高落差粉尘扩散规律和分布特征

高溜井放矿过程中会形成强大的冲击气流引起粉尘扩散，造成严重的井下环境污染，对其进行有效治理一直是井下通风除尘的工作重心，本工作利用相似实验和数值模拟相结合的方式探究溜井放矿过程中粉尘的扩散规律和分布特征。通过改变放矿质量、矿石粒径、溜井密闭程度、含水率等因素测试不同条件下气流大小和粉尘浓度分布，并利用CFD-DPM耦合方法模拟卸矿过程中的气?固两相流，研究气流和粉尘浓度时空分布特征。结果表明，最大粉尘浓度和风速随放矿质量增加而上升，随颗粒粒径和溜井密闭程度增大而降低，且含水率越大，粉尘浓度越小，风速无明显变化，在放矿过程中矿石颗粒之间碰撞占主导作用，颗粒流呈横向分布。     

Spin‐Gapless Semiconductors

The spin‐gapless semiconductors (SGSs) are a new class of zero‐gap materials which have fully spin polarized electrons and holes. They bridge the zero‐gap materials and the half‐metals. The band structures of the SGSs can have two types of energy dispersion: Dirac linear dispersion and parabolic dispersion. The Dirac‐type SGSs exhibit fully spin polarized Dirac cones, and offer a platform for massless and fully spin polarized spintronics as well as dissipationless edge states via the quantum anomalous Hall effect. With fascinating spin and charge states, they hold great potential for spintronics. There have been tremendous efforts worldwide to find suitable candidates for SGSs. In particular, there is an increasing interest in searching for Dirac type SGSs. In the past decade, a large number of Dirac or parabolic type SGSs have been predicted by density functional theory, and some parabolic SGSs have been experimentally demonstrated. The SGSs hold great potential for spintronics, electronics, and optoelectronics with high speed and low‐energy consumption. Here, both the Dirac and the parabolic types of SGSs in different material systems are reviewed and the concepts of the SGS, novel spin and charge states, and the potential applications of SGSs in next‐generation spintronic devices are outlined.     

变厚度板中水平剪切波的传播特性分析

为研究超声导波在储罐壁板等变壁厚结构中的传播特性，建立了SH波在空间自由边界中的传播模型，基于各向同性弹性介质Navier-Stokes方程，推导了变厚度板中SH波的频散方程，分析了变厚度板中水平剪切波走时t与倾斜角θ间的相互作用关系；通过简谐点源的远场响应并引入板厚与传播位移的非线性关系，得出了变厚度板中SH波的远场响应方程。在此基础上，仿真分析和实验验证了水平剪切波在不同倾斜角变厚度板中的传播特性，结果表明：在变厚度板的薄端激励水平剪切波并沿结构表面传播时，无频散现象，且无波包分离现象；但随着变厚度板倾斜角θ增大，水平剪切波的走时和接收信号幅值均逐渐递减，且呈非线性关系。     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

亲水作用色谱-串联质谱法测定动物源运动食品中3种氨基糖苷类抗生素的残留量

该研究建立了一种亲水交互作用色谱-串联质谱（HILIC-MS/MS）法测定动物源运动食品中潮霉素B、新霉素、安普霉素3种氨基糖苷类抗生素残留量的方法。结果表明，样品经Sielc Obelisc R柱分离，采用0.1%甲酸水溶液-乙腈梯度洗脱，可以实现3种目标物组分的分离。在此条件下，3种氨基糖苷类抗生素在5～500 ng/mL的质量浓度范围内线性关系良好，相关系数R2为0.999 5～0.999 9，检出限均为15 μg/kg，定量限均为50 μg/kg，保留时间的日间和日内相对标准偏差（RSD）分别为3.5%～7.9%和3.5%～4.1%，峰面积的日间和日内RSD分别为3.6%～7.4%和3.2%～3.9%，加标回收率为85.7%～93.6%，回收率试验结果的RSD为3.1%～5.2%。该方法可以满足动物源运动食品中3种氨基糖苷类抗生素的检测需求。     

Enhanced performance of Ni catalysts supported on ZrO2 nanosheets for CO2 methanation: Effects of support morphology and chelating ligands

