框架逆作深基坑变形特性三维数值分析

对基坑的变形特性进行数值分析在基坑设计中至关重要。结合实际工程框架逆作法超大基坑,选用Z Soil数值分析软件建立了全框架基坑模型并进行了数值模拟。由于需要考虑连续墙和土体之间的接触问题,土体则采用能够反映土体硬化特性的Hardening-Soil模型。为了更深刻的认识框架逆作法基坑变形的规律,并为设计者提供更好的参考,对影响框架逆作法基坑变形的一些主要参数进行了系统研究,包括框架梁截面尺寸、框架梁水平支撑竖向间距以及围护桩桩径等。结果表明:改变框架梁水平支撑竖向间距对围护墙的最大侧移、地表最大沉降有较大影响。增大围护桩桩径或框架梁的截面尺寸可以在一定程度上减小围护墙体变形,但超过某一定值时,其减小变形的效果将大大降低。     

鱼尾型机头中熔体流动的三维流场分析

本文利用ANSYS和MATLAB软件，对鱼尾型片材机头中熔体的速度、压力、剪切应力和粘度的分布进行三维有限元模拟和分析。探知了熔体在流道内的运动规律及特点并分析其原因，对口模设计具有定的指导作用。     

带长矩形接管受压圆简体的有限元分析与强度计算

本文运用有限元软件FEPG,建立了带长矩形接管受压圆筒体的三维参数化有限元模型,研究了矩形接管部位的应力分布特点,按照分析设计规范对带长矩形接管受压圆筒体进行了强度评定,并针对应力分布的不合理性提出了结构改进措施。     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

第95百分位人体头部有限元模型的构建及分析

为了获得人体头部的损伤机理,构建了研究所需的有限元计算模型,研究了人体头部生物力学响应.通过第95百分位中国人头部的CT扫描图像提取相关头部结构,利用三维医学建模软件和逆向工程软件进行几何模型的重构,借助有限元前处理软件构建具有较高生物仿真度的人体头部有限元模型.最后,使用有限元分析软件对模型进行仿真计算,仿真数据合理解释了头部损伤机理.     

模具沉积层应变的模拟

为分析沉积层应变的变化情况,并找出温度与形变的变化规律,采用有限元分析软件ANSYS计算并绘制不同时刻以及不同位置沉积层内的温度及应力应变曲线,在建立传热模型过程中考虑了金属液滴向沉积层的传热以及沉积层向系统外的热量散失等问题．采用在厚度方向以微小层逐层叠加来模拟涂层的增厚,并以此为基础构造沉积层有限元计算模型,应用单元生与死逐层激活层单元参与计算过程．实现移动边界以充分模拟真实的喷涂沉积过程．通过分析不同时刻以及不同位置沉积层内的应力应变曲线,获得了沉积层应力应变变化规律．结果表明,沉积层内存在残余塑性应变,且沉积层与母模接触部位等效应力最大,是最易翘曲的地方,验证了沉积层失稳的一般形式．     

2D FEM analysis for coupled thermo-hydro-mechanical-migratory processes in near field of hypothetical nuclear waste repository

In order to consider the influence of temperature and stress fields on the migration of radioactive nuclide with underground water movement, an elastoplastic model and a 2D FEM code for analysis of coupled thermo-hydro-mechanical (THM) processes in saturated and unsaturated porous media were extended and improved through introducing the percolation and migration equation, so that the code can be used for solving the temperature field, flow field, stress field and nuclide concentration field simultaneously. The states of temperatures, pore pressures and nuclide concentrations in the near field of a hypothetical nuclear waste repository were investigated. The influence of the half life of the radioactive nuclide on the temporal change of nuclide concentration was analyzed considering the thermo-hydro-mechanical-migratory coupling. The results show that, at the boundary of the vitrified waste, the concentration of radioactive nuclide with a half life of 10 a falls after a period of rising, with the maximum value of 0.182 mol/m3 and the minimum value of 0.181 mol/m3 at the end of computation. For a half life of 1 000 a, the concentration of radioactive nuclide always increases with the increase of the time during the computation period; and the maximum value is 1.686 mol/m3 at the end of the computation. Therefore, under the condition of THM coupling, the concentration of radioactive nuclide with a shorter half life will decrease more quickly with water flow; but for the radioactive nuclide with a longer half life, its concentration will keep at a higher level for a longer time in the migration process.     

Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel

According to the stress-strain curves of single-phase martensite and single-phase ferrite steels,whose compositions are similar to those of martensite and ferrite in low Si-Mn-Nb dual-phase steel,the stress-strain curve of the low Si-Mn-Nb dual-phase steel was simulated using the finite element method(FEM).The simulated result was compared with the measured one and they fit closely with each other, which proves that the FE model is correct.Based on the FE model,the microstress and microstrain of the dual...     

Parameter fitting of constitutive model and FEM analysis of solder joint thermal cycle reliability for lead-free solder Sn-3.5Ag

The experimental tests of tensile for lead-free solder Sn-3.5Ag were performed for the general work temperatures range from 11 to 90 °C and strain rate range from 5×10⁻⁵ to 2×10⁻² s⁻¹, and its stress—strain curves were compared to those of solder Sn-37Pb. The parameters in Anand model for solder Sn-3.5Ag were fitted based on experimental data and nonlinear fitting method, and its validity was checked by means of experimental data. Furthermore, the Anand model was used in the FEM analysis to evaluate solder joint thermal cycle reliability. The results show that solder Sn-3.5Ag has a better creep resistance than solder Sn-37Pb. The maximum stress is located at the upper right corner of the outmost solder joint from the symmetric center, and thermal fatigue life is predicted to be 3.796×10⁴ cycles under the calculated conditions. Foundation item: Project(50376076) supported by the National Natural Science Foundation of China     

Finite Element Modeling and Modal Analysis of Complicated Structure with Bolted Joints

A contact bolt model is proposed as a new modeling technique to investigate the complex structure with bolted joints for modal analysis and compared with the coupled bolt model,and the test results are given.Among these models,the coupled bolt model provides the best accurate responses compared with the experimental results.The contact bolt model shows the best effectiveness and usefulness in view of operational time.The bolt models proposed in this study are adopted for a dynamic characteristic analysis of...