Fabrication of high-efficiency anatase TiO2 photocatalysts using electrospinning with ultra-violet treatment

In metal oxide nanofiber fabrication using the electrospinning method, heat treatment is performed at temperatures of 500°C or higher for crystallization and polymer desorption. Therefore, it is difficult to fabricate low-temperature phase metal oxides that crystallize at low temperatures. TiO₂, a representative metal oxide often used as photocatalysts, is known to have higher photocatalytic activity in the low-temperature phase (anatase structure) than in the high-temperature phase (rutile structure). Studies on the fabrication of TiO₂ anatase nanofibers using conventional electrospinning have reported disadvantages such as the partial expression of rutile structures and low crystallinity. This study developed an anatase TiO₂ nanofiber as a high-efficiency catalyst based on the electrospinning method and a residual organic matter cleaning method that employs ultra-violet (UV) light. We fabricated nanofibers using the electrospinning method and implemented TiO₂ nanofibers with the anatase structure through heat treatment at 260°C. Residual organics remaining after heat treatment of the fabricated crystalized TiO₂ nanofibers were removed by exposing them to UV light, thereby improving photocatalytic efficiency. The photocatalytic efficiency of the fabricated TiO₂ nanofibers was confirmed through a methylene blue (MB) decomposition experiment under visible light irradiation. The photocatalytic efficiency (time taken for the concentration of the MB solution to reach 50%) of the UV-treated TiO₂ nanofibers was approximately six times higher than of P25 and the heat-treated nanofibers.     

Method for calculating dynamic yield stress of fresh cement pastes using a coaxial cylinder system

The calculation of the rheological parameters of fresh cement pastes plays a key role in understanding the rheology of cement-based mixes. Because cement paste is not a simple Bingham fluid, a suitable nonlinear model must be found for characterizing its flow. A test system in which the rotational speed or shear rate can be changed in multiple steps is regarded as a suitable rheological test protocol because the paste reaches a steady state. Furthermore, theoretical derivations show that the solution of the Couette inverse problem corresponding to the modified Bingham model and the Herschel–Bulkley (H-B) model is complex. However, a comparative analysis revealed that the yield stress of fresh paste could easily be obtained through a calculation process based on a Parabolic model. This study presents the complete calculation procedure for this model. The influence of the plug flow is considered, and test points with low minimum shear stress (τ_min) are excluded. Finally, the accuracy of the proposed method is verified through comparisons with the results obtained using mini-cone slump tests. These results show that the dynamic yield stress calculated using the expression of the Couette inverse problem based on the Parabolic model in consideration of the plug flow is very close to the yield stress obtained using the mini-cone slump flow test. This proves that the proposed method could precisely characterize the dynamic yield stress of cement pastes.     

Polyvinylidene fluoride nanofibers obtained by electrospinning and blowspinning: Electrospinning enhances the piezoelectric β-phase – myth or reality?

Considerable effort has been devoted to improving the properties of PVDF (polyvinylidene fluoride), arguably the most technologically important piezoelectric polymer. Electrospinning has been found to be a particularly effective method of producing PVDF nanofibers with superior piezoelectric properties due to the resulting exceptionally high fraction of the piezoelectrically active crystalline β-phase. It is typically assumed that the high external electric fields applied during electrospinning enhance the formation of this β-phase, with the confused literature offering various unsatisfactory mechanistic explanations. However, by comparing PVDF nanofibers produced by two different processes (electrospinning and blowspinning), we show that the electric field is entirely unnecessary; indeed, the crystallization dynamics are principally driven by the applied mechanical stress, as evidenced by structurally identical 200 nm diameter PVDF fibers produced with and without external electric fields.     

Superparamagnetic polyvinylpyrrolidone/chitosan/Fe3O4 electrospun nanofibers as effective U(VI) adsorbents

Magnetoactive electrospun fibrous membranes consisting of polyvinylpyrrolidone (PVP), chitosan (CS) and pre-fabricated, double-layer oleic acid-coated magnetite nanoparticles (OA.OA.Fe₃O₄) were fabricated and evaluated as new adsorbent materials for the removal and recovery of uranium (U(VI)) from aqueous solutions. The adsorption has been investigated by batch-type experiments and the solid material has been characterized by X-ray diffraction spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy/energy dispersive X-ray analysis (TEM/EDX) and vibration sample magnetometry (VSM) measurements prior and after uranium adsorption. The experimental adsorption data were found to be well fitted with the Langmuir isotherm and the pseudo-second order kinetic model. The results indicate that PVP/CS/OA.OA.Fe₃O₄ fibrous adsorbents exhibit good adsorption properties towards U(VI) in aqueous solutions, achieving a q_max value of 0.77 mol kg⁻¹ (183.3 mg g⁻¹) at pH 6.0. The experiments regarding the regeneration and reuse of the magnetoactive adsorbents were carried out using Na₂CO₃, at pH ~11. After four cycles, the percentage relative adsorption remained stable (~100%) whereas the desorption percentage decreased from 31.9% to 21.0%. Generally, the presented results demonstrate that the incorporation of the Fe₃O₄ NPs has a positive effect on the adsorption efficiency of U(VI) from aquatic environments.     

