一种基于模型预测的永磁同步电机直接转矩控制策略

针对传统直接转矩控制(DTC)方法中电压矢量切换时间不固定以及电压矢量切换点受限于滞环宽度等问题,将模型预测控制(MPC)应用于永磁同步电机(PMSM)DTC系统,提出了一种优化的电压矢量预测选择方法。一方面,将预测的定子磁链和电磁转矩送入相应的滞环控制器,从电压矢量有限集中选择合适的电压矢量以确保预测的磁链和转矩分别在各自的滞环内;另一方面,引入代价函数和优化策略,选择不同情况下相应的最优电压矢量,且可以同时考虑电流保护等额外的控制目标。在一台凸极PMSM驱动平台上对所提出的控制策略进行了试验验证。试验结果表明,所提出的控制策略能够有效地将转矩控制在滞环内,验证了该策略的有效性。     

基于改进快速幂次趋近律的永磁同步电机滑模控制

针对永磁同步电机(PMSM)滑模控制指数趋近律中趋近速度与抖振之间的矛盾问题,基于快速幂次趋近律提出一种幂次项系数自适应调节的新型趋近律。所提趋近律将系统状态引入幂次项系数中,实现了系统状态由较远处到滑模面附近的趋近过程中加入幂次项的作用,在保证幂次项特点的前提下,动态响应过程的收敛速度大大提高。负载转矩是滑模速度控制器中的一个扰动项,设计了带有幂次项的滑模观测器,将观测值作为转矩前馈补偿。仿真结果表明,与快速幂次趋近律相比,所提趋近律具有更快的收敛速度,负载观测器能准确跟踪负载变化,提升了系统抗扰性能。     

基于矢量拟合法的永磁同步电机EMI模型

电动汽车中永磁同步电机常采用星型联结,因此建立星型联结的永磁同步电机高频阻抗模型是有必要的。首先,采用常见的电机EMI模型（π型）作为星型联结的永磁同步电机EMI模型,使用矢量拟合法推导电机EMI模型等效电路的阶数。在20 Hz~30 MHz范围内,永磁同步电机π型EMI模型的等效电路需要225个储能元件,为了降低电机EMI模型等效电路的复杂性,进一步分析了Γ型阻抗模型和反Γ型阻抗模型,将星型联结的永磁同步电机EMI模型的等效电路储能元件数降到56个。通过对比3种阻抗模型的端口阻抗特性,验证EMI模型优化方法的可行性。将电机EMI模型的等效电路代入电机驱动EMI仿真系统中进行时域仿真,仿真时域波形经EMI接收机模型处理得到噪声频谱。在150 kHz~30 MHz频率范围内,电动机驱动系统EMI接收机测试结果与仿真结果基本一致。     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

Mo的替代对FeNbBCu软磁纳米晶合金磁谱的影响

本文研究了Fe82Nb7-xMoxB10Cu1(x=0,1,3,5）系列纲伙晶软磁合金中Mo的含量对磁导率谱（频率范围1kHz-1MHz)的影响，并用畴壁钉扎理论进行了解释，在磁谱中观测到随着Mo含量的增加，弛豫频率线性地上升，μ′随外加磁场幅度变化曲线表明其原因在于Mo的替代导致了钉扎场的增强。     

Nanocrystalline Nd2Fe14B／α—Fe permanent magnet

Nd8.5Fe75Co5Cu1Zr3Nb1B6.5bonded magnet was prepared by melt-spinning(vs=18m/s)and subsequent heat treatment(670℃，4min).Excellent magnetic properties of the bonded magnet were achieved:Br=0.68T,iHc=620.3kA/m,(BH)max=74kJ/m^3.The addition of Cu and Zr elements shows to be advantageous in improving an intrinsic coercivity and squareness of hysteresis loop,as well as energy product.In has a remarkable remanence enhancement and the isotropic saturation remanence ratio Mr/Ms is 0.83.     

磁性材料产业现状与展望

介绍磁性材料的主要品种，如永磁体、软磁体和磁记录介质材料的行业现状及技术进步。     

基于磁流变阻尼器的车辆悬架系统模糊半主动控制

在对磁流变液和磁流变阻尼器的研究基础上 ,以磁流变阻尼器作为半主动控制元件组成模糊半主动悬架系统。运用数值仿真和试验研究等方法对基于磁流变阻尼器的模糊半主动悬架进行了研究。数值仿真和试验结果表明 ,设计的模糊半主动控制算法可对基于磁流变阻尼器的半主动控制悬架实现有效的控制     

Study on Sintered Synthetic Hercynite Clinker

Special grade bauxite and roll scale were used as raw materials to investigate the influences of reducing atmosphere and firing temperature on sintering clinker. The results showed that: 1) The mixture of the materials could be sintered enough to synthesise hercynite under reducing atmosphere by adding reducing reagent ; 2) The hercynite dinker could be sintered to high density and the content of FeAl2O4 may attain 80～90% under the firing tempera-ture of 1550℃.     

WATER MIST FLOW IN A SUPERCONDUCTING MAGNET INCLINED AT VARIOUS ANGLES

Water mist (diamagnetic) flow in a superconducting magnet of 10 T at various angles is studied experimentally and numerically. Water mist is produced by ultrasonic atomizers and fed into a cylindrical Plexiglas pipe (inner diameter, 90 mm) placed in a bore space of an inclined superconducting magnet. The water mist is found to stop at some locations in the magnet at inclined angles ψ ≤ π/6. At ψ ≥ π/4, the amount of mist flowing out of the other opening of the pipe increases with an increase in inclined angle. In the computation of this phenomenon, water mist is simulated with 1000 water droplets of 3 μm diameter. Brownian motion is considered and the Langevin equation is solved. The numerical results show that at ψ ≤ π/6, most of the water droplets accumulate above the magnetic coil. However, at ψ ≥ π/4, with an increase in inclined angle, the number of water droplets passing through the magnetic coil increases.