Effect of sulfate on Cu(Ⅱ) sorption to polymer-supported nano-hydrated ferric oxides: Experimental and modeling studies

Incorporating of hydrous ferric oxide(HFO) inside porous supports with large sizes has become an effective way to decontaminate the water from heavy metals. Ubiquitous anions like sulfate are usually present in high concentrations in water, and might greatly affect adsorption behavior of hybrid HFO. Here, a polymer-based HFO-CPS was fabricated by encapsulating nano-HFO inside a chloromethylated polystyrene polymer(CPS) and the reactivity of HFO-CPS with Cu(Ⅱ) was evaluated in the presence of sulfate ions.Surface complexation theory was firstly employed to describe the effect of sulfate on Cu(Ⅱ) adsorption edges of hybrid HFO-CPS, where constant capacitance model(CCM) was adopted. The available weak adsorption site Fe_((2))OH of hybrid HFO-CPS was found to decrease from 20% Fe to 5% Fe, which might be caused by the pore plugging effect after HFO encapsulation. With the assumption that a ternary complex was formed, the effect of sulfate on Cu(Ⅱ) adsorption by HFO-CPS were successfully described by CCM using the optimized Fe_((2))OH site under different sulfate concentrations(1 or 10 mmol·L~(-1)) and Cu/Fe ratios(0.0042 or 0.0252). It is confirmed that the formation of Fe OHCu SO_4 ternary surface complexes played an important role in enhancing Cu(Ⅱ) adsorption on HFO-CPS in the presence of sulfate.     

从改革中求发展 从改革中求效益

总结了解放４５年来上海钢铁工业所取得的成就，重点阐述了技术、工艺、装备方面的现状和不足以及发展目标，指出：只有实行改革开放，加快技术改造，才能提高上海钢铁工业的总体水平，提高经济效益，也才能使老企业焕发青春，步入现代化钢铁工业之林。     

重金属强化含金矿石的氰化浸出

通过分析铊、铋、汞和铅等重金属强化金氰化溶解的电化学原理,对含金氧化物矿石和难浸硫化物金精矿进行了重金属强化浸金研究.结果表明:重金属对金氰化溶解的阳极过程有显著的强化作用,但在常规供氧条件下,金的溶解速率并未显著提高;只有同时采用阴极强化措施,才能使重金属起到显著提高金溶解速率的作用;对于含金氧化物矿石,单独采用重金属强化即可明显提高浸金速率,如果在过氧化氢助浸的基础上添加重金属,金的浸出速率会有更大幅度的提高;对硫化物金精矿而言,单独采用重金属无明显强化效果,只有在添加过氧化氢作为辅助氧化剂的基础上,重金属对金的浸出才能起到强化的作用,该体系中过氧化氢起到了强化阴极过程和氧化硫化物的双重作用.     

电感耦合等离子体原子发射光谱法测定云南某矿山锑矿选矿流程样品中锑

锑在现代工业体系中占有重要地位,快速准确测定锑矿中锑含量对锑矿的采选具有重要指导意义。云南某矿山锑矿以萤石为主要伴生矿,现有的盐酸、硝酸、氢氟酸和高氯酸混酸体系无法彻底分解样品,而采用碱熔处理流程长且引入大量基体,均无法满足准确快速测定的要求。选择硫酸-氢氟酸混酸体系分解样品,再用酒石酸-盐酸混合溶液加热浸取,锑完全溶解于溶液中,选择Sb 206.833{463}nm为分析谱线,使用电感耦合等离子体原子发射光谱法(ICP-AES)测定锑。结果表明,锑的质量浓度在5.0～80 μg/mL范围内与其发射强度呈良好的线性关系,校准曲线线性相关系数r=0.999 8;方法的检出限为0.012 μg/mL。按照实验方法对锑矿石成分分析标准物质和锑矿选矿流程样品中锑进行测定,结果的相对标准偏差(RSD,n=5)为0.71%～5.7%;标准物质的认定值和测定值相一致;锑矿选矿流程样品中锑的加标回收率为97%～102%,满足国家地质矿产行业标准DZ/T 0130—2006的要求。     

