高温对冶金窑窑体的影响

针对冶金回转窑窑体在高温下产生的失效进行数值分析，并在此基础上对冶金窑窑体的设计方法进行修正。     

用高分子复合材料修复轧管机组大型构件

介绍采用高分子复合材料修复用于钢管生产的轧管机组大型构件的方法。重点介绍机架轴承座孔的修复工艺流程 ,修复定位 ,技术操作要点及修复效果。     

高速供送螺杆动态性能评价体系的建构

随着设备高速化的日益发展，传统的螺杆设计方法及相应的供送特性评价体系已显落后。参照蜗型凸轮动力学性能的评价方法，建立了高速供送螺杆的动态性能评价体系，为高速化供送螺杆的设计提供了性能参照指标。     

基于Gibbs模型的提高图像分辨率方法

在提高图像分辨率过程中,选择合适的成像模型是获得高分辨率图像的一个关键因素。提出一种基于最大后验概率、采用Gibbs成像模型,并利用多帧序列图像重构高分辨率图像的方法,充分利用序列图像之间的累加信息,从而快速地获得较其他方法更优的高分辨率图像。     

Organosoluble and light-colored fluorinated polyimides derived from 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A novel fluorinated bis(ether amine) monomer, 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared through the nucleophilic aromatic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 2,3-dihydroxynaphthalene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. A series of new fluorine-containing polyimides having inherent viscosities of 0.54 to 1.10 dl/g were synthesized from the diamine with various commercially available aromatic dianhydrides using a standard two-stage process with thermal imidization of poly(amic acid) films. These polyimides were highly soluble in a variety of organic solvents, and most of them afforded transparent, light-colored, and tough films with good tensile strengths. These polyimides exhibited glass transition temperatures (T_gs) of 247-300 °C and showed no significant decomposition below 500 °C under either nitrogen or air atmosphere. Except for the polyimide derived from pyromellitic dianhydride, the polyimide films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 400 nm and low b∗ values (a yellowness index) of 10.7-41.9. These polyimides had dielectric constants of 3.09 to 3.65 (1 MHz) and moisture absorptions in the range of 0.2-0.3 wt%.     

一种新的HEMT小信号模型参数提取方法

介绍了一种高电子迁移率晶体管(HEMT)的小信号参数提取方法——综合多偏置点优化参数提取法。该文首先推导并提出了器件的模型、确定外部参数和内部参数，其次介绍了多偏置点优化算法。最后，以PHEMT器件为例进行鲁棒性和精确性测试，实验采用一系列随机起始值，结果表明，提取的参数值与经验值相差小于1％。     

大功率半导体激光器全固态风冷散热系统

设计并制作了一种全固态大功率半导体激光阵列恒温散热系统。它利用半导体制冷器对大功率半导体激光阵列吸热,然后经由风冷散热。经测试,单bar激光阵列连续输出功率达到15.28W,双 bar 阵列输出达 27.8W 时,全部达到风冷散热控温精度±0.1 ;当环境温度达到 45 时,仍然能够保证激光阵列的正常使用。     

钨金属化与氧化铝陶瓷高温共烧

阐述了钨金属化与氧化铝陶瓷高温共烧工艺的特点,分析了烧结过程中温度曲线和露点等工艺参数对钨金属化与瓷件结合强度、密封气密性和收缩率的影响。通过反复的试验和烧结机理分析对比,给出了最佳的控制参数。     

Corrosion behavior of NiCrMo Alloy 625 in high temperature, hydrogenated water

The corrosion behavior of NiCrMo Alloy 625 (UNS N06625) has been characterized in a 10,000 h test conducted in hydrogenated water at 260 °C. The corrosion kinetics were observed to be parabolic, the parabolic rate constant being determined by chemical descaling to be 0.074 mg dm⁻² h^−1/2. Characterizations of the corrosion oxide layer via grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy in combination with argon ion milling and target factor analysis, revealed the presence of two spinel oxide phases and significant amounts of recrystallized nickel. Based on the distribution of three oxidized alloying constituents (Ni, Cr, Fe) with respect to depth and oxidation state, it was concluded that: (a) corrosion occurs in a non-selective manner, but significant amounts of nickel(II) ions are released to the water, and (b) the spinel oxides exist as a chromite-rich inner layer (Ni_0.7Fe_0.3)(Cr_0.8Fe_0.2)₂O₄ underneath a coarser, ferrite-rich outer layer (Ni_0.9Fe_0.1)(Cr_0.1Fe_0.9)₂O₄. The trivalent cation distribution in each of these phases appears to represent a solvus in the immiscible NiCr₂O₄-NiFe₂O₄ binary.     

导磁不锈钢毛的结构化研究

研制了一种新型的结构化钢毛——胶结钢毛。和传统的普通钢毛相比,胶结钢毛具有很强的结构刚度和很低的钢毛流失量;同时,对高岭土有较高的除铁效率。