基于智能手机的汽车胎压监测系统

针对传统汽车胎压监测系统(TPMS)的不足,设计了基于智能手机的汽车胎压监测系统。该系统由轮胎传感器、中继器和智能手机三部分组成,通过无线射频技术和蓝牙技术,实现在智能手机上实时显示轮胎状态,以及对系统的报警阈值、传感器ID等参数进行设置的功能。实验结果表明:该系统的最大测量误差为±0.06 bar,上车测试的丢失率为1.69%,传感器匹配时间约为1 min。该系统有效地将TPMS和智能手机结合起来,改善了TPMS的显示效果,增强TPMS的交互性,使其有高品质用户体验效果,具有极高的产业化价值。     

Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis

A fabrication process has been developed to create suspended carbon microelectromechanical system (C-MEMS) structures. SU-8, a negative photoresist, was used as the starting material and was converted to the desired carbon microstructures using pyrolysis in an inert atmosphere. Suspended carbon-micro and nano electromechanical system (C-MEMS/NEMS) structures with feature sizes down to 500 nm were fabricated by ultra violet/electron beam (EB) lithography and pyrolysis. The problem of charging of the non-conductive SU-8 surface was solved by partially masking a thin metal layer to prevent the repulsion of negative charged electrons before EB writing. Complex suspended C-MEMS structures, such as bridges and networks have been formed. This fabrication method can accurately and reproducibly produce various suspended C-MEMS structures which have applications in microelectronics and biosensing.     

基于射频隐身的相控阵雷达搜索控制参量优化设计

机载雷达射频隐身技术对提高飞行器生存能力具有重要意义。 本文研究了机载相控阵雷达基于射频隐身的搜索控制参量优化设计。通过分析截获概率原理 ,给出了目标特征和雷达系统性能对驻留时间和波位间隔等搜索控制参量的影响关系,构建 了目标探测性能与隐身性能约束下的优化模型。仿真获得了满足隐身要求下相控阵雷达的最 优搜索控制参数。     

Electrochemical properties of boron-carbon-nitride films formed by magnetron sputtering

The electrochemical behavior of B_1.0C_2.4N_1.0 thin film was investigated in acidic, neutral and alkaline solutions. The anodic polarization curve of the film in 1 M NaOH showed the anodic dissolution of the film. The curve of the film in 1 M HCl showed no anodic dissolution. The cathodic polarization curve in 1 M NaCl showed shift to a negative potential side, but the anodic polarization curve was the same as that of Pt. The anodic dissolution in 1 M NaOH depended on potentials, that is, no anodic dissolution was recognized in a potential range of −0.2 to 0.1 V but the dissolution rate increased with increasing potential in a range of 0.1-0.6 V. The anodic current density of the film is directly proportional to the dissolution rate at potentials higher than 0.1 V. The dissolution rate of the film was increased with increasing solution pH.     

Carbon molecular sieve films produced by dc sputtering

This paper reports adsorption measurements that show molecular sieve effects in amorphous hydrogenated carbon (a-C : H) films deposited by d.c. magnetron discharge decomposition of acetylene. Adsorption of organic gases on the films is studied by using a quartz crystal microbalance technique. The sieve effect in this material depends on both deposition and annealing conditions. Films having significant molecular sieve effects are found to be typically microporous and to have a very small characteristic micropore dimension. It is suggested that the d.c. sputtered a-C : H film may be useful as a molecular sieve material in selective adsorption and gas permeation studies.     

Fundamental Optical Absorption Edge of Sputter-Deposited Zirconia and Yttria

Zirconia and yttria films were sputter deposited onto unheated fused silica substrates using a metal target and rare gas-oxygen discharges. Double-beam spectrophotometry was used to measure the transmission and reflection as a function of incident photon energy, E , from which the absorption coefficient, α( E ), was calculated. An indirect interband transition at E _i= 4.70 eV and two direct interband transitions at E _g1= 5.17 eV and E _g2= 5.93 eV occur in monoclinic zirconia. Two direct interband transitions at E _g1= 5.07 eV and E _g2= 5.73 eV occur in cubic yttria. The absorption edge structure is modified when unusual phases, such as tetragonal zirconia, and zirconia and yttria with no longrange crystallographic order, are present.     

雨雾天气下混合FSO/RF系统性能研究

通过对混合FSO/RF系统雨、雾天气下的误码率进行研究,从仿真结果中分析出雾是影响FSO系统的最主要因素,得出RF系统可以弥补FSO链路雾天缺陷的结论。经分析对比出雨天对FSO系统的影响要远小于雾天对FSO系统的影响。同时还对雨、雾天气情况下的开关键控（OOK）和脉冲相位调制（PPM）的性能进行了仿真分析。验证了在无线光通信系统中,PPM调制系统性能要优于OOK调制系统的性能。     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

一种便携式超高频RFID读写器的设计

该文首先分析了超高频RFID读写器的硬件架构,然后对AS3992芯片的特性进行了介绍,对其关键指标进行了分析,随后对RFID信道中的损耗进行了估算;该设计采用AS3992内部低功率线性输出,设计了对应的射频前端电路,并进行了ADS仿真验证,最后分析了ISO/IEC 18000-6B数字基带中的清点标签流程,对读写器进行了性能指标测试。     

微波铁氧体器件薄膜的制备及性能研究

该文采用RF磁控溅射工艺制备了射频薄膜电感用的铁氧体薄膜。为了降低铁氧体薄膜在高频下的涡流损耗、剩余损耗等,通过对铁氧体材料的磁特性分析,研究了不同的温度、成分掺杂对铁氧体磁性能的影响,获得了矫顽力为5.619 6Guss的铁氧体薄膜,并采用SEM、XRD对铁氧体薄膜表面结构进行了表征,采用VSM对薄膜磁性能进行了测试。