双质量块微振动陀螺设计与仿真

设计了一种能降低模态之间的机械耦合的电容式双质量块微振动陀螺.此陀螺能精确地匹配模态频率,而且可以克服重力加速度对输出检测电容的影响.利用ANSYS对结构进行了仿真和优化,得到驱动频率为1 010 Hz,检测频率为1 009 Hz,频率匹配系数达到0.099%.利用MATLAB进行系统仿真,得到结构灵敏度为31.61 fF/(rad.s-1)机械灵敏度为59.77 nm/(rad.s-1).     

储罐地震易损性数值仿真分析

为了研究储罐的抗震性能,忽略储罐罐壁的质量,将储罐中的液体质量简化为三质点体系模型,地基土由两个弹簧和两个阻尼器模拟.考虑罐体的平动和转动,建立了在水平地震激励下储罐的动力方程;给出了随机变量的概率模型和基于易损性理论的失效概率计算方法.通过对大庆某油库2×104 m3和5×104m3两种大型储罐进行数值仿真方法的地震易损性分析.结果表明:随着地震烈度的增大,储罐的易损性逐渐增大;5×104 m3储罐的抗震性能要好于2×104 m3储罐;2×104 m3和5×104 m3储罐的主要失效模式分别是抗失稳和抗提离.由此可见从多个失效模式对储罐进行地震易损性研究比从单一失效模式进行易损性研究更加科学.     

舰船防护结构穿甲后爆炸的数值仿真分析

为了研究冲击爆炸作用下舰船防护结构的破坏情况,将该结构简化为多层板架结构,借助于有限元程序LS-DYNA中的ALE算法,同时考虑穿甲和爆炸的作用,对其在穿甲后爆炸荷载作用下的非线性动态响应过程进行仿真分析,描述了钢板的破口形状、破口半径及板上单元等效应力随时间变化的情况,并与舷外接触爆炸对结构的破坏情况进行比较.结果表明穿甲后爆炸能对舰体内部造成破坏,因此它是一种比较理想的反舰攻击方式.     

一种面向对象体系结构的度量模型

针对面向对象体系结构的软件系统缺乏有效度量方法的现状,通过行为、逻辑、构件和部署4个互为补充的模型,对面向对象的软件进行了架构分析,并确定了度量数据的采集集合.基于架构分析获得的原始系统数据,吸收快速原型与白盒、黑盒的基本原理,作者提出了一种适合面向确定对象系统的功能-结构-原型度量模型FCPMM(Function Configuration Prototype Metric Model).结合面向对象的基本准则与基本遗传算法,导出了该模型的循环收敛算法,从而可动态求解软件系统的最优状态.最后利用Matlab仿真实例,从度量参数适应度和最佳个体解码值两个方面验证了该算法的可行性.     

平面连杆机构的计算机辅助设计与仿真研究

基于机构组成原理,建立了基本杆组的数学模型,给出了设计连杆机构的算法,实现了机构的虚拟”组装”、可视化动态仿真与运动分析。通过压床机构设计与运动分析仿真实例,证明这种方法便于连杆机构的方案设计与修改,有利于参数化设计与控制,为研究设计平面连杆机构提供了一种直观、快捷的方法。     

MATLAB在经编织物几何特性探讨中的应用

本文主要介绍了经编织物的线圈几何结构及其应用性;用MATLAB语言模拟出真实的线圈及组织结构;分析编链组织,建立起相应的模型,实现在模拟出的织物上进行仿真,并与实际结构进行比较。     

Effect of SiO2 addition on the dielectric properties and microstructure of BaTiO3-based ceramics in reducing sintering

The effect of SiO2 doping on the sintering behavior,microstructure,and dielectric properties of BaTiO3-based ceramics has been investigated.Silica was added to the BaTiO3-based powder prepared by the solid state method with 0.075mo1%,0.15mo1%,and 0.3mo1%,respectively.The SiO2-doped BaTiO3-based ceramic with high density and uniform grain size were obtained,which were sintered in reducing atmosphere.A scanning electron microscope,X-ray diffraction,and LCR meter were used to determine the microstructure as well as the dielectric properties.SiO2 can form a liquid phase belonging to the ternary system of BaO-TiO2-SiO2,leading to the formation of BaTiO3 ceramics with high density at a lower sintering temperature.The SiO2-doped BaTiO3-based ce-ramics can be sintered to a theoretical density higher than 95% at 1220℃ with a soaking time of 2 h.The dielectric constants of the sample with 0.15mo1% SiO2 addition sintered at 1220℃ is about 9000.Doping with a small amount of silica can improve the sinter-ing and dielectric properties of BaTiO3-based ceramics.     

Design and dynamic simulation of hydraulic system of a new automatic transmission

A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization. Foundation item: Project(911901204) supported by Youth Innovation Foundation of Beijing University of Aeronautics and Astronautics     

Power management unit chip design for automobile active-matrix organic light-emitting diode display module

A power management unit (PMU) chip supplying dual panel supply voltage, which has a low electro-magnetic interference (EMI) characteristic and is favorable for miniaturization, is designed. A two-phase charge pump circuit using external pumping capacitor increases its pumping current and works out the charge-loss problem by using bulk-potential biasing circuit. A low-power start-up circuit is also proposed to reduce the power consumption of the band-gap reference voltage generator. And the ring oscillator used in the ELVSS power circuit is designed with logic devices by supplying the logic power supply to reduce the layout area. The PMU chip is designed with MagnaChip’s 0.25 μm high-voltage process. The driving currents of ELVDD and ELVSS are more than 50 mA when a SPICE simulation is done.     

A sink moving scheme based on local residual energy of nodes in wireless sensor networks

In the application of periodic data-gathering in sensor networks, sensor nodes located near the sink have to forward the data received from all other nodes to the sink, which depletes their energy very quickly. A moving scheme for the sink based on local residual energy was proposed. In the scheme, the sink periodically moves to a new location with the highest stay-value defined by the average residual energy and the number of neighbors. The scheme can balance energy consumption and prevent nodes around sink from draining their energy very quickly in the networks. The simulation results show that the scheme can prolong the network lifetime by 26%–65% compared with the earlier schemes where the sink is static or moves randomly. Foundation item: Project(60673164) supported by the National Natural Science Foundation of China; Project(20060533057) supported by the Specialized Research Foundation for the Doctoral Program of Higher Education of China