Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

镨掺杂分布对1.3μm光纤放大器特性影响

对掺氟化镨玻璃光纤放大器的小信号增益，用广义的高斯近似公式可获得精确的分析表达。文中研究了限制光纤芯层中央部分的镨掺杂对光纤放大器特性的影响，结果发现限制镨掺杂分布能改进光纤放大器的工作效率，且截止波长比芯层全部均匀掺镨的光纤更长。     

引进型国产300MW汽轮机窜轴事故分析及防止对策

通过引进型国产300MW汽轮机在启动试运中出现的一次窜轴事故,根据计算机追忆打印的有关图表、数据分析了产生事故的原因,并提出了为防止类似事故重演应采取的措施和建议。经采取措施后该机组多次又在相同情况下启机,已安全运行。说明分析正确,措施得当,值得同类型机组借鉴。     

Hydrogen incorporation in Ni–P films prepared by electroless deposition

Electroless NiP films, with 12 to 16 wt % P, were deposited from a moderately acid solution. Thermogravimetric analysis indicates the presence of occluded hydrogen in the layers, which desorbs upon heating. The amount of incorporated hydrogen decreases when the pH of the solution or the nickel sulfate concentration is increased; by contrast it increases with hypophosphite concentration. Cyclic voltammetry, using an electrochemical quartz crystal microbalance, confirms the existence of parasitic reactions, namely the reduction of protons of the solvent during the cathodic process and oxidation of hydrogen during the dissolution of the layers. This behaviour is in qualitative agreement with the proposed reaction scheme.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

高压高产井电子压力计直读试井应注意的几个问题

在高压高产井电子压力计直读试井中，推荐选用石英作为压力传感器的压力计，附加适量的加重杆，保证压力计顺利入井，并平稳工作；同时选用可靠的井口防喷系统。     

XDGAM、P2 HD的性能测试对比

通过XDCAM、P2HD在大洋D^3-edit、D^3-edit HD、苹果非编上的测试，分析各自的特点，总结出相应的工作流程，为下一步的设备选型和应用打下基础。     

表面引发剂对熔融铝合金直接氧化生长的影响

为了控制熔融铝合金直接氧化法制备Al2O3/Al复合材料的氧化生长,采用ZnO,SiO2和MgO3种表面引发剂,研究它们对Al-Si-Zn合金氧化生长过程及Al2O3/Al复合材料组织形貌的影响.结果表明:与未使用引发剂时相比,使用SiO2,ZnO或MgO表面引发剂制备的粉末都能显著地缩短Al-Si-Zn合金的氧化生长孕育期,提高合金氧化生长速率,改善复合材料的胞状生长方式,提高复合材料的组织均匀度和致密度,为实际生产应用提供了依据.实验发现:ZnO表面引发剂的使用效果最为突出,其最佳添加量为12mg/cm2.     

利用扩增片段长度多态性(AFLP)研究坛紫菜的遗传变异

应用AFLP技术对浙江普陀列岛、渔山列岛和南麂列岛野生坛紫菜、福建野生厚型及薄型以及栽培坛紫菜的两个表型分化类型进行了研究。结果表明：坛紫菜的遗传变异较为丰富，共记录了528个位点，其中16个为单态位点，其余的为多态位点，多态位点比例达到96.97%。其遗传距离与地域分布正相关，说明不同的环境因素可能是造成坛紫菜遗传变异的主要因素。对遗传距离进行UPGMA和Neighbor-joining聚类分析表明具有薄型叶片性状的浙江野生坛紫菜和福建野生薄型坛此菜聚合，而福建野生厚型与栽培具厚型叶片，当地俗称为木耳菜的样本聚合。该结果基本清楚地反映了坛紫菜表型特征的分化。栽培薄型叶片俗称鸡毛菜样本在不同聚类方法中分别于外侧并入不同的分支。在福建野生坛紫菜与养殖坛紫菜的AFLP图谱中仅发现了三条与叶片性状相关的谱带：具有厚型叶片性状的坛紫菜共有的ACC-CAA(100)和ACT-CAG(232)，具有薄型叶性状的坛紫菜共有的ACC-CAA(490)。