因素,实验结果达到了技术指标要求。     

EFFECT OF HYDROGEN ON THE MICROSTRUCTURE OF SUPER-α2 ALLOY WITH β SOLUTION AND AGEING TREATMENT

借助透射电镜和Ｘ射线衍射仪探讨了氢对Ｓｕｐｅｒ－α２合金β固溶后时效组织的影响，结果表明，氢使时效组织显著细化，使析出相呈细小板条状规则排布，此外，氢还促进Ｂ２相转变为Ｏ相。     

A study of impact toughness of Fe-Cr-X damping alloys

A study was carried out on the impact toughness of Fe- Cr- Х damping alloys. Two measures proved to be effective in improving impact toughness. One was to lower carbon plus nitrogen content to an ultra- low level. This method is suitable for single- phase ferrite alloy. The other is to use dual- phase damping alloys. The presence of martensite in Fe- Cr- Х alloys can enhance impact toughness remarkably, but lower damping capacity drastically. This shows the importance of achieving balance between mechanical prop-erties and damping capacity by properly controlling martensite volume fraction in dual- phase alloys.     

Electrochemical Investigation on the Formation of Dy-Fe Alloy in Molten Chlorides

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＩｎｖｅｓｔｉｇａｔｉｏｎｏｎｔｈｅＦｏｒｍａｔｉｏｎｏｆＤｙＦｅＡｌｏｙｉｎＭｏｌｔｅｎＣｈｌｏｒｉｄｅｓＬｉｕＧｕａｎｋｕｎ（刘冠昆），ＴｏｎｇＹｅｘｉａｎｇ（童叶翔），ＨｏｎｇＨｕｉｃｈａｎ（洪惠婵），Ｙａｎｇ...     

塑料合金用反应型相容剂

反应型相容剂含有反应基团,可与含相应基团的聚合物起化学反应,因而在混炼过程中增容。本文系统地介绍各种反应型相容剂的设计、合成、品种和应用。     

Mg-Li-Al合金近液相线制浆及部分重熔

采用近液相线铸造方法制备了Mg—5％Li—3％A1合金的半固态浆料。通过对该合金近液相线铸造与常规铸造组织进行比较，以及在不同静置时间、不同冷却速率下对其铸造组织的影响，较详细地分析了近液相线铸造组织的变化过程。试验结果表明，在Mg—Li合金熔炼中，添加2％Ca可实现阻燃，但效果不如对一般镁合金；与常规铸造相比，近液相线铸造可获得均匀、细小枝晶的组织结构；适当静置或提高冷却速率有利于组织的细化和均匀化；在适当的部分重熔工艺条件下，坯料组织可获得较理想的触变组织。     

GH871 合金的蠕变断裂机制

对采用AIM+ESR和VIM+ESR工艺冶炼的GH871合金在650 ℃的蠕变性能及特征的研究表明,与用AIM+ESR工艺冶炼的GH871合金相比,用VIM+ESR工艺冶炼的GH871合金在蠕变断裂过程中裂纹萌生的形式(包括裂纹形状及形成时间)和裂纹扩展至裂纹连接所需的时间均表现出明显韧化的特征.     

Surface Position-Resolved Thermophysical Properties for Metallic Alloys

Thermophysical properties are collective measures of a material to transport dynamical quantities of physical nature on its surface or through the bulk. As such, the exact nature of couplings between particles in a many-body assembly of building block atoms or molecules sensitively determines their values. The couplings between nearest neighbors are the product of the local elemental composition and the material phase. In this study, thermal cycling of a four-element Wood’s alloy specimen brings out cadmium-rich patches to the top surface of the specimen. An assembly of such patches leads to depth-dependent deviations of elemental composition from that of the bulk. Surface-layer atoms are driven to form a high temperature laser-produced plasma (LPP), and time-resolved spectroscopy of their emissions show the variability of elemental composition over surface positions as well as over depth from the surface. These thermal history-driven composition anomalies contribute to significant variability in the measured values of spectral emissivity and thermal diffusivity.     

镁合金表面喷铝防腐蚀层的微观组织分析

在AZ91D镁合金表面热喷铝，用以提高其表面的耐腐蚀性能。采用SEM，EPMA等方法对AZ91D表面喷铝扩散层的组织进行了仔细的观察与分析，发现在防腐蚀层上有大量的Mg17Al12相存在，且呈决状及非连续片状分布。经显微硬度测定，喷铝层硬度较镁合金基体高；腐蚀后这种相凸出于基体，比镁合金基体有较好的耐腐蚀性能。