基于区块链智能合约的应用研究综述

通过概述区块链智能合约的运作原理及应用研究现状,对现存项目和存在的问题进行分析总结.首先,基于区块链智能合约整体架构介绍合约模型及运行原理,以Ethereum、Hyperledger Fabric和EOSIO三大区块链平台为例分析智能合约部署原理并对三大平台进行对比分析.针对国内外区块链智能合约的应用研究进行归纳总结,并讨论区块链智能合约未来创新应用和发展趋势.从金融交易、物联网和医疗应用三大应用研究领域介绍了基于Ethereum和Hyperledger Fabric平台的区块链智能合约应用现状,进一步探讨了基于EOS(enter-prise operation system)的应用研究和其他应用领域研究现状.最后,从隐私、机制设计与安全、性能和形式化验证等智能合约自身存在问题及三大平台应用存在的不足对区块链智能合约的未来研究方向进行分析和展望.     

The relation between compressive strength of carbon/epoxy fabrics and micro-tow geometry with various bias angles

In this paper compressive tests of carbon/epoxy (plain weave, 3k) fabric composites were performed to investigate the relation between compressive strength and various bias angles and shear angles. Compressive properties such as chord modulus and maximum strength of the fabric composite materials are essential to analyze the drape behaviour and estimate the quality of the final products. Various specimens with different bias and shear angles which were fabricated by using autoclave de-gassing moulding process were prepared to estimate the strength and chord modulus with respect to the bias and shear angle variations. The stacking sequences of the compressive test specimens are [0]_10T, [15]_10T, [30]_10T and [45]_10T for bias specimens and [±37]_10T, [±32]_10T, [±28]_10T, [±22]_10T for sheared specimens. Micro-tow structures were observed to correlate the fabric compressive strength with crimp angle. Anti-buckling rig was involved to prevent specimens from buckling during the compressive tests. The compressive test was performed with 1.3 mm/min strain rates. Compressive test results were compared with calculation results. Facture modes which were classified in two different modes were analyzed using microscopic observation.     

A new skeletal model for fabric drapes

Fabric drapes are typical large displacement, large rotation and small strain problems. Compared with continuum shell finite element methods, methods that skeletonize the fabric sheet into a set of interconnected nodes appear to be more popular in drape problems with extensive wrinkles. These skeletal methods may resort to particle mechanics and formulate the elastic energy or the equations of motion in terms of the node-to-node distance and the angles between the straight lines joining adjacent nodes. Alternatively, beam elements can be employed to skeletonize the fabric sheet at the expense of using rotational in addition to translational nodal DOFs. In this paper, a new skeletal model based on the small strain and curvature assumptions is devised. In contrast to most, if not all, skeletal models for fabric drape simulation, all the stretching, shearing and bending energies in the model are simple polynomials of the grid-point␣displacement. Fabric drape problems with extensive wrinkles are examined. The presence of sharp fold, seam and cut in the undeformed fabric sheet as well as fabric-to-solid contact are considered. The predicted appearances are pleasant and conform to real life observations.     

针织物节能减排漂染工艺探讨

将新开发的高效前处理、染色助剂应用于针织物实用高效漂染工艺,探讨其应用工艺、产品质量及节能减排效果。分析各类前处理碱氧一浴工艺的特点、应用特性及节能减排效果;阐述涤棉针织物练染一浴工艺,免还原清洗工艺,棉针织物活性染色与抛光一浴工艺及活性染色后皂洗酶后处理工艺。并与相应的传统工艺对比其工艺曲线、质量水平、节能减排效果及污染物浓度降低情况。客观评价各类工艺的优缺点,建议生产厂家根据产品质量要求,选用相应高效助剂,并结合实际生产设备优化工艺后使用,节能减排效果将更加显著。     

Effect of the particle size ratio on macro- and mesoscopic shear characteristics of the geogrid-reinforced rubber and sand mixture interface

