Molecular dynamics simulations of the interaction between OH radicals in plasma with poly-β-1–6-N-acetylglucosamine

Cold atmospheric plasma shows a satisfactory ability to inactivate bacterial biofilms that are difficult to remove using conventional methods in some cases. However, the researches on the inactivation mechanism are not quite sufficient. Poly-β-1–6-N-acetylglucosamine (PNAG), which is one of the important components in some biofilms, was used as the research subject, and the related mechanism of action triggered by different concentrations of the OH in plasma was studied using reactive molecular dynamics simulations. The results showed that OH radicals could not only trigger the hydrogen abstraction reaction leading to cleavage of the PNAG molecular structure, but undergo an OH addition reaction with PNAG molecules. New reaction pathways appeared in the simulations as the OH concentration increased, but the reaction efficiency first increased and then decreased. The simulation study in this paper could, to some extent, help elucidate the microscopic mechanism of the interaction between OH radicals in plasma and bacterial biofilms at the atomic level.     

Experimental investigation of multiphase flow behavior in drilling annuli using high speed visualization technique

Imaging with high definition video camera is an important technique to visualize the drilling conditions and to study the physics of complex multiphase flow associated with the hole cleaning process. The main advantage of visualizing multiphase flow in a drilling annulus is that the viewer can easily distinguish fluid phases, flow patterns and thicknesses of cutting beds. In this paper the hole cleaning process which involves the transportation of cuttings through a horizontal annulus was studied. The two-phase (solid-liquid) and the three-phase (solid-liquid-gas) flow conditions involved in this kind of annular transportation were experimentally simulated and images were taken using a high definition camera. Analyzing the captured images, a number of important parameters like velocities of different phases, heights of solid beds and sizes of gas bubbles were determined. Two different techniques based on an image analysis software and MATLAB coding were used for the determinations. The results were compared to validate the image analyzing methodology. The visualization technique developed in this paper has a direct application in investigating the critical conditions required for efficient hole cleaning as well as in optimizing the mud program during both planning and operational phases of drilling. Particularly, it would be useful in predicting the cuttings transport performance, estimating solid bed height, gas bubble size, and mean velocities of bubbles/particles.     

Sustainable Production of Surfactants from Renewable Resources(Online First, Recommended Article)

Surfactants are important chemical products, serving as emulsifiers and interfacial modifiers in the household detergents, personal care products, paints and coatings, foods, cosmetics, and pharmaceuticals industries. This review focuses upon recent advances in research and development to improve the ecological sustainability of surfactants throughout their life cycle, including derivation from renewable resources, production using green manufacturing principles, and improved biocompatibility and biodegradability during their consumer use and disposal stages. Biobased surfactants, derived from vegetable oils, polysaccharides, proteins, phospholipids, and other renewable resources, currently comprise approximately 24% of the surfactant market, and this percentage is expected to increase, especially in Asia. The use of renewables is attractive to consumers because of reduced production of CO2, a greenhouse gas associated with climate change. Enzymes can greatly increase process sustainability, through reduced use of organic solvent, water, and energy, and reduced formation of by-products and waste products. Among the enzymes being investigated for surfactant synthesis, lipases are the most robust, due to their relatively high biocatalytic activity, operational stability and their ability to form or cleave ester, amide, and thioester bonds. For enzymes to be robust catalysts of surfactants, further research and development is needed to improve catalytic productivity, stability and reduce their purchase cost.     

基于一种云计算数据保护的多级加密算法的应用研究

云计算是分布式计算技术的一种,其最基本的概念是透过网络将庞大的计算处理程序自动分拆成无数个较小的子程序,再交由多部服务器所组成的庞大系统经搜寻、计算分析之后将处理结果回传给用户。云计算中的数据泄漏已经成为云计算的巨大威胁,据不完全统计数据,仅在2019年1年,大约有超40亿条信息被泄露。这些信息涵盖科技、医疗、政府、金融、教育、制造等十几个领域数百个行业,数据泄露已经成为云计算中数据安全的巨大威胁。主要提出了一种多级加密算法,能更好地保护云计算中的数据,并能以极小的成本在云计算中得到应用。     

Selective hydrogenation of acetylene over Pd/CeO2

Five hundred ppm Pd/CeO₂ catalyst was prepared and evaluated in selective hydrogenation of acetylene in large excess of ethylene since ceria has been recently found to be a reasonable stand-alone catalyst for this reaction. Pd/CeO₂ catalyst could be activated in situ by the feed gas during reactions and the catalyst without reduction showed much better ethylene selectivity than the reduced one in the high temperature range due to the formation of oxygen vacancies by reduction. Excellent ethylene selectivity of ~100% was obtained in the whole reaction temperature range of 50°C–200°C for samples calcined at temperatures of 600°C and 800°C. This could be ascribed to the formation of Pd_xCe_1−xO_2−y or Pd-O-Ce surface species based on the X-ray diffraction and X-ray photoelectron spectroscopy results, indicating the strong interaction between palladium and ceria.     

