Stereoselective Lewis Base‐Catalyzed Asymmetric Hydrosilylation of α‐Acetamido‐β‐enamino Esters: Straightforward Approach for the Construction of α,β‐Diamino Acid Derivatives

The Lewis base‐organocatalyzed asymmetric hydrosilylation of α‐acetamido‐β‐enamino esters was investigated. Among various chiral Lewis base catalysts, a novel catalyst derived from L ‐serine was found to be the most efficient one which can promote the reaction to afford a series of α,β‐diamino acid derivatives with high yields (up to 99%), excellent enantioselectivities (up to 98% ee) and moderate diastereoselectivities (up to 80:20 dr). The absolute configuration of one of the products was determined by the X‐ray crystallographic analysis. In addition, the mechanism and the transition state of the reaction were proposed.     

环己基甲基二氯硅烷的合成工艺

在一定的压力下,以甲基二氯硅烷(DCMS)和环己烯为原料、以硅氧烷铂配合物为催化剂,以苯甲醛为促进剂,进行了用氢硅烷化法合成环己基甲基二氯硅烷(CMCS)的工艺研究。考察了原料配比、反应温度、反应压力、催化剂用量、促进剂种类、反应时间等因素对CMCS收率的影响。得到合成CMCS的最佳工艺条件为:反应压力0.7-0.8MPa,n(环己烯):n(DCMS)=1.00:1.12,反应温度85-90℃,1mol环己烯用催化剂1.0mL,苯甲醛2.0mL,反应时间5-6h,CMCS收率89.6%,w(CMCS)=99.54%。用1HNMR、IR、MS对CMCS的结构进行了表征。     

十二烷基三甲氧基硅烷的合成

以三氯氢硅、1-十二碳烯为原料,在铂催化剂存在下合成出十二烷基三氯硅烷;并以溶剂法醇解得到十二烷基三甲氧基硅烷。考察了催化剂用量、原料配比、反应时间对加成反应的影响,溶剂、原料配比、温度等因素对醇解反应的影响。最佳反应条件为:在加成反应中,当铂催化剂与三氯氢硅的量之比为3.6×10-4∶1、三氯氢硅与1-十二碳烯的量之比为1.15∶1时,十二烷基三氯硅烷的收率达81%,反应在室温下无诱导期即可发生、且无需改变加料方式、反应时间短、副反应少、收率高;醇解反应采用溶剂法,将十二烷基三氯硅烷滴加到甲醇中,十二烷基三氯硅烷与甲醇的量之比为1∶3.2,底温控制在70℃,N2流量为80 mL/min,十二烷基三氯硅烷的滴加速度为1 mL/min,十二烷基三甲氧基硅烷的收率为85%。     

加成法合成3,3,3-三氟丙基甲基二甲氧基硅烷

以甲基二氯硅烷和甲醇为原料,采用气-液相反应法合成出甲基二甲氧基硅烷;然后,将甲基二甲氧基硅烷与3,3,3-三氟丙烯在铂催化剂作用下进行硅氢加成反应,得到3,3,3-三氟丙基甲基二甲氧基硅烷。考察了原料配比、填料种类等因素对醇解反应的影响以及铂催化剂的种类、用量、反应温度等对加成反应的影响。结果表明,最优合成条件为:在醇解反应中,甲基二氯硅烷与甲醇的量之比为1∶1·8、醇解温度50℃、甲醇滴加速度2mL/min、N2流量80mL/min,在此条件下,甲基二甲氧基硅烷的收率为86%;在加成反应中,采用自制的铂催化剂,当铂催化剂与甲基二甲氧基硅烷的量之比为3·0×10-4∶1、反应温度为120℃时,3,3,3-三氟丙基甲基二甲氧基硅烷的收率达90%。此法可有效提高3,3,3-三氟丙基甲基二甲氧基硅烷的收率。     

