基于两次丢包策略的主动队列管理算法研究

针对网络拥塞现象,基于两次丢包方法建立了一种新的主动队列管理算法TDPQW。该算法利用M/G/1排队模型推导了实际队列长度和等待时间的数学表达式,以此提出在队列头部和队中随机位置进行丢包的策略。同时,通过仿真实验对比分析了该算法与RED、DROP-TAIL算法的性能,结果表明TDPQW具有较好的适应性。     

EXTERNAL FLUID HEATING OF A POROUS ED

This work deals with the thermal analysis of externally heated porous beds of finite length. A one dimensional model was developed that includes conduction and storage in both the fluid and bed, convective exchange between the fluid and bed, and the effect of adsorption/desorption in the bed. This model results in two coupled differential equations for the fluid and bed temperatures as functions of four independent dimensionless parameters. These equations were solved numerically using finite difference approximations. A truncation error analysis was carried out to maintain an accurate solution. The method of normalization is such that the results of this analysis are of use in bed design when the breakthrough characteristics in finite length beds are of interest. A method to measure bed thermal performance is defined and a means to optimize bed thermal performance is presented. An experiment was conducted to validate the numerically obtained results. A comparison of numerical to experimental results is presented     

Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate

Alumina (Al₂O₃) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H₂SO₄ at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al₂O₃ stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al₂O₃ layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used.     

制袋机薄膜速度传感方法与定长控制

提出了实现薄膜张力传感的薄膜速度传感方法,设计了基于ARM处理器和嵌入式实时操作系统的薄膜定长伺服控制系统。采用巧妙的机械变换技术实现薄膜长度变化的传感,从而建立具有线性特性的薄膜速度传感数学模型。采用ARM7 TDMI核心处理器和μC/OS-II嵌入式实时操作系统平台,研发了薄膜定长伺服控制系统。核心技术成功应用到双列中封高速制袋机的控制系统中,运行速度达到24000 P/h,成品率超过99.6%。     

基于CMOS工艺钨微测辐射热计阵列集成芯片的设计与制作

采用0.5μm标准CMOS工艺和微机械加工工艺,设计并制作了低成本4×4钨微测辐射热计阵列集成芯片。阵列中每个钨微测辐射热计均由微悬桥结构和钨热敏电阻组成,CMOS读出电路集成在阵列下方。微悬桥结构由表面牺牲层技术实现,不需要任何的光刻工艺。钨微测辐射热计像元尺寸为100μm×100μm,填充因子为20%。测试结果表明,在真空环境下,钨微测辐射热计等效热导为1.31×10-4W/K,等效热容为1.74×10-7J/K,热时间常数为1.33 ms。当红外光源的斩波频率为10 Hz时,钨微测辐射热计的电压响应率为1.91×103V/W,探测率为1.88×107cm·Hz1/2/W。     

双官能基改性聚有机硅氧烷的合成及应用研究进展

介绍了氨基和聚醚改性聚硅氧烷、氨基和酰氨基改性聚硅氧烷、氨基和长链烷烃改性聚硅氧烷、环氧基和聚醚改性聚硅氧烷及羧基和长链烷烃改性聚硅氧烷等双官能基改性聚有机硅氧烷的特性，简述了合成过程及应用工艺，并对其前景进行了预测。     

长链羧酸铕四元配合物的合成及其发光性质

合成了铕与长链羧酸、二苯甲酰甲烷、邻菲啰啉形成的四元配合物,用元素分析、红外光谱、核磁共振氢谱和紫外光谱对所合成的铕四元配合物进行了表征。由于长链羧酸的引入,铕配合物在氯仿等挥发性有机溶剂中具有良好的溶解性,这为今后与高分子基体复合创造了条件。铕配合物在342nm光波激发下,发出以铕的特征发射谱线612nm左右为主的强荧光。     

薄壁注塑成型技术

由于3C产品向“轻、薄、短、小”方向发展得越来越快，所以薄壁注塑成型技术也受到人们高度重视。介绍了薄壁注塑成型技术产生的背景及其优点，分析了薄壁注塑成型的定义，综述了薄壁注塑成型中的注塑机、模具设计、制品设计和材料选用，探讨了薄壁注塑成型中所面临的主要问题。     

不同添加剂对SrAl2O4:(Eu,Dy)磷光体发光性能的影响

在较低的温度下用燃烧合成法快速合成了 Eu2 ,Dy3 掺杂的SrAl2O4长余辉磷光体发光材料.研究了P2O5,CaF2,H3BO3,NaF 几种添加剂对SrAl2O4:(Eu,Dy)粉体发光性能的影响.结果发现:H3BO3和P2O5的添加有利于改善磷光体的发光性能,而在配料中加入CaF2和NaF,磷光体发光效率降低.随着这几种添加剂的加入,SrAl2O4:(Eu,Dy)磷光体材料发射光谱的主发射峰不同程度的出现蓝移.根据实验结果分析了添加剂的作用机理.     

短纤维直径对橡胶复合材料性能的影响

制备了 3种具有不同直径、相同长径比及其分布的涤纶短纤维增强氯丁橡胶基复合材料。对屈服强度及伸长率、断裂强度及伸长率以及撕裂强度等力学性能的研究发现 :在相同长径比及其分布情况下 ,与传统混合法则不同的是屈服强度和伸长率不相等 ,也不是只取决于短纤维的直径 ,而是受直径和长度的共同作用 ;在相同的纤维体积分数时 ,复合材料的断裂强度基本相同 ,而断裂形变和撕裂强度随纤维直径的减小而增大