SAR车辆信号仿真与微动特性分析

合成孔径雷达(SAR)由于其自身条件的限制,导致在日常的研究中需要人为的在计算机上对其信号进行一些仿真。在得到的仿真信号中包含着目标的微动信号,这些微动信号对应着目标的微动特性,它们是目标的本质属性,是目标特性研究的重点。而微动特性又会受到目标和雷达参数等的影响,因此,需要对不同参数下目标的微动特性进行研究。主要以机载SAR为模型,构建模型仿真,并对目标参数、雷达参数、仿真参数等进行完整的特性分析。其中仿真主要采用散射点模型,运用采样序列分段置零的仿真方法构建仿真模型;再运用时频分析方法对得到的仿真结果进行特性分析;由于场景中很多参数如PRF、车身速度、车轮半径、散射点采样个数、车身运动方向与方位向夹角等会对目标的微动特性产生影响,因此,改变这些参数再用时频分析方法对不同参数下的仿真结果进行分析,并最后对其进行总结来研究目标的微动特性。     

Study of Hydrodynamics,Mixing and Gas‐Liquid Mass Transfer in a Split‐Rectangular Airlift Reactor

Global hydrodynamic characteristics, liquid mixing and gas‐liquid mass transfer for a 63 L split‐rectangular airlift reactor were studied. Correlations for gas holdup and overall liquid circulation velocity were derived for the air‐water system as a function of the specific power input; these were compared to data and correlations for reactor volumes between 4.7 L and 4600 L. A partial recirculation of small bubbles in the riser was observed when U_gr > 0.03 m/s, which was attributed to the use of a single‐orifice nozzle as the gas phase distributor. The dimensionless mixing time and the overall axial dispersion coefficient were nearly constant for the range of gas flow rates studied. However, values of K_L/d_B were greater than those reported in previous studies and this is caused by the partial recirculation of the gas phase in the riser. While scale effects remain slight, the use of a gas distributor favouring this partial recirculation seems adequate for mass transfer in split‐rectangular airlift reactors.     

复杂运动目标ISAR成像技术进展与展望

逆合成孔径雷达成像是宽带雷达实现目标信 息获取和精细描述的重要途径,但在成像过程中存在复杂运动导致散焦和成像分辨率不高两 个难题。针对目标复杂运动导致成像散焦问题,本文总结了微动对雷达波调制、进动目标成 像、 三维运动成像、分离部件成像等技术现状;针对成像分辨率不高问题,分析了多频段宽带回 波相参配准、融合成像等技术进展。本文介绍了雷达成像新技术,为解决上述两个难题带来 新的思路和途径,其中,雷达关联成像不依赖于雷达与目标的相对运动,可避免成像的复杂 运动补偿;太赫兹雷达成像容易实现大带宽和窄波束,获得目标精细雷达像。最后对新兴技 术的难点和发展趋势进行了展望。     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

基于宇宙计算的图形处理器算法实现

下一代观测望远镜将会产生数以亿计的星系测量数据值,这将导致使用中央处理器处理数据时效率低下、成本较高。为了解决这一问题,提出了基于宇宙计算的图形处理器算法。研究了两点式角相关函数以及孔径质量统计这两种宇宙学的计算方法,构建算法代码,并使用统一计算设备架构在图形处理器上实现了这两种算法;比较了算法在中央处理器和图形处理器上使用的运行速度。实验结果表明,与中央处理器相比,使用图形处理器的计算速度得到了显著提高。     

带长矩形接管受压圆简体的有限元分析与强度计算

本文运用有限元软件FEPG,建立了带长矩形接管受压圆筒体的三维参数化有限元模型,研究了矩形接管部位的应力分布特点,按照分析设计规范对带长矩形接管受压圆筒体进行了强度评定,并针对应力分布的不合理性提出了结构改进措施。     

New time-“frequency rate” distribution for polynomial phase signal

Time-"frequency rate" distribution(TFRD)is an extension of the traditional time-frequency distribution(TFD),and it exploits the relationship between time and frequency rate,or the second order phase derivative of signal.A new TFRD highly concentrated along the frequency rate of polynomial phase signal(PPS)is presented,which provides a new way to PPS.It has been defined by introducing signal with a complex argument in the time-"frequency rate" analysis,and the inner interferences caused by the nonlinearity of the signal’s phase can be reduced greatly with high time-frequency concentration.Implementation of the TFRD is discussed and the results are demonstrated by the application for accelerated target imaging of synthetic aperture radar(SAR).     

基于ROC融合准则的SAR边缘检测算法

根据ROC(receiver operating characteristics)技术能评估分类器在所有可能工作阈值下总体性能的特点,建立包含边缘像素点相关分析与ROC分类决策的ROC融合准则。依据该准则组合多种SAR边缘检测算子,并得到合成孔径雷达(SAR)影像的理想边缘检测结果。实验结果表明,本文方法能融合多种边缘检测算子的优点,有较强的开放性与目标适应性,并且不需要手工设置阈值,自动化程度高,有很强的工程实用性。     

矩形截面深梁的一个新理论及其应用

综合考虑梁截面转动、相邻截面剪切变形和横向压力等影响推导出弯曲矩形截面深梁的新理论。作为算例,应用虚拟功的互等法具体求解了在均布载荷作用下两端简支深梁的弯曲问题,给出了这种情况的数值计算结果,与ANSYS有限元结果进行了对照,验证了该新理论的正确性。     

基于KSVD和PCA的SAR图像目标特征提取

提出一种基于核的奇异值分解(KSVD)与主成分分析(PCA)相结合的SAR图像目标的组合特征提取方法。该方法首先利用核的奇异值分解得到图像非线性的代数特征,然后进一步经过PCA变换得到图像的最终分类特征。实验中,将本文提出的KSVD+PCA两步特征提取方法与PCA、SVD、KPCA、KSVD方法分别结合简单、快速的最近邻分类器在MSTAR坦克数据上进行了比较,实验结果表明,KSVD+PCA方法不仅有效地提高了目标的正确识别率,而且大大降低了对目标方位的敏感度,在目标方位信息未知的情况下,识别率可达到95.75%,是一种有效的SAR图像目标特征提取方法。