Effects of sintering in a high magnetic field on properties of vitrified bond and vitrified CBN composites

Vitrified bond CBN grinding wheels are being widely used due to their superior performance. Also, advantages of vitrified grinding wheels are high elastic modulus, stable chemical property, and low thermal expansion coefficient. Brittleness and low strength are key factors restricting the development of vitrified bond CBN grinding wheels. In this paper, the sintering in a high magnetic field was innovatively introduced into the manufacturing of vitrified bond CBN grinding wheels, and the effects of sintering in a high magnetic field on properties on vitrified bond and vitrified CBN composites were systematically investigated. Vitrified bond was characterized using three-point bending, scanning electron microscopy, X-ray diffraction. It was observed that microstructure of vitrified bond could be changed, grain orientation could be controlled and average grain size could be decreased in a high magnetic field, while vitrified bond strength could be simultaneously improved. High quality vitrified bond could be obtained by appropriately adjusting the strength and direction of high magnetic field. Results demonstrated that vitrified bond properties were improved when the magnetic field strength was 6?T. In order to highlight the high magnetic field effect on the vitrified CBN composites, the ordinary CBN abrasives and nickel plated CBN abrasives were used respectively. Microstructures, bending strengths of vitrified CBN composites were compared in different high magnetic fields. When the magnetic field strength was appropriate (less than 6?T), the binding characteristic of vitrified bond CBN composites with nickel plated CBN abrasives was greatly improved. The highest bending strength value of vitrified CBN composites was 79.5?MPa in 6?T high magnetic field.     

Controlled Individual Skyrmion Nucleation at Artificial Defects Formed by Ion Irradiation

Magnetic skyrmions are particle‐like deformations in a magnetic texture. They have great potential as information carriers in spintronic devices because of their interesting topological properties and favorable motion under spin currents. A new method of nucleating skyrmions at nanoscale defect sites, created in a controlled manner with focused ion beam irradiation, in polycrystalline magnetic multilayer samples with an interfacial Dzyaloshinskii–Moriya interaction, is reported. This new method has three notable advantages: 1) localization of nucleation; 2) stability over a larger range of external field strengths, including stability at zero field; and 3) existence of skyrmions in material systems where, prior to defect fabrication, skyrmions were not previously obtained by field cycling. Additionally, it is observed that the size of defect nucleated skyrmions is uninfluenced by the defect itself—provided that the artificial defects are controlled to be smaller than the inherent skyrmion size. All of these characteristics are expected to be useful toward the goal of realizing a skyrmion‐based spintronic device. This phenomenon is studied with a range of transmission electron microscopy techniques to probe quantitatively the magnetic behavior at the defects with applied field and correlate this with the structural impact of the defects.     

Structural,morphological, dielectric and magnetic properties of Zn-Zr co-doping yttrium iron garnet

In this study, yttrium iron garnet co-doped with Zn and Zr atoms with a chemical formula Y₃Zn_xZr_xFe_(5−2x)O₁₂ (x = 0.0-0.3) has been successfully prepared by the solid-state reaction method. The effects of doping concentration on the microstructure, crystal structure, magnetic properties, and dielectric properties of Y₃Zn_xZr_xFe_(5−2x)O₁₂ were investigated. The microstructure analysis indicates that co-doping of YIG with Zn and Zr can effectively reduce the grain size of the ceramic. The crystal structure results reveal that the doping concentration of Zn–Zr has substantial influence on the lattice parameters of YIG, such as, increases the lattice constant, crystal cell size, and interplanar spacing. However, the second phase of ZrO₂ appears once x ≥ 0.15. Additionally, the dielectric properties of YIG ferrite can be regulated using this Zn–Zr co-doping method. Zn–Zr co-doping can improve the dielectric stability and reduce the dielectric loss at high temperature. The magnetization measurement shows that the saturation magnetization is stabilized at x < 0.15, and the magnetic loss is decreased with the increase in the doping concentration. Overall, the findings show that the ceramic with x = 0.1 exhibits better properties included high saturation magnetization (24.607 emu/g), low magnetic loss (0.0025 @ 1 MHz), and relatively low dielectric loss (496 @ 400°C).     

某贫磁赤铁矿石选矿工艺试验研究

为了使某矿山贫磁赤铁矿资源得到合理的开发利用，针对现开采部位矿石的性质和可选性问题，进行了工艺矿物学和可选性试验研究。试验结果表明：采用弱磁、强磁—阴离子反浮选工艺可得到精矿铁品位68.55%、精矿产率36.41%、金属回收率79.92%、尾矿品位9.86%的较好选别指标，说明矿石的可选性较好，为该矿石的合理开发利用提供了可靠的技术依据。     

用于机床减振的磁流变阻尼器优化设计

以三平动冗余驱动并联机床为研究对象,设计了一种具有位移放大功能的磁流变阻尼器,通过Ansys workbench有限元分析软件,对阻尼器的磁路饱和情况进行模拟仿真和分析,使阻尼器的阻尼出力达到最优。研究结果表明,通过优化使磁场分布更加合理,提高了阻尼器的力学性能,优化方法是可行有效的。     

Design method of the layered active magnetic regenerator (AMR) for hydrogen liquefaction by numerical simulation

The design procedure of an active magnetic regenerator (AMR) operating between liquid nitrogen temperature and liquid hydrogen temperature is discussed with the selected magnetic refrigerants. Selected magnetic refrigerants (GdNi₂, Dy_0.85Er_0.15Al₂, Dy_0.5Er_0.5Al₂, and Gd_0.1Dy_0.9Ni₂) that have different transition temperatures are layered in an AMR to widen the temperature span. The optimum volume fraction of the layered refrigerants for the maximum COP with minimum volume is designed in a two-stage active magnetic regenerative refrigerator (AMRR) using one dimensional numerical simulation. The entropy generation in each stage of the AMR is calculated by the numerical simulation to optimize the proposed design. The main sources of the entropy generation in the AMR are pressure drop, convection and conduction heat transfers in the AMR. However, the entropy generation by the convective heat transfer is mostly dominant in the optimized cases. In this paper, the design parameters and the operating conditions such as the distribution of the selected refrigerants in the layered AMR, the intermediate temperature between two stages and the mass flow rate of heat transfer fluid are specifically determined to maximize the performance of the AMR. The proposed design method will facilitate the construction of AMR systems with various magnetic refrigerants and conditions such as AMR size, operating temperature range, and magnetic field variation.     

Voltage Assisted Control of Spin-Transfer Nano-Oscillators

The spin-transfer nano-oscillator(STNO) has recently acquired a huge amount of research interest, due to its promising easy tunability along with the miniature size. The output frequency control of an STNO through magnetic field and current has been examined almost to its full extent; however, there are issues that still need to be addressed. Here, we propose a novel way of voltage control of the output frequency of an STNO, and alongside reducing its power requirement.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.