金属基复合材料制备中有害界面反应的控制和润湿性的改善工艺

介绍了液态法制备颗粒增强金属基复合材料（以SiCp／Al为例）过程中，如何控制增强相颗粒和基体之间发生的有害界面反应、改善增强颗粒与基体润湿性的常用方法。结果表明，添加Si元素、添加Ti、Zr、Nb、V等合金元素、表面涂覆和处理以及控制工艺方法和参数都可有效地抑制有害的界面反应发生和改善基体和增强相的润湿性。     

中国钛发展的四十年

系统介绍了钛基复合材料的最新研究和发展，涉及非连续颗粒增强和连续纤维增强两大类钛基复合材料近１０多年来的研究成果和发展趋势；重点评述了钛基材和增强剂的选择，增强剂与基体界面反应的研究，扩散障碍涂层技术和钛基复合材料制造工艺的研究和发展，讨论了钛基复合材料的应用前景。     

Thixoforging of continuous fiber-reinforced AlSi/AlMg-alloys

High strength in combination with low density is the key features for lightweight constructions in automotive and aerospace applications. Tailor-made fiber reinforcements in light-metal matrices could help to achieve this goal. However, the integration of fibers with conventional casting-route manufacturing techniques like squeeze casting or diffusion bonding restricts the component geometry and results in elevated process cost due to long cycle times and the need of additional fiber coatings. In the center of competence for casting and thixoforging Stuttgart (CCT), new processes for manufacturing metal matrix composites are developed. Long-fiber reinforced Al–Si alloys and components are produced by thixoforging of laminates made of alternating metal matrix layers and carbon fiber fabrics. This paper illustrates the manufacturing technology and first experimental results with special focus on fiber penetration and infiltration behavior and also on the formation of fiber-matrix interface to analyze fiber damage by mechanical or chemical attack.     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

Pullout behavior of polypropylene fibers from cementitious matrix

A comprehensive experimental investigation was performed to understand the pullout behavior of polypropylene fibers from a cementitious matrix. The effect of embedded length on the pullout characteristics, the development of the interfacial bond with age of curing of matrix and the effect of exposure to degrading environments, like seawater and salt water, on the interfacial bond between the fibers and cementitious matrix were studied. The aim of these experiments was to understand the properties of fiber/matrix interface, which are of primary significance in predicting the overall behavior of fiber-reinforced cement-based composites. Polypropylene fibers have a weak bond with cementitious matrix because of smooth surface of fibers, which does not allow for sufficient friction to develop between the two. In this study a new method to improve the frictional bond by means of mechanical indentations of fibers was also proposed. The bonding performance was characterized by means of pullout tests of the plain and modified fibers from a cementitious matrix. An optimum level of fiber modification for maximization of bond efficiency was determined experimentally.     

玻纤增强PA66／PP合金的特性及应用

介绍玻纤增强ＰＡ６６／ＰＰ合金的制备工艺及特性，与纯尼龙６６树脂相比，加工性能好，综合性能优异。该材料适用于中小型油浸式变压器的分接开关及其它绝缘部件。     

Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction

Concretes containing different types of hybrid fibers at the same volume fraction (0.5%) were compared in terms of compressive, splitting tensile, and flexural properties. Three types of hybrid composites were constructed using fiber combinations of polypropylene (PP) and carbon, carbon and steel, and steel and PP fibers. Test results showed that the fibers, when used in a hybrid form, could result in superior composite performance compared to their individual fiber-reinforced concretes. Among the three types of hybrids, the carbon-steel combination gave concrete of the highest strength and flexural toughness because of the similar modulus and the synergistic interaction between the two reinforcing fibers.     

Variance-penalized Markov decision processes: dynamic programming and reinforcement learning techniques

In control systems theory, the Markov decision process (MDP) is a widely used optimization model involving selection of the optimal action in each state visited by a discrete-event system driven by Markov chains. The classical MDP model is suitable for an agent/decision-maker interested in maximizing expected revenues, but does not account for minimizing variability in the revenues. An MDP model in which the agent can maximize the revenues while simultaneously controlling the variance in the revenues is proposed. This work is rooted in machine learning/neural network concepts, where updating is based on system feedback and step sizes. First, a Bellman equation for the problem is proposed. Thereafter, convergent dynamic programming and reinforcement learning techniques for solving the MDP are provided along with encouraging numerical results on a small MDP and a preventive maintenance problem.     

加筋生态护坡技术的应用与发展

在越来越注重工程生态性的今天,生态护坡在道路、堤防、城市水利等方面得到了广泛应用。然而很多情况下,生态护坡在强度上无法满足工程设计的要求。加筋生态护坡是土工织物与植草相结合形成的一种护坡形式,在保证工程生态性的同时大大提高了生态护坡的强度,近年来逐渐得到重视与应用。综合介绍了加筋生态护坡的发展历程,将其概括为传统生态护坡、普通加筋生态护坡和高性能加筋生态护坡3个阶段,在此基础上对加筋生态护坡使用的不同结构型式和材质的土工合成材料进行了分类总结,针对国内外加筋生态护坡技术的研究现状和主要结论,结合实例分析了加筋生态护坡的工程应用,指出在保护边坡、减少水土流失及改善生态环境方面的作用。最后,展望了未来需要研究的方向。     

超高分子量聚乙烯纤维/有机玻璃复合材料摩擦磨损性能研究

用真空浸渍法成功制备出了超高分子量聚乙烯纤维／有机玻璃(UHMWPE／PMMA)复合材料，并对基体材料PMMA，单向超高分子量聚乙烯纤雏／有机玻璃复合材料以及三维编织超高分子量聚乙烯纤维／有机玻璃(即UHMWPE3D／PMMA)复合材料的摩擦磨损性能进行了研究。实验证明UHMWPE／PMMA复合材料具有优良的摩擦磨损性能。经过纤维增强的复合材料的摩擦磨损性能优于基体材料，三维编织纤维增强的复合材料其磨损远小于单向纤维增强的复合材料，但其摩擦系数没有显著变化。