Facile fabrication of MOF-decorated nickel iron foam for highly efficient oxygen evolution

Metal-organic frameworks (MOFs) have emerged as efficient electrocatalysts due to the features of high specific surface area, rich pore structure and diversified composition. It is still challenging to synthesize self-supporting MOF-based catalysts using simple and low-cost fabrication methods. Herein, we successfully fabricated Ni-doped MIL-53(Fe) supported on nickel-iron foam (Ni-MIL-53(Fe)/NFF) as efficient electrocatalyst. A facile two-step solvothermal method without adding any metal salts was used, which can simplify the fabrication process and reduce the experimental cost. In the fabrication process, the bimetallic Ni-MIL-53(Fe)/NFF was in situ converted from an intermediate NiFe₂O₄/NFF. The obtained material exhibits outstanding electrocatalytic oxygen evolution performance with a low overpotential of 248 mV at 50 mA cm^?2, and a small Tafel slope of 46.4 mV dec^?1. This work sheds light on the simple and efficient preparation of bimetallic MOF-based material, which is promising in electrocatalysts.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Strong tribocatalytic dye degradation by tungsten bronze Ba4Nd2Fe2Nb8O30

The triboelectric effect has recently demonstrated its great potential in environmental remediation and even new energy applications for triggering a number of catalytic reactions by utilizing trivial mechanical energy. In this study, Ba₄Nd₂Fe₂Nb₈O₃₀ (BNFN) submicron powders were used to degrade organic dyes via the tribocatalytic effect. Under the frictional excitation of three PTFE stirring rods in a 5 mg/L RhB dye solution, BNFN demonstrates a high tribocatalytic degradation efficiency of 97% in 2 h. Hydroxyl radicals (?OH) and superoxide radicals (?O₂－) were also detected during the catalysis process, which proves that triboelectric energy stimulates BNFN to generate electron-hole pairs. The tribocatalysis of tungsten bronze BNFN submicron powders provides a novel and efficient method for the degradation of wastewater dye by utilizing trivial mechanical energy.     

Relaxor behavior and energy storage density induced by B-sites substitutions in (Ca0.28Ba0.72)2.1Na0.8Nb5O15 Tungsten bronze ceramics

Lead-free relaxor ferroelectrics (Ca_0.28Ba_0.72)_2.1Na_0.8Nb_5-xSb_xO₁₅ (CBNNS) and (Ca_0.28Ba_0.72)_2.1Na_0.8Nb_5-yTa_yO₁₅ (CBNNT) with tungsten bronze structure were fabricated via solid-state reactions. The obtained CBNNS and CBNNT ceramics showed different dielectric behaviors. Only the CBNNS ceramics revealed an intensified diffusion and relaxor-like characteristics, which could be verified by the modified Curie–Weiss law. The relaxor behaviors in CBNNS were attributed to the radii difference between Sb⁵⁺ and Nb⁵⁺ ions co-occupying in B-sites. For the substitution of Nb⁵⁺ by Sb⁵⁺ in CBNNS ceramics, the change from macroscopic polarization to local polarization could also give rise to the obvious relaxor behavior. The Raman spectra verified a larger off-centering of the cation and a higher distortion degree for BO₆ octahedron in the ab plane for CBNNS ceramics when compared with those of CBNNT. In addition, the ferroelectric properties of CBNNS ceramics further indicated the relaxor ferroelectric nature, and also confirmed that the relaxor behavior helped to improve the energy-storage performance.     

Effect of annealing atmosphere on the structure and dielectric properties of unfilled tungsten bronze ceramics Ba4PrFe0.5Nb9.5O30

Unfilled tungsten bronze ceramics with the nominal formula Ba₄PrFe_0.5Nb_9.5O₃₀ were synthesized via the standard solid-state sintering route, and the effects of oxygen vacancies on the dielectric and electrical properties were investigated in addition to the structure. Room-temperature X-ray diffraction showed that the N₂-annealed sample had the largest cell volume. Low-temperature spectrum showed that N₂ annealing rendered the dielectric constant and dielectric loss more frequency dispersive, whereas O₂ annealing inhibited the frequency dispersion. The dc conductivity of all the samples originated from the electrons produced in the second ionization of oxygen vacancies and was most likely controlled by a mixed conduction mechanism of the electron and oxygen-vacancy ions. The N₂-annealed sample has the highest dc conductivity owing to its high concentration of oxygen vacancies. The broadening of the Raman lines and the decrease of Raman intensity for the N₂-annealed sample originated from a significant structural disorder. X-ray photoelectron spectra demonstrated that the increased oxygen vacancies caused by the change of valences of Fe and Pr ions contributed to the structural disorder.     

