甲醇在聚苯胺修饰铂钼共沉积电极上的催化氧化

用恒电位法和循环伏安法在铂电极上分别制备了聚苯胺修饰的分散氢钼青铜电极和分散铂电极,以及聚苯胺修饰的不同铂钼比例的铂与氢钼青铜共沉积电极。用循环伏安法研究了制备电极在c(H2SO4)=0.5mol/L水溶液中的电化学行为,以及对c(CH3OH)=0.1 mol/L的催化氧化行为。其中,分散氢钼青铜电极对甲醇无催化氧化的作用,铂与氢钼青铜共沉积电极对甲醇的催化氧化效果优于分散铂电极。铂-氢钼青铜共沉积电极对甲醇氧化的催化能力与共沉积铂钼的比例有关,当制备电极所用的溶液中n(氯铂酸)∶n(钼酸钠)=2∶1时,共沉积电极对甲醇的催化氧化活性最高,此时甲醇在共沉积电极上的氧化峰电流是单纯铂电极的2.632倍。     

钼矿尾矿铜铅重金属离子溶出规律研究

为了评估钼矿尾矿的环境危害,通过105 d连续静态浸泡试验,定期监测钼矿尾矿浸泡液的pH值及其铜铅重金属离子浓度,研究了尾矿的离子溶出规律.结果表明,尾矿对酸性溶液有很强的中和能力,可将pH=3.5～6的酸性溶液在8 d内中和到pH=7的中性状态,并维持不变.液固比为1:10的浸泡液中Cu~(2+)和Pb~(2+)的浓度都在25 d内达到最大值(分别为29.52和9.40μg/L),此后浓度下降,并发生震荡,但Cu~(2+)和Pb~(2+)的浓度随时间的变化趋势不同.浸泡液中Cu~(2+)和Pb~(2+)的平均浓度分别为19.37和4.29μg/L,尾矿中Cu和Pb的平均溶出率分别为0.097%和0.043%.钼矿尾矿可在中性条件下长期释放Cu~(2+)和Pb~(2+),且Cu比Pb更容易溶出.     

蛋白质增敏钼-邻苯二酚紫体系的研究及应用

在pH=2.8的clark-lubs缓冲介质中,牛血清白蛋白能显著增敏钼-邻苯二酚紫的显色体系,据此建立了分光光度法测定钼的新方法。仔细考察了反应酸度、邻苯二酚紫浓度、牛血清白蛋白浓度及反应时间等因素对测定的影响。最大吸收波长在680 nm处,与钼-邻苯二酚紫体系相比,红移了120 nm。10 mL溶液中,钼质量在0～40μg范围内服从比尔定律,测定的表观摩尔吸光系数为2.11×104L/(mol.cm)。所拟方法简便、快速、灵敏度高,用于合金钢样品中微量钼的测定,结果与认定值一致。     

福建某钼矿的工艺矿物学研究

研究了福建某钼矿的工艺矿物学特征,分析了矿石的化学组成,对矿石中钼和硫矿物的种类、成分、粒度、嵌布特征进行测定和统计,根据钼和硫的工艺矿物学研究结果,提出提高钼和硫的选矿回收率的建议．     

Synthesis of nanodispersed oxides of vanadium, titanium, molybdenum, and tungsten on mesoporous silica using atomic layer deposition

The advantages of the atomic layer deposition (ALD) method for preparation of tungsten, vanadium, titanium, and molybdenum oxide catalyst supported on mesoporous silica are discussed, with emphasis on the importance of synthesis conditions on dispersion, structure and activity of the resulting materials. A suite of complementary techniques such as DRS-UV/Vis, BET, ¹H-NMR, XRD, and TEM were used to study the structural properties of the supported metal oxides, and probe reactions such as 2-butanol dehydration and ethanol partial oxidation were used to demonstrate the potential advantages of the ALD-prepared catalysts. Specifically, highly dispersed oxides of titanium, molybdenum, and tungsten oxide on mesoporous silica were synthesized using the ALD method. It is also demonstrated that attainment of high dispersions of vanadium oxide on mesoporous silica requires the presence of at least a single layer of titanium oxide due to the well-known poor interaction between vanadia and silica. The highly dispersed catalysts prepared here by ALD methods exhibited superior catalytic performance relative to those prepared using conventional incipient wetness impregnation.     

