航天轴承新贵:60NiTi合金

在NiTi系合金大家族中,等原子比的NiTi合金具有形状记忆效应和超弹性。相比于等原子比NiTi合金,60NiTi合金不会发生热弹性马氏体相变,不具有形状记忆效应和超弹性,但是它在硬度、耐腐蚀性和弹性性能等方面具有出众的潜能,在航天领域上展现了良好的应用前景。固溶态60NiTi合金同时具备结构稳定性、超强的耐腐蚀性、出色的耐磨性,已成为航天轴承候选新材料。     

3DPanoGo2维全景采集子系统研究

3DPanoGo2三维全景采集子系统是通过将微型的全景相机、存储介质、以及各种传感器,包括时间和空间传感器、姿态传感器、GPS设备等、在移动的状态下,采集全景三维数据、GPS轨迹信息等。获得的数据成果包括各种姿态数据、三维全景数据、轨迹图层等等。新颖性及优势本产品将当前火热的街景影像延伸到室内三维全景,同时无缝融合室内导航技术,将三维全景与定位结合起来,即能提高定位的精确性,又能提升导航的互动性、可视性。     

劲性钢柱间钢筋剥肋滚轧直螺纹连接技术

介绍可焊套筒连接技术及CABR/M套筒连接技术的工艺原理和特点,阐述了可焊套筒连接技术及CABR/M套筒连接技术在劲性钢柱间的钢筋连接施工流程及检验要求。     

A nanoparticle formation model considering layered motion based on an electrical explosion experiment with AI wires

To study the evolution of nanoparticles during Al wire electrical explosion,a nanoparticle formation model that considered layered motion was developed,and an experimental system was set up to carry out electrical explosion experiments using 0.1 mm and 0.2 mm Al wires.The characteristic parameters and evolution process during the formation of nanoparticles were calculated and analyzed.The results show that the maximum velocities of the innermost and outermost layers are about 1200 m·s^-1     

日本潜艇型号小史

二次世界大战时期日本曾拥有与西方同期水平相当的潜艇研制和生产能力。其仅在战争期间建造的潜艇就多达114艘。侵略战争失败后,残存的潜艇或被战胜国瓜分,或被拆毁。即使是1948年日本成立海上保安队（即海上自卫队前身）之后的相当长一个时期,由于其国民经济尚未从濒干完全崩溃的状态下恢复,加之战后初期受制干1945年签署的和平条约,     

BAMPM基高可溶高透光聚酰亚胺的制备及表征

将3,3',5,5'-四甲基-4,4'-二胺基苯基-4'-甲基甲苯(BAMPM)与均苯四甲酸二酐(PMDA)、联苯四甲酸二酐(BPDA)、联苯醚二酐(ODPA)、六氟二酐(6FDA)通过一步高温缩聚法制备了四种新型聚酰亚胺(PI)。所得聚酰亚胺在普通有机溶剂中具有优异的溶解性。聚酰亚胺的玻璃化转变温度(Tg)超过332℃,10%热失重温度为530～537℃。溶液浇铸法制备的聚酰亚胺薄膜具有高光学透明性,UV截止波长为312～366 nm,80%透过率波长为382～436 nm。该薄膜的拉伸强度为60.5～84.7 MPa,弹性模量为1.7～2.4 GPa,断裂伸长率为5.9%～10.2%。     

好教 好学 好用——《新世界大学英语视听说教程》的编写理念

《新世界大学英语视听说教程》以《大学英语课程教学要求》(2007)为编写依据,借鉴国内外外语教学理论和教学实践最新研究成果,充分发挥外版教材的优点,突出"好教、好学、好用"的编写理念,在合理继承的基础上大胆创新,实现了本土化和国际化相结合的编写目标,代表了新一代大学英语视听说教材的发展趋势。     

江苏省地震前方指挥车应急数据信息通信方式的实现

前方指挥车是在有地震灾害事件发生时,能够立即响应,并快速到达地震震中所在地,立即开展现场信息汇集与共享、地震灾情动态评估和修正、辅助决策建议及时生成、现场资源调度和管理,实现前方指挥部与现场工作人员、国家指挥部、区域指挥部的不同应用系统之间的数据信息的共享和传递.本文主要介绍前方指挥车两种不同应急通信方式,并讨论各自的优缺点.     

Effect of shock wave formation on propellant ignition in capillary discharge

In order to study the effect of shock wave formation on propellant ignition in capillary discharge, the shock wave formation process was analyzed using experimental and theoretical methods; the plasma jet temperature was measured, and closed bomb and 30 mm gun experiments were carried out. The results show that the first shock wave has a smaller value and larger range of influence, while the second shock wave has a larger value and smaller range of influence. A plasma jet can generate a shock wave at the nozzle according to the calculated plasma pressure and velocity, which is well confirmed by experiments and calculations. The plasma jet temperature is high during the formation of a shock wave and then decreases sharply. Plasma ignition can increase the burning rate of a propellant by about 30% by increasing the burning surface area of the propellant. Compared to conventional ignition, the average maximum chamber pressure and average muzzle velocity of plasma ignition are increased by 9.1 MPa and 29.3 m·s−1(∼3%), respectively, in a 30 mm gun. Plasma ignition has strong ignition ability and short ignition delay time due to the generation of a shock wave. By increasing the burning rate of the propellant, the muzzle velocity can be greatly improved when the maximum chamber pressure increases a little. The characteristics of the shock wave can be applied in the application of the capillary discharge plasma. For example, it can be applied in fusion, launching and combustion.     

小功率无线能量传输系统电容补偿方案研究

针对电磁感应式无线能量传输系统初级和次级补偿问题,列出了四种补偿方案,推导了补偿电容的选择过程,通过系统仿真,对四种补偿方案的补偿效果进行了分析与比较。结果表明：初级并联一次级并联补偿在低电感情况下补偿效果较好,初级串联一次级串联补偿和初级串联一次级并联补偿在高电感的情况下补偿效果较好。