单组份聚氨酯炮孔填塞剂应用性试验

炮孔填塞是爆破施工过程中的一个关键环节,也是践行精细爆破设计理论的重要措施。传统的炮泥填塞存在着诸多不足,为此,研制了以聚氨酯为基材的TK炮孔填塞剂,通过大量基础性能研究和隧道现场工业性试验,论证了其作为炮孔填塞材料可降低炸药单耗,提高单循环进尺和炮孔利用率,减小空气冲击波、爆破噪声等有害效应的影响,且是安全可靠的。TK炮孔填塞剂优良的填塞效果、方便快捷的施工方法及显著的经济效益,方便于在爆破工程中推广应用。     

The effect of co-substitution on the microwave dielectric properties of Ba6-3xNd8+2xTi18O54(x=2/3) ceramics

In this work, the microwave dielectric properties of Ba₄(Nd_1-yBi_y)_28/3Ti_18-x(Al_1/2Ta_1/2)_xO₅₄(0≤x≤2, 0.05≤y≤0.2) ceramics co-substituted by A/B-site were studied. Firstly, (Al_1/2Ta_1/2)⁴⁺ was used for substitution at B-site. At 0≤x≤1.5, the above mentioned ceramic was found to exist in single-phase tungsten bronze structure, but at x = 2.0, the secondary phase appeared. Although the dielectric constant decreased by doping the (Al_1/2Ta_1/2)⁴⁺, but the quality factor was observed to improve by 40% and the temperature coefficient of resonant frequency decreased by 75%. Based on the above results, Bi³⁺ was introduced to Ba₄Nd_28/3Ti₁₇(Al_1/2Ta_1/2)O₅₄. The introduction of Bi³⁺ reduced the sintering temperature, greatly improved the dielectric constant, and ultimately decreased the temperature coefficient of resonant frequency, but it led to deterioration of quality factor. At last, with appropriate site-substitution content control (x = 1.0,y = 0.15), excellent comprehensive properties (ε_r = 89.0, Q × f = 5844 GHz @ 5.89 GHz，TCF = +8.7 ppm/°C) were obtained for the samples sintered at 1325 °C for 4 h.     

Stabilization of natural gas foams using different surfactants at high pressure and high temperature conditions

Natural gas foam can be used for mobility control and channel blocking during natural gas injection for enhanced oil recovery, in which stable foams need to be used at high reservoir temperature, high pressure and high water salinity conditions in field applications. In this study, the performance of methane (CH₄) foams stabilized by different types of surfactants was tested using a high pressure and high temperature foam meter for surfactant screening and selection, including anionic surfactant (sodium dodecyl sulfate), non-anionic surfactant (alkyl polyglycoside), zwitterionic surfactant (dodecyl dimethyl betaine) and cationic surfactant (dodecyl trimethyl ammonium chloride), and the results show that CH₄-SDS foam has much better performance than that of the other three surfactants. The influences of gas types (CH₄, N₂, and CO₂), surfactant concentration, temperature (up to 110°C), pressure (up to 12.0 MPa), and the presence of polymers as foam stabilizer on foam performance was also evaluated using SDS surfactant. The experimental results show that the stability of CH₄ foam is better than that of CO₂ foam, while N₂ foam is the most stable, and CO₂ foam has the largest foam volume, which can be attributed to the strong interactions between CO₂ molecules with H₂O. The foaming ability and foam stability increase with the increase of the SDS concentration up to 1.0 wt% (0.035 mol/L), but a further increase of the surfactant concentration has a negative effect. The high temperature can greatly reduce the stability of CH₄-SDS foam, while the foaming ability and foam stability can be significantly enhanced at high pressure. The addition of a small amount of polyacrylamide as a foam stabilizer can significantly increase the viscosity of the bulk solution and improve the foam stability, and the higher the molecular weight of the polymer, the higher viscosity of the foam liquid film, the better foam performance.     

A generalized CFD model for evaluating catalytic separation process in structured porous materials

A hybrid multiphase model is developed to simulate the simultaneous momentum, heat and mass transfer and heterogeneous catalyzed reaction in structured catalytic porous materials. The approach relies on the combination of the volume of fluid (VOF) and Eulerian–Eulerian models, and several plug-in field functions. The VOF method is used to capture the gas–liquid interface motion, and the Eulerian–Eulerian framework solves the temperature and chemical species concentration equations for each phase. The self-defined field functions utilize a single-domain approach to overcome convergence difficulty when applying the hybrid multiphase for a multi-domain problem. The method is then applied to investigate selective removal of specific species in multicomponent reactive evaporation process. The results show that the coupling of catalytic reaction and interface species mass transfer at the phase interface is conditional, and the coupling of catalytic reaction and momentum transfer across fluid–porous interface significantly affects the conversion rate of reactants. Based on the numerical results, a strategy is proposed for matching solid catalyst with operating condition in catalytic distillation application.     

Facile synthesis of Ni doped CoWO4 nanoarrays grown on nickel foam substrates for efficient urea oxidation

Urea electrolysis is a promising technology for hydrogen production, which can alleviate environmental pollution of urea-rich wastewater. It's worth noting that electrochemistry activity can be significantly improved by reasonably regulating the electron configuration around the active site for the doped materials. In this work, a series of well-tuned Ni doped CoWO₄ nanoarrays on Ni foam supports have been prepared through a typical hydrothermal approach for the first time. Moreover, the resulting Ni–CoWO₄-2 material significantly promotes urea oxidation performance with an applied potential of 1.35 V at 50 mA cm^?2, which is lower than that of water oxidation reaction (1.60 V). Density functional theory results suggest that the Ni doped CoWO₄ has larger urea adsorption energy compared with CoWO₄ and the CO(NH₂)₂ molecule is strongly adsorbed on surface of Ni doped CoWO₄, which is beneficial to accelerate the kinetics of the reaction and improve the electrocatalytic activity of the urea electrolysis.