As a new type of material for civil engineering projects, the rubber and sand mixture is widely used in roadbed fillers, offering environmental benefits over traditional tyre disposal methods. This study uses a large-scale direct shear apparatus to examine the interface shear properties of the geogrid-reinforced rubber and sand mixture, considering different particle size ratios (r), rubber contents, and normal stresses. Based on indoor tests, direct shear models of the mixture with different values of r are established in PFC^3D, revealing the meso-mechanical mechanism of the mixture in the direct shear process. The results show that when r is greater than 1, incorporating a certain amount of rubber particles can increase the shear strength of the mixture. The r values of 15.78, 7.63, and 3.98 correspond to an optimal rubber content of 30%, 10%, and 20%, respectively. When r is less than 1, mixing rubber particles can only reduce the shear strength of the mixture. When the rubber content is low, the smaller the value of r, the greater is the thickness of the shear band. Furthermore, the normal and tangential contact forces are greater. The fabric anisotropy evolution law of the mixture is consistent with the change in the contact force distribution.     

Polypyrrole-coated cotton fabrics prepared by electrochemical polymerization as textile counter electrode for dye-sensitized solar cells

Textile-based wearable electronics provides the combined advantages of both electronics and textiles, such as flexibility, stretchability and lightweight. Much effort has been dedicated to achieve flexible photovoltaic power for wearable electronics. Here, we have demonstrated polypyrrole (PPy) coated cotton fabrics as textile counter electrode (CE) in dye-sensitized solar cells (DSSCs). PPy is deposited on the Ni-coated cotton fabrics as catalytic material by electrochemical polymerization of pyrrole. The highly conductive PPy-coated fabric electrode with a surface resistance of 5.0 Ω sq⁻¹ shows reasonable catalytic activity for the reduction of triiodide ion. The DSSC fabricated with the PPy-coated fabric CE exhibits a power conversion efficiency as high as ∼3.83% under AM 1.5 illumination.     

About the creep-fatigue interaction on the fatigue behaviour of off-axis woven-ply thermoplastic laminates at temperatures higher than Tg

The influence of plasticity and viscous effects on the fatigue behaviour of off-axis C/PPS laminates was investigated at temperatures higher than glass transition temperature. The obtained results clearly show that creep and fatigue are mutually influencing phenomena. Compared to the reference fatigue behaviour (with no prior loading), the fatigue life can be significantly extended with prior creep depending on loading conditions. Indeed, the strain accumulation seems to slow down after a long time creep preload, as if the time-dependent mechanisms were “evacuated” during this preload. The same conclusion can be drawn for the damage accumulation when the prior creep stresses are higher than the damage threshold or when the hold time is long enough, inducing significant plastic deformations. In angle-ply laminates, such deformations are associated with the reorientation of fibres. They contribute to the reduction of stress intensities, which results in increasing both fatigue life and maximum strain ɛ_max at failure during fatigue loadings.     

Objective evaluation of multidirectional fabric wrinkling using image analysis

In the textile industry, the wrinkled fabrics are regularly evaluated subjectively in reference to a set of visual standards. However, due to the disadvantages of visual evaluation, which are unreliable and time-inefficient, several objective methods were recently developed. In this paper, a new objective evaluation of multidirectional realistic fabric's wrinkling generated by the French method of “cylindre creux” was proposed using the image processing. Four characteristics of wrinkled fabrics were evaluated to estimate wrinkle grade with a statistical model. The study reveals a good correlation between the objective wrinkling evaluation (using image analysis) and the subjective evaluation (using the visual standards).     

温敏形状记忆织物的开发及其起拱回复性研究

探讨棉温敏形状记忆聚氨酯包芯纱织物的加工方法及其起拱回复性能。通过分析形状记忆聚氨酯纤维的性能及其作用原理,设计了棉温敏形状记忆聚氨酯包芯纱织物,并将其与纯棉织物和棉氨纶包芯纱织物进行了起拱回复性能的对比试验。试验结果表明,温敏形状记忆聚氨酯包芯纱织物经过热处理后,热回复率高于其他织物,具有良好的形状记忆功能。     

真丝双绉绉效应与几何结构的相关研究

真丝双绉绉效应与织物的表面几何结构密切相关,与截面几何结构关系不大。绉效应系数,被定义为表面几何结构参数,即纬线的波高、纬密和纬线单位长度中的半波数的乘积。研究结果表明,它与绉效应呈单调递增函数关系,可作为绉效应的数量评定指标。