纳米红磷的制备及其光降解性能的研究

采用水热-研磨的方法处理商业红磷(C-RP)获得纳米级RP光催化剂。选择罗丹明B(RhB)考察该催化剂的光催化活性。研究结果表明C-RP经水热后选择研磨处理,其光催化活性显著提高。当研磨2h时,光催化剂体现出最高的光催化活性,其光降解速率常数是3.16×10^-2 min^-1,是C-RP的8.25倍。系列表征结果表明C-RP水热-研磨处理后提高其光催化活性的主要原因是:粒径变小,具有更多的活性位点,提高光生电子和空穴的迁移和分离。另外,通过捕获剂实验,最终确定在光降解反应过程中起主要作用的是光生空穴(h^+)和超氧基自由基(O2^·-)。     

A large-grain-size thick-film polycrystalline diamond detector for x-ray detection

A diamond film with a size of 6 × 6 × 0.5 mm³ is fabricated by electron-assisted chemical vapor deposition. Raman spectrum analysis, x-ray diffraction and scanning electron microscope images confirm the high purity and large grain size, which is larger than 300 μm. Its resistivity is higher than ${10}^{12}\,{\rm{\Omega }}\cdot {\rm{cm}}.$ Interlaced-finger electrodes are imprinted onto the diamond film to develop an x-ray detector. Ohmic contact is confirmed by checking the linearity of its current–voltage curve. The dark current is lower than 0.1 nA under an electric field of 30 kV cm⁻¹. The time response is 220 ps. The sensitivity is about 125 mA W⁻¹ under a biasing voltage of 100 V. A good linear radiation dose rate is also confirmed. This diamond detector is used to measure x-ray on a Z-pinch, which has a double-layer 'nested tungsten wire array'. The pronounced peaks in the measured waveform clearly characterize the x-ray bursts, which proves the performance of this diamond detector.     

Electron transfer mediator PCN secreted by aerobic marine Pseudomonas aeruginosa accelerates microbiologically influenced corrosion of TC4 titanium alloy

Titanium alloys possess excellent corrosion resistance in marine environments,thus the possibility of their corrosion caused by marine microorganisms is neglected.In this work,microbiologically influenced corrosion (MIC) of TC4 titanium alloy caused by marine Pseudomonas aeruginosa was investigated through electrochemical and surface characterizations during a 14-day immersion test.Results revealed that the unstable surface caused by P.aeruginosa resulted in exposure of Ti2O3 and severe pitting corrosion with maximum pit depth of 5.7 μm after 14 days of incubation.Phenazine-1-carboxy[ate (PCN),secreted by P.aeruginosa,promoted extracellular electron transfer (EET) and accelerated corrosion.Deletion of the phzH gene,which codes for the enzyme that catalyzes PCN production,from the P.aeruginosa genome,resulted in significantly decreased rates of corrosion.These results demonstrate that TC4 titanium alloy is not immune to marine MIC,and EET contributes to the corrosion of TC4 titanium alloy caused by P.aeruginosa.     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

The structure of an electronegative magnetized plasma sheath with non-extensive electron distribution

In this paper, an electronegative magnetized plasma sheath model with non-extensive electron distribution is established, and the Bohm criterion affected by the non-extensive parameter q is theoretically derived. The ion Mach number varies with q. The numerical simulation results show that compared with electronegative magnetized plasma sheath with Maxwell distribution (q = 1), the sheath structures with super-extensive distribution (q < 1) and sub-extensive distribution (q > 1) are different. The physical quantities including the sheath potential distribution, ion density distribution, the electron density distribution, negative ion density distribution and the net space charge density distribution are discussed. It is shown that the non-extensive parameter q has a significant influence on the structure of the electronegative magnetized plasma sheath. Due to the Lorentz force, both the magnitude and the angle of the magnetic field affect the structure of the sheath, whether the electrons are Maxwell distributed or non-extensively distributed.