Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

Induced slim ferroelectric hysteresis loops and enhanced energy-storage properties of Mn-doped (Pb0·93La0.07)(Zr0·82Ti0.18)O3 anti-ferroelectric thick films by aerosol deposition

In this study, the high ferroelectric hysteresis loss of (Pb_0·93La_0.07)(Zr_0·82Ti_0.18)O₃ (PLZT 7/82/18) antiferroelectric (AFE) ceramics was reduced by employing a combinatorial approach of Mn acceptor doping followed by thick film fabrication via an aerosol deposition (AD) process. The grains of the as-deposited PLZT 7/82/18 AFE AD thick films were grown by thermal annealing at 550 °C to enhance their electrical properties. Investigation of the electrical properties revealed that Mn-doping results in improved dielectric and ferroelectric properties, increased dielectric breakdown strength (DBS), and energy-storage properties. The Mn-doped PLZT AFE AD films possess a frequency-independent high dielectric constant (ε_r ≈ 660) with low dielectric loss (tan δ ≈ 0.0146), making them suitable candidates for storage capacitor applications. The bipolar and unipolar polarization vs. electric field (P-E) hysteresis loops of PLZT 7/82/18 AFE AD thick films were found to be slimmer than those of their bulk form (double hysteresis) with significantly reduced ferroelectric hysteresis loss, which is attributed to the AD-induced mixed grain structure. The Mn-doped PLZT 7/82/18 AFE AD thick films exhibited a low remnant polarization (P_r ≈ 9.22 μC/cm²) at a high applied electric field (~2750 kV/cm). The energy-storage density and energy efficiency of the Mn-doped PLZT AFE AD thick films were calculated from unipolar P-E hysteresis loops and found to be ~38.33 J/cm³ and ~74%, respectively.     

Mathematical Modeling of Drying Processes of Selected Fruits and Vegetables

This study investigates the behavior of fruit and vegetable samples during drying. The experimental data are fitted to several different thin-layer drying models. Regression analysis is used to determine model parameters, while statistical indicators serve to evaluate the goodness of fit. The power function model gives the best fit for all examined samples. Based on this model, different drying and heat storage technologies can be combined to ensure that the required residual moisture content of an agricultural product is reached. It is demonstrated on the case of a specific Togolese processing plant that under favorable conditions, fossil fuel consumption can be decreased by 33 %.     

Microwave-assisted synthesis of thermoelectric oxides and chalcogenides

The combination of microwaves with other classical synthetic methods may be considered as a powerful tool for the preparation of metal oxides and metal chalcogenides. This approach allows the modification of the reaction kinetic significantly by shortening the processing time to minutes and it minimizes the energy consumption during the synthesis. In this work, potential thermoelectric compounds, which enable the direct conversion of temperature gradients into useful electric energy, have been produced by means of microwave-chemistry routes. Pure phases of SnS_1-xSe_x (x = 0, 0.2, 1) have been synthesized in just 1 min by using microwave-hydrothermal synthesis. Moreover, Zn_0.98M_0.02O (M = Al, Ga) rods were formed by microwave-coprecipitation method in 5 min. Besides, 8 min of microwave-heating were enough for the combustion of Sr_1-xLa_xTiO_3-δ (x = 0, 0.05, 0.1). In all cases, the utilization of microwave radiation produces high-quality phases. A comprehensive study of the structural, microstructural and thermoelectric properties of the microwave-synthesized materials is here performed by means of X-ray diffraction, SEM, HRTEM and temperature dependence measurements of Seebeck coefficient, electrical conductivity and thermal conductivity.     

High energy-storage performance of lead-free AgNbO3 antiferroelectric ceramics fabricated via a facile approach

AgNbO₃ lead free AFE ceramics are considered as one of the promising alternatives to energy storage applications. In the majority of studies concerning the preparation of AgNbO₃ AFE ceramics, an oxygen atmosphere is required to achieve high performance, increasing the complexity of the fabrication process. Herein, a facile approach to preparing AgNbO₃ ceramics in the ambient air was reported, in which the AgNbO₃ ultrafine powder with stable perovskite structure was synthesized by hydrothermal method instead of the conventional ball milling process, leading to a lower temperature of phase formation and thus smaller grain size. The resulting ceramics sintered at 940 °C displayed high breakdown strength (216 kV/cm) and a recoverable energy density of 3.26 J/cm³ with efficiency of 53.5 %. Also, the high thermal stability of recoverable energy density (with minimal variation of ≤20 %) and efficiency (≤ 10 %) over 30–150℃, enables AgNbO₃ ceramics achieved to be a promising candidate for energy storage applications.     

Simultaneously achieving high energy-storage density and power density under low electric fields in NBT-based ceramics

Aiming at the problem that power density and energy density are difficult to obtain simultaneously under low field, a novel composition (1-x)Na_0·5Bi_0·5TiO₃-xBaZn_1/3Ta_2/3O₃((1-x)NBT-xBZT) was designed and fabricated via solid-state methods. With the addition of BZT, the crystal lattice, structural symmetry, grain size, and dense degree were all increased proved by XRD, Raman, and Archimedes drainage method et al. Because of the enhancement of relaxor behavior, the x=0.10 sample displayed a high permittivity ε_r of 2871±15% and a low dielectric loss tan δ ≤ 0.025 in the wide temperature range of 60–400 ^oC. This ceramic also showed maximum recoverable energy density W_d (2.07 J/cm³) with high efficiency η (71.5%) under a low field of 150 kV/cm. Moreover, pulse discharge testing proved that this ceramic possessed both a significant discharge energy density W_D (0.96 J/cm³) and a record high power density P_D (108.54 MW/cm³). This work provided a promising material for high power and energy applications.     