A series of Ni/ZrO₂ catalysts was prepared by the impregnation method with modification of the morphology of ZrO₂ support as well as the impregnation procedure and tested for CO₂ methanation. The catalysts supported on the ZrO₂ nanosheets displayed superior catalytic performance as compared with that on ZrO₂ nanoparticles, which could be mainly attributed to the abundant oxygen vacancies promoting the adsorption and dissociation of CO₂ molecules as well as the high dispersion of Ni species. With the introduction of ethylenediamine (En) in the impregnation procedure, the resulting Ni-15En/ZrO₂-1.5 catalyst showed the optimal activity with CO₂ conversion of 86% significantly higher than Ni/ZrO₂-0 of 44% and Ni/ZrO₂-1.5 of 79% at 0.5 MPa and 300 °C. The excellent performance was attributed to increased moderately basic sites for CO₂ adsorption in ZrO₂ nanosheets, as well as the enhanced dispersion of nickel caused by the complexation of Ni ions with En, which inhibited the aggregation of nickel particles in the subsequent thermal treatments. In conclusion, the synergistic effects of the morphology of ZrO₂ nanosheets as well as the chelating behavior of En contributed to the enhanced performance of Ni-15En/ZrO₂-1.5 in the CO₂ methanation reaction. The strategy shows good prospects for controlling the size of active metals, especially those that were dispersed on the surface of the two-dimensional (2D) metal oxide materials.     

Glycine-assisted preparation of highly dispersed Ni/SiO2 catalyst for low-temperature dry reforming of methane

Ni-based catalysts have been widely studied in reforming methane with carbon dioxide. However, Ni-based catalysts tends to form carbon deposition at low temperatures (≤600 °C), compared with high temperatures. In this paper, a series of Ni/SiO₂-XG catalysts were prepared by the glycine-assisted incipient wetness impregnation method, in which X means the molar ratio of glycine to nitrate. XRD, H₂-TPR, TEM and XPS results confirmed that the addition of glycine can increase Ni dispersion and enhance the metal-support interaction. When X ≥ 0.3, these catalysts have strong metal-support interaction and small Ni particle size. The Ni/SiO₂-0.7G catalyst has the best catalytic performance in dry reforming of methane (DRM) test at 600 °C, and its CH₄ conversion is 3.7 times that of Ni/SiO₂-0G catalyst. After 20 h reaction under high GHSV (6 × 10⁵ ml/g_cat/h), the carbon deposition of Ni/SiO₂-0.7G catalyst is obviously lower than that of Ni/SiO₂-0G catalyst. Glycine-assisted impregnation method can enhance the metal-support interaction and decrease the metal particle size，which is a method to prepare highly dispersed and stable Ni-based catalyst.     

Electrocatalytic hydrogen evolution of highly dispersed Pt/NC nanoparticles derived from porphyrin MOFs under acidic and alkaline medium

Platinum (Pt)-based electrocatalysts often exhibit an excellent electrocatalytic activity for hydrogen evolution due to their best hydrogen bonding energy, but materials with high Pt content can easily cause aggregation and reduce their efficiency. In this article, Pt-based electrocatalysts with uniform dispersion and high efficiency were fabricated by a successive hydrothermal and calcination method, and the uniformly distributed Pt nanoparticle was mainly due to the anchoring effect of porphyrin ring in porphyrin MOFs, which made the minimized agglomerations as much as possible in the process of high temperature calcination. The results showed that the optimal Pt/NC-850 could reach current density of 10, 50 and 100 mA cm^?2 with only 17, 82 and 152 mV overpotentials, while the Pt/NC-850 also exhibited a superior stability and durability under acidic medium. Impressively, the Pt/NC-850 also had an excellent activity, good stability and durability under alkaline medium.     

Mixing characteristics for the single and air-water two-phase flows in miniaturized parallel multichannel-based devices

Investigation on the miniaturized parallel multichannel-based devices packed with glass beads to improve the mass exchange execution is the critical focal point of the current study. One of the essential parameters to specify the miniaturized devices' flow distribution is the residence time distribution (RTD). In the present context, the RTDs of a liquid tracer were investigated for the air-water multiphase flows (concurrent) across the multichannel-based miniaturized devices (comprising of 11 similar dimensional parallel channels). The devices were variable in height and packed with glass beads. The conductivity estimations generated the RTD curves and were addressed by the axial dispersion model (ADM). The fluid-flow rates differed within the range of 5–23 ml min⁻¹. The axial dispersion coefficients and the rate of the specific energy dispersion were investigated. The effects of pressure difference and geometry on the hydrodynamic attributes and mixing properties were well-illustrated, and the new correlations were suggested.