Hierarchically porous N-doped carbon nanofibers derived from ZIF-8/PAN composites for benzene adsorption

Coupling with electrospinning technique, metal–organic-frameworks (MOFs)-derived porous carbon fibers exhibit a great potential application in the adsorption of volatile organic compounds (VOCs) because of their huge surface area, high porosity, as well as sufficient heteroatom-doped active sites. In this work, the hierarchically porous N-doped carbon nanofibers are obtained after the pyrolysis of zeolite imidazole framework-8 and polyacrylonitrile (ZIF-8/PAN) composite fibers synthesized by electrospinning method. The N-doped carbon nanofibers fabricated in N₂ atmosphere (N-CF-N₂) present an enhanced adsorption capacity of 694 mg/g for benzene because of the synergistic effect of the hierarchically porous structure and the abundant N-species-containing active sites. It is also interesting that the N-doped hierarchical carbon nanofibers fabricated in Ar atmosphere (N-CF-Ar) exhibit a low benzene adsorption as compared with the N-CF-N₂, which can be attributed to the porous structure damage caused by the bombardment of heavy Ar atoms on the pore shells during the pyrolysis. These results not only show a promising application of the as-fabricated N-CF-N₂ in adsorption of VOCs for air purification due to its merit of cost-efficient, large-scale production, and excellent adsorption capacity, but also expand the potential of electrospinning technology and composite fibers in volatile organic gas adsorption.     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Experimental design to evaluate properties of electrospun fibers of zein/poly (ethylene oxide) for biomaterial applications

The production of polymer fibers from the combination of zein and PEO might have great potential in the field of biomaterial. Zein/PEO fibers were obtained in this work through solution electrospinning. An experimental design, 2^4-1, was used for evaluating the influences of PEO content in the blend, distance from the needle tip to the collector, applied electric voltage and solution flow for average fiber diameter and relative-yield process. Beyond this, the relationship between PEO content in the blend and the fiber properties were evaluated through FTIR, DSC, TG, tensile tests, and cytotoxic tests. The factor that exerts the greatest effect on the average fiber diameter response was the electrical voltage. The increase in PEO content in the blend decreased the thermal stability and increased the degree of the fibers' crystallinity. The mechanical tests showed that fibers with higher elongation were obtained at richer PEO blends. The fibers presented cytocompatible characteristics.     

A high Cr (VI) absorption efficiency and easy recovery adsorbent: Electrospun polyethersulfone/polydopamine nanofibers

Cr (VI) is a highly toxic pollutant to humans, to achieve high adsorption capacity, easy recovery, and good reusability, polyethersulfone/polydopamine (PES/PDA) ultrafine fibers were prepared successfully. A series of preparing effect factors were investigated systematically and the optimum one is 8.5 pH value at room temperature and 2 g/L dopamine concentration. And then they were used as an adsorbent for the removal of Cr (VI) ions from wastewater. The effect factors pH, the adsorbent dosage, and time were discussed on Cr (VI) adsorption process and the Cr (VI) adsorption behavior was investigated. It is found that the maximum Cr (VI) adsorption capacity is 115.2 ± 4.8 mg/g at pH = 3 using 0.06 g PES/PDA with 80 mins. The Cr (VI) adsorption process followed the pseudo-second-order model (r² ≥ 0.99) and adsorption isotherms were fitted to the Langmuir model (R² ≥ 0.999). Furthermore, the Cr (VI) adsorption mechanism was supposed according to the X-ray photoelectron spectroscopic results. Finally, PES/PDA ultrafine fibers were considered to be a promising adsorbent with good stability (decomposing temperature, 356°C), high adsorption efficiency (112.1 ± 2.5 mg/g), and good reusability (three times) on the coexistence of anions and the actual industry wastewater environment.     

Effects of the molecular structure from pitch fractions on the properties of pitch-based electrospun nanofibers

Mesophase pitch was separated into different pitch fractions to investigate the effect of pitch fractions on the properties of their nanofibers prepared by electrospinning. The evolution of different pitch fractions-derived nanofibers during stabilization and carbonization were explored, and the properties of the resultant carbon nanofibers (CNFs) as electrode materials for supercapacitor were compared. Results indicated that the hexane insoluble-toluene soluble (HI-TS) and toluene insoluble-tetrahydrofuran (THF) soluble (TI-THFS) fractions had good spinnability due to their narrow molecular weight distribution. Moreover, compared with HI-TS and THF insoluble (THFI), TI-THFS consisted of appropriate aromaticity and branched alkyl groups which promoted the stabilization and carbonization behaviors of its nanofibers, resulting in maintaining ideal fiber morphology of TI-THFS-derived nanofiber due to the mitigation of their exothermic reactions. Meanwhile, the TI-THFS-derived CNFs presented the highest surface area of 543 m² g⁻¹ and exhibited an excellent specific capacitance of 167 F g⁻¹ at 0.5 A g⁻¹ in 6 M KOH electrolyte.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.