Implementing Qubits with Superconducting Integrated Circuits

Superconducting qubits are solid state electrical circuits fabricated using techniques borrowed from conventional integrated circuits. They are based on the Josephson tunnel junction, the only non-dissipative, strongly non-linear circuit element available at low temperature. In contrast to microscopic entities such as spins or atoms, they tend to be well coupled to other circuits, which make them appealling from the point of view of readout and gate implementation. Very recently, new designs of superconducting qubits based on multi-junction circuits have solved the problem of isolation from unwanted extrinsic electromagnetic perturbations. We discuss in this review how qubit decoherence is affected by the intrinsic noise of the junction and what can be done to improve it. PACS: 03.67.-a, 03.65.Yz, 85.25.-j, 85.35.Gv     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

Effect of oxygen deficiency (δ) on transition temperature of yttrium cuprate superconductors

The nature of pairing mechanism as well as transition temperature of yttrium cuprates is discussed using the strong coupling theory. An interaction potential has been developed for the layered structure with two conducting CuO₂(a–b) layers in a unit cell. The interaction potential properly takes care of electron-electron, electron-phonon and electron-plasmon interactions. Furthermore, the electron-phonon coupling parameter (λ), the modified Coulomb repulsive parameter (μ*) and the 2D acoustic phonon (plasmon) energy as a function of oxygen deficiency is worked out. Finally, the superconducting transition temperature (T _c) is then evaluated by using these coupling parameters and obtainedT _c = 95(92)K for Y(Yb)Ba₂Cu₃O_7−δ superconductors withδ = 0·0. The model parameters estimated from the layered structure approach are consistent with the strong coupling theory. The result deduced on the variation ofT _c withδ are in fair agreement with the earlier reported data on yttrium cuprates. The analysis of the above results are discussed.     

Magnetization and rotation of MTG HTSC ring in magnetic field

The magnetization of a melt-texture growth (MTG) HTSC ring has been studied. It is shown that the magnetic field inside the ring is larger than the external field under a certain range of external magnetic fields. We have also investigated the magnetic field dependence of the response of a detective coil near a rotating superconducting ring. The responses of the MTG sample are different for different cooling methods.     

Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

HT-7U纵场磁体的真空压力浸渍

主要通过模拟匝间流动试验、短样试验和长样试验等 ,探求低温超导托卡马克HT 7U中纵场磁体线圈的绝缘层真空压力浸渍的工艺参数 ,确定工艺流程 ,并以模型线圈试验的电性能和液氦温度下的力学性能来验证工艺参数及工艺流程的可靠性。     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Superconductivity in nearly single-phase Bi-Pb-Sr-Ca-Cu-O samples with different nominal compositions

The preparation conditions, phase composition, and superconducting properties of Bi-Pb-Sr-Ca-Cu oxide materials from different nominal compositions have been investigated. Nearly single-phase samples from Bi₂Pb_0.4Sr₂Ca₃Cu₄O _y , as well as from the proposed compositions Bi_1.8Pb_0.4Sr₂Ca₃Cu₄O _y and Bi_1.8Pb_0.4Sr₂Ca_2.5Cu_3.5O _y were obtained by a solid-state reaction in air. Samples with the third nominal composition showed the best superconducting properties (T _on=111 K and zero resistance atT ₀=103 K). A possible mechanism for the 2223 phase formation in the three investigated compositions has been discussed.     

Superconductivity and Structure

The degree of the isolation of the CuO₂ planes (e.g. distance or bond valence to the apical coordination) has been shown by quantitative algorithms to be the major factor in determining aspects of the doping curves. They include the magnitude of the optimal number of doped holes (h_op) and the corresponding T _cop. It is shown that the roots of these phenomenological laws lie in a related structural dependence of super-exchange. The latter is expressed in the pseudo-gap or Neel temperature of the undoped parent compound. A fruitful language can be developed which deals with a buildup of complex quantum chemical features by bringing two holes into vicinity of a super-exchange O, forming a “local” Cu₂O₇ pair. Structural considerations also dictate that stress is relieved by alternate orthogonal pair orientation. This leads to plaid patterns with primary and secondary channels of charge. The presence of these two types of charge channels is involved in the mechanism of superconducting charge transport. Similar structuring of doped charge into plaid patterns of “local” pairs has been proposed for “all” high T _c superconductivity. STM now gives pictorial representation of the remnants of such an electronic crystal structure. The response of these bond-ordering motifs to structural details is further discussed. These ideas supply organization to the manifold experimental situation and provide opportunities for a unifying theory for high T _c superconductivity in terms of real space structuring of “local” pairs, largely on crystal-chemical principles.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.