高浓度钢渣粉尘环境发动机空气过滤系统的改进与维护

针对液压挖掘机在高浓度钢渣粉尘作业环境下,钢渣粉尘对发动机的损害,分析了发动机空气滤清器的作用,阐述了传统空气过滤系统存在的问题,提出了改进的方案与维护措施.     

炼厂碱渣处理工艺及设计优化

针对催化裂化装置汽油和液态烃精制产生的含硫废弃物的碱渣处理，讨论了碱渣提酚、碱渣湿式氧化脱臭两种处理工艺的环境治理效果，并就碱渣湿式氧化脱臭工艺如何降低运行成本、减少污水排放等内容进行了探讨。     

用光相关光谱研究乳液粒度的浓度依赖性

利用光相关光谱测定了不同浓度的聚丙烯酸酯核／壳乳液和聚苯乙烯标样乳液在室温下的粒度，确定了两体系可测粒度的浓度范围，随粒度多分散性增加，可测粒度的浓度范围减小，且浓度范围与试样粒度有关。测定结果进一步表明，随测定试样的浓度增加，粒度下降，根据Ｓｔｏｋｅｓ－Ｅｉｎｓｔｅｉｎ公式，求出了粒子移动扩散系数，以及浓度为零时的粒子移动扩散系数。     

Solubilization of unilamellar liposomes by betaine-type zwitterionic/anionic surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X_zwitter) and neutral or electrically charged unilamellar liposomes were investigated. The mixed systems were formed by N-dodecyl-N,N-dimethylbetaine and sodium dodecyl sulfate in the presence of piperazine-1,4-bis-(2-ethanesulfonic acid) buffer at pH 7.20. Unilamellar liposomes formed by egg phosphatidylcholine, in some cases together with stearylamine or phosphatidic acid, were used. Solubilization was detected as a decrease in static light-scattering of liposomes. Two parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system (i) saturated the liposomes, Re_sat, and (ii) led to a total solubilization of liposomes, Re_sol. From these parameters the bilayer/aqueous medium surfactant partition coefficients for the saturation (K_sat) and complete bilayer solubilization (K_sol) were determined. When X_zwitter was 0.40, The Re and K parameters showed a maximum, whereas the critical micellar concentration (CMC) of these systems exhibited a minimum, regardless of the electrical charge of bilayers. Given that the ability of the surfactant systems to saturate or solubilize liposomes is inversely related to the Re_sat and Re_sol parameters, these capacities appear to be directly correlated with the CMC of the mixed systems. The similarity of both K_sat and K_sol (particularly for X_zwitter=0.2–0.8) suggests that a similar partition equilibrium governs both the saturation and the complete solubilization of bilayers, the free surfactant concentration (S_a,S_b), remaining almost constant with similar values to the CMC for each mixed system studied.     

碱-碳酸盐反应热力学讨论

应用热力学方法探讨了温度对碱 碳酸盐反应的影响 ,反应温度升高时 ,反应的推动力减弱。对碱与碳酸盐发生反应生成沉淀时所需碱的浓度以及温度的影响进行了讨论。 2 98K ,pH≥ 10 .6时 ,碱 碳酸盐反应能发生 ,反应温度升高 ,碱 碳酸盐反应所需碱的浓度相应增大。对氢氧化锂与碳酸盐反应可能生成碳酸锂沉淀时溶液的碱的浓度作了计算 ,2 98K ,pH≥ 13.1时 ,氢氧化锂与碳酸盐反应除生成水镁石和方解石外还能生成碳酸锂沉淀 ,反应温度升高时 ,反应生成碳酸锂沉淀所需碱的浓度变化不大     

碱土金属氧化物催化氧化异丙苯反应研究

考察了碱土金属氧化物CaO、MgO和SrO在催化氧化异丙苯合成过氧化氢异丙苯 (CHP)反应中的性能。3种催化剂的活性顺序为 :CaO >MgO >SrO。采用Hammett指示剂分别表征了碱土金属氧化物的碱强度。碱强度H-=15 0～ 18 4的碱性中心有利于异丙苯过氧化合成CHP反应。采用红外光谱分析了异丙苯在MgO、CaO催化剂表面的吸附态。异丙苯通过异丙基叔碳原子上的氢原子与CaO催化剂表面碱中心发生化学吸附 ,弱化了异丙基叔碳原子上的C—H键 ,从而有利于催化异丙苯氧化合成CHP的反应。MgO与异丙苯的异丙基叔碳上的氢原子的相互作用弱于CaO与异丙苯的异丙基叔碳上的氢原子的相互作用 ,使MgO催化异丙苯氧化的反应活性低于CaO催化异丙苯氧化的反应活性     

面向染料清洁生产和染料废水处理的纳滤技术

综述了纳滤膜对含盐染料溶液的分离原理、纳滤膜的选择、纳滤脱盐浓缩工艺过程与应用研究、纳滤处理染料废水与资源化方面的应用研究、纳滤技术的经济性以及应用过程中膜污染的控制。指出利用纳滤技术改进染料生产工艺是可行的,能够实现染料清洁生产,具有明显的经济效益和环境效益;采用纳滤处理染料废水,浓缩液和透过液可以分开处理,易于资源化,并且有利于染料废水的后继处理,是高浓度高含盐染料废水的一种有效处理方法。     

T型薄壁管节点应力集中系数有限元分析

通过有限元的方法,分析了T型薄壁管节点受平面内弯矩作用下的疲劳行为,得到了应力最大值的位置和拟合出用于预测T型薄壁管节点受平面内弯矩作用下的应力集中系数的参数公式。     

Determination of Lateral Extension of Hydrocarbon Concentration Sealing Caprocks by AVO Analysis

The caprock is one of the key factors for a reservoir, especially for a gas reservoir. Whether the caprocks can block off the gas is of significance for the accumulation and preservation of the gas reservoir. In this paper, we use the Amplitude versus offset (AVO) seismic technique to determine the lateral extension of the hydrocarbon concentration sealing caprocks. The essence of this technique is to detect the variations of the reservoir bed physical properties by monitoring the variations of the reflection coefficient of seismic waves upon the interfaces between different lithologies.Generally it is used to indicate hydrocarbon directly. For the hydrocarbon concentration sealing caprocks, the change of hydrocarbon concentration may cause the change of physical properties of the caprocks. Therefore it is possible to evaluate the hydrocarbon concentration sealing ability of the caprocks by AVO. This paper presents a case study using AVO to determine the lateral extension of the hydrocarbon concentration sealing caprocks. The result shows that this method is helpful for the exploration of the region.     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.