铬基钨镍钼高耐磨合金耐磨机理及产业化

本文研究了铬基钨镍钼高耐磨合金的耐磨机理。重点分析了铬基钨镍钼高耐磨合金的铸造工艺流程、铸造用废砂回收再生树脂砂的利用技术以及基于铬基钨镍钼高耐磨合金的耐磨产品。结果表明:铬基钨镍钼高耐磨合金的各种成分在不同工况中具有良好的耐磨性能。     

Electrodeposition preparation of Nafion-Pt-HxMoO3 and its activity toward methanol oxidation

A composite catalyst Nafion-Pt-HxMoO3 was prepared on a glassy carbon by cyclic voltammetry methods in sulfuric acid solution containing Na2MoO4, H2PtCl6 and Naton, and its activity for the methanol oxidation was studied with Pt-HxMoO3 as comparison. It is found that the electrocatalytic activity and the stability of Pt-HxMoO3 are improved by the Nation. The activity of Pt-HxMoO3 reaches its maximum when the content of Nation in the preparation solution is 0.012%（mass fraction）. In this case the oxidation peak current of methanol on Nation-Pt-HxMoO3 is 1.76 times larger than that on Pt-HxMoO3 and keeps unchanged when the potential is set at 0.3 V （vs Hg-Hg2SO4） for 5 000 s in 1 mol/LCH3OH＋0.5 mol/L U2SO4 solution. The results from energy dispersive spectroscopy show that the content of Nation in the composite is 0.57%. The results from scanning electron spectroscopy show that the composite of Nafion-Pt-HxMoO has a gain size of about 90 nm and distributes more uniformly than Pt-HxMoO3.     

钼精矿供应紧张支撑钼市场

介绍了2006年上半年国际、国内钼市场的产量、供需平衡及进出口情况。西方世界钼产量平稳，钼价格呈现出上涨趋势。西方世界钼铁平均价格1月份为53．5～55．8美元／kg，6月份为58．71～60．07美元/kg，上涨9．72％；中国产钼铁在鹿特丹仓库现货价格1月份为50．99～53．70美元／kg，6月份为58．51～60．03美元／kg，上涨14．74％。分析了上半年国际、国内钼市场的形势，预测下半年国际钼市场钼精矿供应仍将紧张，副产钼供应平缓，因此下半年的钼市场将得到支撑。     

利用双层辉光放电形成Mo-N硬质镀层

用双层辉光放电在钛合金Ti6Al4V表面形成了Mo-N硬质镀层。用X射线衍射仪和纳米压入仪分别对镀层的相结构、硬度和弹性模量进行了研究，并用涂层压入仪对镀层与基体间的结合强度进行了测定。结果表明：Ti6Al4V表面形成了均匀的Mo—N硬质镀层，镀层厚约10μm，由面心立方结构Mo2N化合物构成；Mo2N硬质镀层的硬度和弹性模量分别为13．80GPa和261．65GPa;镀层与基体间具有较好的结合强度。     

Improvement of wear resistance of plasma-sprayed molybdenum blend coatings

The wear resistance of plasma sprayed molybdenum blend coatings applicable to synchronizer rings or piston rings was investigated in this study. Four spray powders, one of which was pure molybdenum and the others blended powders of bronze and aluminum-silicon alloy powders mixed with molybdenum powders, were sprayed on a low-carbon steel substrate by atmospheric plasma spraying. Microstructural analysis of the coatings showed that the phases formed during spraying were relatively homogeneously distributed in the molybdenum matrix. The wear test results revealed that the wear rate of all the coatings increased with increasing wear load and that the blended coatings exhibited better wear resistance than the pure molybdenum coating, although the hardness was lower. In the pure molybdenum coatings, splats were readily fractured, or cracks were initiated between splats under high wear loads, thereby leading to the decrease in wear resistance. On the other hand, the molybdenum coating blended with bronze and aluminum-silicon alloy powders exhibited excellent wear resistance because hard phases such as CuAl₂ and Cu₉Al₄ formed inside the coating.