铝合金薄板尖边缘缺口试样的机械加工方法及缺口敏感性测试

介绍高强度铝合金薄板的尖边缘缺口拉伸试样的机械加工方法，用该方法制备的仿美７０７５、美制７０７５、国产ＬＣ４、ＬＣ９、ＬＹ１２、ＬＢ７３３等６种铝合金１６种热处理状态下的ＥＮ试样，其内率半径Ｒ满足了ＡＳＴＭＥ３３８－６８标准方法中Ｒｍａｘ０．０１８毫米的要求，并且达到Ｒ＜０．０１０毫米的特高精度。同时，还对仿美７０７５、美制７０７５、国产ＬＣ４的６种热处理状态下的缺口敏感性和宏观断口、以及选择仿美７０７５、ＬＹ１２对扫描断口形态进行了研究。     

线性联合检测算法在TD-SCDMA系统中的性能分析与比较

时分、同步码分多址（TD－SCDMA）系统是基于时分双工（TDD）的块传输系统，它使用了联合检测这项关键技术来抵抗符号间干扰（ISI）和多址干扰（MAI）。以上行链路为例，本文分析了三种线性联合检测算法－－匹配滤波块均衡器（MF－BLE）、迫零块均衡器（ZF－BLE）和最小均方误差块均衡器（MMSE－BLE）。从理论上，我们描述了这三种线性联合检测算法的基本原理，并对它们进行了比较（包括抗干扰性能和计算量）。随后，我们模拟了不同参数条件下（信道模型、码道数目、天线数目）这几种算法的性能，并与理论分析进行对照，得出一定结论。     

基于神经网络的河道浅滩演变预测模型

河道浅滩演变是一个复杂的非线性动力学过程, 作者借助神经网络处理非线性问题的优势, 在分析影响河道浅滩演变因素的基础上, 建立了预测河道浅淮演变的BP网络模型, 并对模型中的输入因子和样本的提取进行了探讨. 以闽江竹岐至侯官河段为实例,用“试控法”给出了BP网络模型的建模方案, 用正交设计原理选取相应的训练样本集, 利用该样本集对网络进行学习和训练, 并用训练好的BP网络模型预测浅滩上年内最小水深和年平均淤积厚度. 计算结果表明: 模型预测结果与实际值吻合良好. 这为河道浅滩演变预测研究提供了新方法.     

Rhizobium trifolii capsular polysaccharide: a novel biopolymer with striking physical properties

The physical properties of the capsular polysaccharide of Rhizobium Trifolii (CPS) were investigated. Viscosity measurements provided information about the hydrodynamic volume of single coils, the perturbation of solvent flow and the shear-thinning behaviour of concentrated solutions. Changes in chain geometry and the development of an intermolecular network as a function of temperature were monitored using the techniques of optical rotation and dynamic oscillation. Finally, analysis of calorimetric thermograms elucidated the type of interactions between CPS and the bacterial levan. Overall, the Rhizobium polysaccharide was found to form thermally-reversible gels at an extremely low 'minimum critical gelling concentration' (c_o∼ 0.35gl^-1). At temperatures above the gel melting point (∼ 48°C), however, the compact polymer coils entangled at comparatively high concentrations (about 60 times higher than c_o). In the presence of a highly branched levan, the thermal stability of ordered CPS structures increased as a consequence of thermodynamic incompatibility between the two polymers.     

激光粒度分析仪测定氢氧化铝细颗粒方法的探讨

针对马尔文2000型激光粒度分析仪在氢氧化铝分析中对25μm粒径以下细颗粒的分析不太敏感，难以满足氧化铝生产分解过程对粒度控制的要求，对试验样品采用一些非常规的特殊处理方法，以提高细小颗粒在处理过样品中所占的体积百分比；研究了不同的样品处理方式对分析结果的影响。试验结果表明，只有对洗涤、过滤后的湿样进行分析，才能对分解料浆样品中的细颗粒的粒度分布进行准确地分析，得到满足试验和生产过程控制精度的结果。     

On the design of multiple key hashing files for concurrent orthogonal range retrieval between two disks

This paper concerns the following problem: given a set of multi-attribute records, a fixed number of buckets and a two-disk system, arrange the records into the buckets and then store the buckets between the disks in such a way that, over all possible orthogonal range queries (ORQs), the disk access concurrency is maximized. We shall adopt the multiple key hashing (MKH) method for arranging records into buckets and use the disk modulo (DM) allocation method for storing buckets onto disks. Since the DM allocation method has been shown to be superior to any other allocation methods for allocating an MKH file onto a two-disk system for answering ORQs, the real issue is knowing how to determine an optimal way for organizing the records into buckets based upon the MKH concept.

A performance formula that can be used to evaluate the average response time, over all possible ORQs, of an MKH file in a two-disk system using the DM allocation method is first presented. Based upon this formula, it is shown that our design problem is related to a notoriously difficult problem, namely the Prime Number Problem. Then a performance lower bound and an efficient algorithm for designing optimal MKH files in certain cases are presented. It is pointed out that in some cases the optimal MKH file for ORQs in a two-disk system using the DM allocation method is identical to the optimal MKH file for ORQs in a single-disk system and the optimal average response time in a two-disk system is slightly greater than one half of that in a single-disk system.     

An improved cryofixation method: cryoquenching of small tissue blocks during microwave irradiation

The metal contact method of rapid freezing is greatly improved by irradiating the specimen with microwaves at 2.45 GHz for a short period of time (50 ms), while pushing the specimen onto the surface of the copper block cooled by liquid N₂. The microwave irradiation, together with two technical improvements (a light-mass plunger and a recently developed β-gel shock absorber) for preventing bounce, produces a good freezing zone for squid retina, with high reproducibility for each experimental trial, extending from the contact surface to a depth of about 15 μm, which is comparable to the depth obtained by the metal contact method using liquid He in the absence of microwave irradiation. A good freezing zone was also experimentally demonstrated in specimens of rat liver and heart muscle. Microwave irradiation does not have appreciable effects on the ultrastructure of squid retina. The mechanism underlying the improvement in the rapid freezing under the microwave irradiation is discussed.     

Non-parametric empirical Bayes procedure

In this paper we introduce an empirical Bayes procedure for estimating an unknown parameter, say θ. This procedure gives the empirical Bayes estimator for θ and its associated minimum posterior risk in closed forms without estimating the unknown prior density function of θ. In such procedure the posterior probability density function of θ is not required. A sufficient statistic for θ with conditional probability density function in the one parameter exponential family is required. Instead of estimating the unknown prior density function, the marginal density function of the sufficient statistic must be estimated. As special cases the empirical Bayes estimators and their respective minimum posterior risks of the failure rate for the exponential distribution, the unknown scale parameters of Weibull and gamma distributions are obtained in simple forms as special cases. Numerical results and a simulation study are introduced to (i) investigate how the number of available past experiments and the sample size of each influence the accuracy of the empirical Bayes estimator, (ii) make a comparison between the presented procedure and the Bayes procedure when the prior probability density function of the parameter θ is gamma.     

基于改进PSO算法的结构损伤检测

结构的损伤检测常转化为求解约束优化问题,针对粒子群算法容易出现早熟问题,增大算法后期的粒子位置的改变量,从而增加粒子位置的差异,因而能够增强其在求解约束优化问题时抵抗局部极小的能力。两层刚架单损伤和多损伤识别的数值结果和收敛曲线表明了改进后的粒子群算法优于传统的带惯性因子的粒子群算法。三层框架结构的4种损伤工况的试验研究进一步说明了该算法应用于结构损伤检测领域的有效性。