铁在盐酸中的缓蚀剂的两种作用类型的研究

通过腐蚀电位、极化曲线与交流阻抗测量研究了3种伯胺和丙炔醇对铁在盐酸中的缓蚀作用类型。结果表明,3种伯胺的缓蚀作用是几何覆盖效应,而丙炔醇的缓蚀作用则来自负催化效应。还证明,在强阳极极化的Tafel 直线区间,十二烷胺吸附在电极表面的覆盖率θ不随电位改变,十四烷胺的θ随电位的升高而增大。丙炔醇使铁阳极溶解反应活化能位垒增高的量.fa(θ)随电位升高而减小,其数值为df_a(θ)/dE=-73J·mol_-1.mV-1。     

喷射成形技术在钢铁材料中的应用

本文简要介绍了喷射成形技术的原理、特点及其在钢铁材料中的应用概况 ,综述了各种喷射成形钢铁材料的研究现状及其产品发展状况     

关于新一代钢铁制造流程的命题

21世纪钢铁工业面临的是一种最新形式的综合性挑战,它包括了经营成本、产品质量与性能、生产效率与合理规模、能耗与过程排放、环境与生态等多目标群优化.这些挑战,主要应从钢厂生产流程整体优化来解决.新一代钢铁制造流程的研究内涵应包括：高效率、低成本的洁净钢生产平台技术;工序间动态-有序运行的“界面技术”;流程工程集成技术;系统、高效的能源转换技术;废弃物再资源化技术;产业链接技术;流程物理模型与虚拟现实技术.总之,要通过钢铁制造流程的研究开发,拓宽钢厂生产流程的功能——即钢铁产品的制造功能、能源转换功能和废弃物再资源化功能-增强市场竞争力和可持续发展能力.     

铁(Ⅲ)—苯芴酮—聚乙二醇辛基苯基醚显色反应的研究及应用

详细研究了非离子表面活性剂聚乙二醇辛基苯基醚（OP）存在下铁（Ⅲ）与苯芴酮的显色反应。结果表明铁（Ⅲ）与苯芴酮形成了蓝紫色的配合物，其最大吸收波长λmax为614nm，对比度（△λ）为74nm，摩尔吸光系数ε614为6．41×104L·emol(-1)·cm(-1)，铁量在0～16μg／25mL范围内服从比耳定律。所拟方法用于磷矿样中铁的分析与邻菲罗啉法结果一致。     

Structural and magnetic characterization of norbornene-deuterated norbornene dicarboxylic acid diblock copolymers doped with iron oxide nanoparticles

A series of iron oxide doped norbornene (NOR)/deuterated norbornene dicarboxylic acid (NORCOOH) diblock copolymers were synthesized and characterized by X-ray photoelectron spectroscopy (XPS), small angle neutron scattering (SANS) and superconducting quantum interference device (SQUID) experiments. γ-Fe₂O₃ nanoparticles were synthesized within the microdomains of diblock copolymers with volume fractions of NOR/NORCOOH 0.64/0.36, 0.50/0.50 and 0.40/0.60. A spherical nanoparticle morphology was displayed in the polymer with 0.64/0.36 volume fraction. Polymers with 0.50/0.50 and 0.40/0.60 volume fractions exhibited interconnected metal oxide nanostructures. The observed changes in the shape and peak positions of the small-angle neutron scattering profiles of polymers after metal doping were related to the scattering from the metal oxide particles and to the possible deformed morphologies due to the strong interparticle interactions between metal particles, which may influence the polymer microphase separation. The combined scattering from both polymer domains and magnetic particles was depicted in SANS profiles of metal oxide doped polymers. γ-Fe₂O₃ containing block copolymers were superparamagnetic at room temperature. An increase in the blocking temperature (T_b) of interconnected nanoparticles was observed and was related to the interparticle interactions, which depends on the average distance (d) between particles and individual particle diameter (2R). The sample with volume fraction of 0.4/0.6 have the lowest d/(2R) ratio and exhibit the highest T_b at 115 K.     

分光光度法测定锌铁合金镀层及镀液中的铁

采用分光光度法，以磺基水杨酸为显色剂、双氧水为氧化剂，锌铁合金镀层用稀盐酸溶解，控制pH值为1.5～3，在等吸收点处测定吸光度，并根据比耳定律计算镀层及镀液中的铁含量。