Study of the key factors affecting the triple grid lifetime of the LIPS-300 ion thruster

In order to ascertain the key factors affecting the lifetime of the triple grids in the LIPS-300 ion thruster,the thermal deformation,upstream ion density and component lifetime of the grids are simulated with finite element analysis,fluid simulation and charged-particle tracing simulation methods on the basis of a 1500 h short lifetime test.The key factor affecting the lifetime of the triple grids in the LIPS-300 ion thruster is obtained and analyzed through the test results.The results show that ion sputtering erosion of the grids in 5 kW operation mode is greater than in the case of 3 kW.In 5 kW mode,the decelerator grid shows the most serious corrosion,the accelerator grid shows moderate corrosion,and the screen grid shows the least amount of corrosion.With the serious corrosion of the grids in 5 kW operation mode,the intercept current of the acceleration and deceleration grids increases substantially.Meanwhile,the cold gap between the accelerator grid and the screen grid decreases from 1 mm to 0.7 mm,while the cold gap between the accelerator grid and the decelerator grid increases from 1 mm to 1.25 mm after 1500 h of thruster operation.At equilibrium temperature with 5 k W power,the finite element method(FEM)simulation results show that the hot gap between the screen grid and the accelerator grid reduces to 0.2 mm.Accordingly,the hot gap between the accelerator grid and the decelerator grid increases to 1.5 mm.According to the fluid method,the plasma density simulated in most regions of the discharge chamber is 1?×?10~(18)-8?×?10~(18)m~(-3).The upstream plasma density of the screen grid is in the range 6?×?10~(17)-6?×?10~(18)m~(-3)and displays a parabolic characteristic.The charged particle tracing simulation method results show that the ion beam current without the thermal deformation of triple grids has optimal perveance status.The ion sputtering rates of the accelerator grid hole and the decelerator hole are 5.5?×?10~(-14)kg s~(-1)and 4.28?×?10~(-14)kg s~(-1),respectively,while after the thermal deformation of the triple grids,the ion beam current has over-perveance status.The ion sputtering rates of the accelerator grid hole and the decelerator hole are 1.41?×?10~(-13)kg s~(-1)and 4.1?×?10~(-13)kg s~(-1),respectively.The anode current is a key factor for the triple grid lifetime in situations where the structural strength of the grids does not change with temperature variation.The average sputtering rates of the accelerator grid and the decelerator grid,which were measured during the 1500 h lifetime test in5 k W operating conditions,are 2.2?×?10~(-13)kg s~(-1)and 7.3?×?10~(-13)kg s~(-1),respectively.These results are in accordance with the simulation,and the error comes mainly from the calculation distribution of the upstream plasma density of the grids.     

人工神经网络在水文领域中的应用

水文现代化某种程度上讲就是自动化,贯穿数据的收集、整理、提炼整个过程,这是必然的历史趋势。从数据的收集到数据的整理,进一步从数据中创造价值,离不开数据库和数据挖掘技术。人工神经网络作为人工智能的一个主要部分,对于海量数据的处理比人工处理更有效率,这种工具作为人的帮手减少了重复性的工作量,为人们的选择和决策提供依据。掌握这些工具,让其为水文工作在更多的社会领域发挥作用,是这代水文工作者的历史使命。     

某明洞基础设计探讨

文章通过一桩板结构处理明洞段软土地基的工程设计实例,分析了桩板结构与上部明洞结构共同作用时的受力特点,按简化计算方法进行了承台板的配筋设计,提出了类似工程设计中可以进行优化的地方和结构施工中的一些注意事项。     

疏水性纳米SiO2填充PDMS/PET复合膜的制备及分离性能研究

采用聚酯(PET)为支撑层,以疏水性气相法纳米SiO2填充改性的聚二甲基硅氧烷(PDMS)为皮层制备硅橡胶复合膜,用SEM、WSM-5 KN、TGA对膜改性后的物理形貌、拉伸强度及热稳定性进行分析与表征,并以乙醇/水物系为研究对象,着重考察了料液温度和浓度对改性复合膜渗透分离性能的影响.结果表明,改性膜的热稳定性显著提高,拉伸强度从空白膜的1.5 MPa增加到7.4 MPa.随着疏水气相法纳米SiO2含量的增加填充膜的分离因子极值不断增加并提前.     

直流电位法检测高温合金的疲劳裂纹扩展性能

介绍了在高温下使用直流电位法测定疲劳裂纹长度的基本原理、试验方法及所需配置的仪器,并对有关影响因素进行了分析;并利用Johnson的分析型关系式,研究了一种适用于自动测定材料高温疲劳裂纹长度的直流电位法,该方法已成功应用于高温合金疲劳裂纹扩展试验,其测得的疲劳裂纹扩展速率da/dN-ΔK数据与长焦聚显微镜法测得的数据完全一致。     

活性炭催化臭氧化处理含氰废水的试验研究

研究了活性炭催化臭氧化降解低质量浓度含氰废水,考察了臭氧投加量、活性炭用量、pH值等因素对处理效果的影响.试验结果表明:活性炭对臭氧有明显的催化作用,并可以提高臭氧的利用率;在CN-初始质量浓度150 mg/L、臭氧投加量30 mg/min、活性炭14 g/L、反应30 min条件下,CN-去除率为99.8%,相对于单...     

高炉炼铁技术的发展

随着全球资源、能源和经济形势的变化,高炉炼铁技术进入一个全新的变革时代,高炉节能减排、高炉大型化和长寿技术以及稳定操作等技术都有了新的突破。本文对这些方面的主要进展进行了综述,并对技术的发展趋势做了展望。     

对我国城市建筑物屋面绿化的效益分析

简要叙述了我国城市建筑物屋面绿化技术的发展现状,对屋面绿化的经济效益、生态环境效益和节能效益进行了详细分析,并提出了提高屋面绿化效益的对策与措施.