Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Fire hazard in transportation infrastructure: Review,assessment, and mitigation strategies

This paper reviews the fire problem in critical transportation infrastructures such as bridges and tunnels. The magnitude of the fire problem is illustrated, and the recent increase in fire problems in bridges and tunnels is highlighted. Recent research undertaken to address fire problems in transportation structures is reviewed, as well as critical factors governing the performance of those structures. Furthermore, key strategies recommended for mitigating fire hazards in bridges and tunnels are presented, and their applicability to practical situations is demonstrated through a practical case study. Furthermore, research needs and emerging trends for enhancing the “state-of-the-art” in this area are discussed.     

移动机器人助力生活用纸行业技术领先生产商

如今,成功的生产有赖于良好的管理和安全的工作场所。移动机器人可帮助企业实现这些目标,也是主动规划工厂原料和安排运输的一个关键技术部件。移动机器人的革新已经渗透到经销和物流环节,并将最终直接影响每个人,包括到消费者家门口的最后一英里交付。在当今这个产品上市速度和动态生产流程至为关键的世界。     

Removal of lead(Pb(Ⅱ))and zinc(Zn(Ⅱ))from aqueous solution using coal fly ash(CFA)as a dual-sites adsorbent

Coal fly ash(CFA)is composed of minerals containing some oxides in crystalline phase(i.e.,quartz and mullite),as well as unburned carbon as mesoporous material,thus enabling CFA to act as a dual-sites adsorbent with unique properties.This work focused on the adsorption of Pb(Ⅱ)and Zn(Ⅱ)from binary system,a mixture containing two metal ion solutions present simultaneously,onto NaOH-modified CFA(MCFA).Several adsorption tests were conducted to evaluate the effect of several parameters,includ-ing pH and contact times.The experiment results indicated that chemical treatment of CFA with NaOH increased pore volume from 0.021 to 0.223 cm3 g-1.In addition,it could also enhance the availability of functional groups on both minerals and unburned carbon,resulting in almost 100％Pb(Ⅱ)and 97％Zn(Ⅱ)adsorbed.The optimum pH for adsorption system was pH=3 and quasi-equilibrium occurred in 240 minutes.Equilibrium data from the experimental results were analyzed using Modified Extended Langmuir(MEL)and Competitive Adsorption Langmuir-Langmuir(CALL)isotherm models.The analysis results showed that the CALL isotherm model could better describe the Pb(Ⅱ)and Zn(Ⅱ)adsorption pro-cess onto MCFA in binary system compared with MEL isotherm model.     

Study of spatial and temporal evolution of Ar and F atoms in SF6/Ar microsecond pulsed discharge by optical emission spectroscopy

The study of sulfur hexafluoride (SF₆) discharge is vital for its application in gas-insulated equipment. Direct current partial discharge (PD) may cause SF₆ decomposition, and the decomposed products of SF₆, such as F atoms, play a dominant role in the breakdown of insulation systems. In this study, the PD caused by metal protrusion defects is simulated by a needle-plate electrode using pulsed high voltage in SF₆/Ar mixtures. The spatial and temporal characteristics of SF6/Ar plasma are analyzed by measuring the emission spectra of F and Ar atoms, which are important for understanding the characteristics of PD. The spatial resolved results show that both F and Ar atom spectral intensities increase first from the plate anode to the needle and then decrease under the conditions of a background pressure of 400 Pa, peak voltage of −1000 V, frequency of 2 kHz, pulse width of 60 μs, and electrode gap of 5–9 mm. However, the distribution characteristics of F and Ar are significantly different. The temporal distribution results show that the spectral intensity of Ar decreases first and then increases slowly, while the spectral intensity of F increases slowly for the duration of the pulsed discharge at the electrode gap of 5 mm and the pulse width of 40–80 μs.     

Measurement and analysis of the extreme ultraviolet emission band of laser-produced antimony plasmas

The temporal evolution of extreme ultraviolet (EUV) emission spectra of laser-produced antimony (Sb) plasmas has been measured in the 7–16 nm wavelength region using spatio- temporally resolved lase-produced plasma spectroscopy technique. The spectral profiles involve an intense quasi-continuous band with superimposed intense characteristic radiation and are different with the increase of delay time. The spectral structures were also analyzed according to Hartree–Fock calculations with configuration interaction effects and contributed from 4d–4f, 4d–4p, and 4d–5f unresolved transition arrays of Sb⁷⁺ – Sb¹³⁺. A steady-state collisional- radiative model was used to estimate the electron temperature and density range of Sb plasmas. This work would enrich the spectral data of highly-charged ions and provided a possible selection for developing EUV light sources.     

Translation speed measurements of hydrogen,helium, and argon field-reversed configurations in the central cell of a KMAX mirror device

A series of experimental results of field-reversed configurations (FRCs) on a KMAX (Keda Mirror with AXisymmetricity) tandem mirror machine are reported. Single-side FRC translation processes with three different gas species were measured by avalanche photodiodes. Consistent with the theoretical prediction, the measured FRC speeds were inversely proportional to the square root of the ion mass. However, the speeds of the hydrogen FRC increased even in a uniform magnetic field region while the speeds of the helium and argon FRCs decreased. Possible mechanisms are discussed. The speed of the second pass due to the reflection of the mirror fields was found to be ∼1/3 of the first pass speed. The internal magnetic fields were measured for a colliding-merging argon FRC, and the results show that, even for very slowmoving FRCs, merging can occur.     

Electric characteristic and cavitation bubble dynamics using underwater pulsed discharge

Underwater pulsed discharge is widely applied in medicine, machining, and material modification. The induced cavitation bubble and subsequent cavitation collapse are considered the major motivations behind these applications. This paper presents an underwater pulsed discharge system. The experimental setup is established to induce and investigate the cavitation bubble assisted with a high-speed camera. Three aspects, including the characteristic of the discharge with different applied voltages and conductivities, the evolution of the cavitation bubble profile, and the energy efficiency of cavitation bubble inducing, are investigated, respectively. Especially, the mechanism of pre-discharge time delay in the low field intensity case is explained using the Joule heat effect. The results show the validity of the underwater pulsed discharger and experimental setup. The present underwater pulsed discharger is proved to be a simple, portable, and easy-to-implement device for the investigation of cavitation bubble dynamics.     

低温氮、磁化综合处理钻头使用性能提高的X射线和电子显微技术分析研究

在地质钻探和石油钻井中,钻头都是非常重要的钻进工具。其技术特性,特别是硬度和耐磨性与钻探的技术经济指标,即与机械钻速、钻头进尺和每米钻探成本直接相关。为了提高钻头的工作性能,俄罗斯南方国立技术大学提出了综合低温淬火、磁化回火处理钻头的方法。经过综合处理后,钻头体、复合片底座和钎焊层的硬度分别提高了30%、3%和22%。野外钻进试验结果表明,经过低温液态氮和磁化综合处理的与未经综合处理的钻头相比,每次试验钻头进尺都有提高,总体上钻头进尺提高了22.2%,取得了很好的钻进效果。并对取得的效果进行了X射线和显微技术分析。     

香港大馆

<正>位于香港商业中心的"大馆",其前身是中央警署、中央裁判法院及域多利监狱,一座由各种历史建筑组成并被围墙围起的古建筑群,而如今是香港现存最重要的历史遗址之一。在2006年停止使用并清空后,这里只留下一块空地以及一系列独特的建筑,其中院落由阅兵场及监狱两大部分组成。设计团队的目标是保持二者的开放性及独立性的同时赋予它们新的活