Enhancing upconversion of Nd3+ through Yb3+-mediated energy cycling towards temperature sensing

Photon upconversion of lanthanides has been a powerful means to convert low-energy photons into high-energy ones. However, in contrast to the mostly investigated lanthanide ions, it has remained a challenge for the efficient upconversion of Nd³⁺ due to the deleterious concentration quenching effect. Here we report an efficient strategy to enhance the upconversion of Nd³⁺ through the Yb³⁺-mediated energy cycling in a core-shell-shell nanostructure. Both Nd³⁺ and Yb³⁺ are confined in the interlayer, and the presence of Yb³⁺ in the Nd-sublattice provides a more matched energy for the upconversion transitions occurring at the intermediate state of Nd³⁺ towards much better population at its emissive levels. Moreover, this design also minimizes the possible cross-relaxation processes at both intermediate level and the emissive levels of Nd³⁺ which are the primary factors limiting the upconversion performance for the Nd³⁺-doped materials. Such energy cycling-enhanced upconversion shows promise in temperature sensing.     

Microstructure induced ultra-high energy storage density coupled with rapid discharge properties in lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3–SrNb2O6 ceramics

Novel lead-free (1-x)Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃-xSrNb₂O₆ ceramics were synthesized via a two-step high energy ball milling process. The evolution of microstructural properties, phase transformation, and energy storage characteristics was comprehensively investigated to assess the applicability of material in multi-layered ceramic capacitors. The substitution of SrNb₂O₆ (SNO) in Ba_0·9Ca_0·1Ti_0·9Zr_0·1O₃ (BTCZ) has resulted in substantial improvement in materials density along with a small increase in the grain size of the synthesized ceramic. A thorough microstructural investigation indicates an excellent dispersibility and compatibility between BTCZ and SNO phases. With an increase in SNO substitution, a transition from typical ferroelectric to relaxor ferroelectric has been observed, which has led to a significantly slimmer ferroelectric loop along with frequency dispersive dielectric properties. The optimized composition (i.e., x = 0.10) exhibits an ultra-high recoverable energy density of 2.68 J/cm³ along with a moderately high energy efficiency of 83.4%. Further, SNO substituted samples have also shown an enhancement in breakdown strength. The improvement in energy storage performance and breakdown strength of SNO substituted BTCZ composites are mainly attributed to relatively homogeneous grain morphology, optimum grain size, microstructural density, and improved grain boundary interface.     

(1-x)Bi0.5Na0.47Li0.03TiO3-xNaNbO3 lead-free ceramics with superior energy storage performances and good temperature stability

Dielectric capacitors show great potential in superior energy storage devices. However, the energy density of these capacitors is still inadequate to meet the requirement of energy storage applications. In this study, the Bi_0.5Na_0.47Li_0.03TiO₃-xNaNbO₃ (BNLT-xNN) ceramics were prepared via conventional solid-phase reaction. Results showed that NN can efficaciously enhance the breakdown strength (E_b) and the relaxation behavior of the BNLT ceramic because of the broken ferroelectric long-range order. When x = 0.3, the maximum E_b reached 350 kV/cm, at which the 0.7BNLT-0.3NN ceramic exhibited the high recoverable energy storage density (W_rec) of 4.83 J/cm³ and great efficiency (η) of 78.9%. The ceramic demonstrated good temperature stability at 20 °C-160 °C and excellent fatigue resistance. Additionally, the 0.7BNLT-0.3NN ceramic presented high power density (P_D; ～77.58 MW/cm³), large current density (C_D; ～861.99 A/cm²), and quite short discharge time (t_0.9; ～0.090 μs). These results indicated that the 0.7BNLT-0.3NN material has excellent energy storage properties and various application prospects.     

Improved energy storage density and energy efficiency of Samarium modified PMNT electroceramic

We report the improved energy storage density and efficiency after 2.5% of Samarium substitution in ferroelectric Pb[(Mg_1/3Nb_2/3)_0.80Ti_0.20]O₃ (PMNT) electroceramic. The microstructure and surface morphology were analyzed and correlated with various functional properties. The energy storage density, leakage current density, ferroelectric and dielectric properties were investigated thoroughly, indicating that Samarium's substitution significantly modified the microstructure, the dielectric strength, breakdown electric field, and turned ferroelectric PMNT to relaxor ferroelectrics. Due to the relaxor nature, the gap between remanent polarization and maximum polarization increases with the substitution of Samarium in PMNT matrix, which further increases the recoverable energy storage density and energy efficiency. A nearly 100% increase in recoverable energy density and efficiency was obtained at an electric field strength of 35 kV/cm at room temperature (～296 K). The electroceramic shows maximum energy density near the ferroelectric phase transition temperature (325 K–345 K) region and provides a moderate energy storage density for possible applications in power microelectronics.