Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

高熔体流动速率薄壁注塑聚丙烯专用料的结构与性能分析

采用多种分析测试方法，对3类高熔体流动速率薄壁注塑聚丙烯（PP）专用料的熔融结晶性能、光学性能、分子量分布、力学性能、毛细管流变性能、热收缩性能进行了分析研究。结果表明，K1860与2种市售主流PP1、PP2各项性能相当，其中K1860分子量分布相对PP1、PP2较窄，弯曲性能、拉伸性能更优，可满足大型薄壁注塑制品的生产要求。     

Random poly(ε‐caprolactone‐L‐alanine) by direct melt copolymerization

A series of random polyesteramides (PEAs) with a range of molar composition from 90/10 to 50/50 were synthesized by direct melt polycondensation of ε‐caprolactone and l ‐alanine. Their structure was fully characterized by Fourier transform IR and NMR spectroscopy. The resulting copolymers are completely amorphous with the exception of PEA‐90/10 which possesses a semicrystalline structure. These PEAs present increasing glass transition temperatures at increasing l ‐alanine contents and exhibit fairly good thermal stability with 10% mass loss temperatures reaching 315 °C. © 2020 Society of Industrial Chemistry     

Anodic process on Cu−Al alloy in KF−AlF3−Al2O3 melts and suspensions

Anodic processes on Cu−10Al electrode in molten KF−AlF₃−Al₂O₃ (saturated) and suspensions were characterized using chronopotentiometric and cyclic voltammetric techniques. Effects of cryolite ratio (CR= x(KF)/x(AlF₃)), temperature and particle volume fraction (ϕ) on the electrochemical behaviour of the anode were demonstrated. Initially, the anode was polarised in the galvanostatic mode in melt and suspensions (ϕ=0.12, 0.15) at 750 °C with 0.4 A/cm² current density. The anode potential in melt varied between 2.5 and 3.2 V and in suspensions (ϕ= 0.12) between 3.3 and 3.4 V. XRD analysis was conducted to study the oxide phases on the anode surface. Anode limiting current densities and mass transfer coefficients drastically decreased with the increase of ϕ in the suspension. The results suggest that the Cu−10Al electrode works better in suspensions with CR of 1.4 and particle volume fraction of 0.09 at 800 °C.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

The effects of processing parameters on the morphology of PLA/PEG melt electrospun fibers

Electrospinning of a polymer melt is an ideal technique to produce highly porous nanofibrous or microfibrous scaffolds appropriate for biomedical applications. In recent decades, melt electrospinning has been known as an eco‐friendly procedure as it eliminates the cytotoxic effects of the solvents used in solution electrospinning. In this work, the effects of spinning conditions such as temperature, applied voltage, nozzle to collector distance and collector type as well as polyethylene glycol (PEG) concentration on the diameter of melt electrospun polylactic acid (PLA)/PEG fibers were studied. The thermal stability of PLA/PEG blends was monitored through TGA and rheometry. Morphological investigations were carried out via optical and scanning electron microscopy. Based on the results, blends were almost stable over the temperature range of melt electrospinning (170 ? 230 °C) and a short spinning time of 5 min. To obtain non‐woven meshes with uniform fiber morphologies, experimental parameters were optimized using ANOVA. While increasing the temperature, applied voltage and PEG content resulted in thinner fibers, PEG concentration was the most influential factor on the fiber diameter. In addition, a nozzle to collector distance of 10 cm was found to be the most suitable for preparing uniform non‐woven PLA/PEG meshes. At higher PEG concentrations, alterations in the collector distance did not affect the uniformity of fibers, although at lower distances vigorous bending instabilities due to polarity augmentation and viscosity reduction resulted in curly fibrous meshes. Finally, the finest and submicron scale fibers were obtained through melt electrospinning of PLA/PEG (70/30) blend collected on a metallic frame. © 2017 Society of Chemical Industry     

UHMWPE/HDPE/纳米SiO2共混体系的毛细管挤出流变行为

采用毛细管流变仪,研究了超高分子量聚乙烯(UHMWPE)/高密度聚乙烯(HDPE)/纳米二氧化硅(SiO2)共混体系,及其对照组的流变行为和挤出过程中的不稳定流动现象,分析了共混物发生鲨鱼皮畸变和整体破裂的临界剪切应力和临界剪切速率的变化情况。结果表明,经过偶联剂改性的纳米SiO2粒子,在PE基质的共混体系中存在一定的界面黏附作用,降低了纳米共混体系的挤出胀大比,弹性特征减轻。这种界面相互作用限制了纳米共混材料在口模区域的黏性流动以及分子链离开口模后的构象恢复,降低了发生流动不稳定现象的临界剪切速率,发生鲨鱼皮畸变的临界剪切应力增大,整体破裂后,形成交替出现"鲨鱼皮-破裂"的振荡性变化外观。