聚苯乙烯-铂络合物催化硅氢加成反应机理的研究

将巯甲基化交联聚苯乙烯－铂络合物微球用于催化苯乙烯与甲基二氯硅烷的加成反应，考察了用硅氢加成试剂处理催化剂的时间对其催化行为的影响。发现催化活性中心主要是Pt（Ⅱ），催化剂的后处理时间明显影响硅氢加成反应的诱导期和活性，并根据实验结果提出了可能的催化机理。     

以四烯丙基(二甲基)硅烷为核的超支化聚硅碳烷的合成与表征

以四烯丙基(二甲基)硅烷(B4)为核、甲基氢二烯丙基硅烷(AB2)为单体,通过硅氢加成反应,采用无核一步法、核一步法、核多步法合成了超支化聚有机硅碳烷。用FT-IR1、H-NMR、MALLS-GPC对该聚合物的结构进行了表征。研究了核多步法对超支化聚合物分子量及其分布的控制,结果表明,用核多步法合成超支化聚有机硅碳烷可有效地控制产物的分子量及其分布。     

Preparation of polysiloxane with pendant Cr‐bound carbazole chromophore for nonlinear optics

A novel η⁶‐complex of N‐allylcarbazole containing chromium tricarbonyl was synthesized. This complex was hydrosilylated with polymethylhydrosiloxane to afford a substituted polymer. Both the complex and the polymer were characterized by classical spectroscopy techniques (FTIR, NMR, and UV–vis), gel permeation chromatography, elemental analysis, and thermal analysis (TGA and DSC). The glass transition temperature of the polymer was found to be above 100°C and its thermal decomposition temperature was above 280°C. The polymer was amorphous in nature and formed excellent homogeneous films of good optical transparency. The third nonlinear optical properties of this polymer film coated on quartz substrate were studied by time‐resolved forward degenerate four‐wave mixing (DFWM). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and structural characterization of methacrylic acid/octadecyl acrylate‐graft‐poly(methylhydrosiloxane) by hydrosilylation

Methylmethacrylate (MMA) and octadecyl acrylate (OA) were grafted to poly(methylhydrosiloxane) (PMHS) by hydrosilylation, respectively, with hexachloroplatinic acid as catalyst, and the former was further hydrolyzed to prepare methacrylic acid (MAA)‐graft‐PMHS under the alkaline condition. Through orthogonal experiment, main factors affecting the graft reaction between OA and PMHS were discussed and arranged in a decreasing order according to their abilities of the effect on the hydrosilylation of OA with PMHS: catalyst dosage, reaction temperature, reaction time, material ratio, and solvent dosage. It was found that the hydrosilylation of OA with PMHS was easier to that of MMA with PMHS. Under optimal conditions, the grafting ratios of MMA with PMHS and OA with PMHS reached about 90 and 95%, respectively. FTIR and ¹H NMR spectra indicated that the hydrosilylation reactions followed the Markovnikov's rule and played a strong preference toward β‐1,2‐addition. The test of contact angle indicated that surface energy of a system was mainly dependent on the polar groups. The surface energy of OA‐graft‐PMHS (35.07 mN/m) was similar to those of PMHS (35.62 mN/m) and polyoctadecyl acrylate (36.57 mN/m), and lower than that of MAA‐graft‐PMHS (43.50 mN/m). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

不饱和烃硅氢加成催化剂固载化研究进展

综述了各类负载过渡金属的催化剂体系及其在不饱和烃硅氢加成反应中的应用。负载过渡金属的催化剂具有良好的可回收性和选择性，研究主要集中在开发价廉、使用安全、环境友好和高催化性能的活性炭、氧化物或有机聚合物等负载过渡金属催化剂，并取得很好的结果。     

Preparation and Property of Acrylic Acid Rare Earth Complex and Its Hydrosilylation

Acrylic acid rare earth complex was prepared. Its chemical composition was determined by chemical and elemental analysis, and its structure as well as properties was characterized using IR, Fluorescence and UV spectrum, and its solubility was also investigated. Meanwhile a kind of elastic functional polymer with rare earth units in the side chains was produced. It is confirmed by IR spectrum that the Si-H bonds really react with acrylic acid rare earth.