基于神经网络技术的注塑成型注射压力和熔体温度预测

建立了基于径向基函数网络的注塑成型注射压力和熔体温度的预测模型，与BP神经网络模型和CAE结果进行了对比。结果表明，径向基函数网络在精度、训练速度等方面优于BP网络。     

沈阳含蜡油稀释三榨脱蜡新工艺

本文研制出一种新型的含蜡油稀释三榨脱蜡新工艺,该工艺对加工沈北减二线含蜡油十分有效,提高了石蜡质量与产量。     

The Moisture Distribution of High Moisture Content Rough Rice During Harvesting, Storage, and Drying

The kernel moisture content (MC) distribution of five varieties of double season rice was tested during the process of harvesting, drying, and tempering. Significant kernel MC variance was found to exist within the panicle. Binodal kernel MC distribution frequency was found at harvest. The MC distribution of five varieties during harvesting and drying showed similar trend of uniformity. To investigate the mechanism of moisture transport among rice kernels under low temperature, the kernel MC distribution of rice planted in Northeastern China was also investigated after stacked for over one month under the temperature of -20°C. The moisture exchange among rice kernels was found greatly influenced by environmental factors.     

(1-x)NBT-xBaTiO3系陶瓷材料制备过程中烧成工艺制度的研究

选取BT6组成点,采用不同的预合成温度、烧结温度和保温时间制备样品,研究各样品的体积密度、线收缩率、晶粒发育状况和压电性能,确定最佳的烧成工艺制度。     

Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells

A series of PtRu nanocomposites supported on H₂O₂-oxidized multi-walled carbon nanotubes (MWCNTs) were synthesized via two chemical reduction methods—one used aqueous formaldehyde (HCHO method) and the other used ethylene glycol (EG method) as the reducing agents. The effects of the solvents (water and ethylene glycol) and the surface composition of the MWCNTs on the deposition and the dispersion of the metal particles were investigated using N₂ adsorption, TEM, ICP-AES, FTIR and TPD. The wetting heats of the MWCNTs in corresponding solvents were also measured. The characterizations suggest that combination of the surface chemistry of the MWCNTs with the solvents decides the deposition and the dispersion of the metal nanoparticles. These nanocomposites were evaluated as proton exchange membrane fuel cell anode catalysts for oxidation of 50 ppm CO contaminated hydrogen and compared with a commercial PtRu/C catalyst. The data reveal superior performances for the nanocomposites prepared by the EG method to those by the HCHO method and even to that for the commercial analogue. Structure–performance relationship of the nanocomposites was also studied.     

浸入式水口燃烧式烘烤预热温度场研究

浸入式水口在浇钢以前必须进行充分预热 ,利用燃烧的煤气烘烤水口是常用的预热烘烤方式。本工作运用有限元技术对浸入式水口燃烧式烘烤预热的瞬态传热过程进行了研究 ,得到了水口烘烤预热后的温度场分布和水口的升温曲线。研究结果表明 ,在燃烧式预热烘烤方式下 ,水口沿轴线方向的温度变化梯度较大 ,水口颈部预热后的温度较低 ,是导致水口颈部频繁断裂和较易出现竹节样裂纹的主要原因。欲提高水口颈部的预热温度 ,必须改进水口的预热烘烤方式     

间歇窑窑墙温度场图形仿真研究

本文利用有限差分法求解间歇窑窑墙中的温度分布，并用Ｃ语言设计了窑墙温度场图形仿真软件。输入窑墙厚度和材料的物性参数等，系统可进行窑墙温度场分布的实时仿真及窑炉结构与操作的优化     

Anodic dissolution of spongy titanium in ethanol solution for preparation of nano-sized TiO2 powder

Nano-sized TiO₂ powder was prepared by electrochemical dissolution of spongy titanium in an ethanol solution following direct hydrolysis of the electrolyte solution. Characterization of the electrochemical product revealed that Ti(OEt)₄ was formed by anodic dissolution of spongy titanium in ethanol solution. X-ray diffraction and transmission electron microscope were, respectively, used to investigate the structure of TiO₂. This study showed that nano-sized TiO₂ prepared by this method has a structural and thermal stability with a narrow size distribution of 5-10 nm. The optimum electrochemical operating conditions established were a temperature of 333-343 K, current density of 400 A m⁻² and faradaic efficiency of 86%. Experiments showed that this process might be recommended as a promising technique for synthesis of nano-sized powder.     

陶瓷磨光弧面板的开发与应用

研究了陶瓷板材在各种温度及压力下产生的应力、应变与板材断裂之间的关系和规律,提出了陶瓷板材的弯曲方法,研制各种专用试验、生产设备,将成品陶瓷平板加工成为园柱板、弧面、球面、圆锥面、双曲面等各种曲面板.