Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping

Titanium and boron are simultaneously introduced into LiNi_0.8Co_0.1Mn_0.1O₂ to improve the structural stability and electrochemical performance of the material. X-ray diffraction studies reveal that Ti⁴⁺ ion replaces Li⁺ ion and reduces the cation mixing; B³⁺ ion enters the tetrahedron of the transition metal layers and enlarges the distance of the [LiO₆] layers. The co-doped sample has spherical secondary particles with elongated and enlarged primary particles, in which Ti and B elements distribute uniformly. Electrochemical studies reveal the co-doped sample has improved rate performance (183.1 mAh·g^-1 at 1 C and 155.5 mAh·g^-1 at 10 C) and cycle stability (capacity retention of 94.7% after 100 cycles at 1 C). EIS and CV disclose that Ti and B co-doping reduces charge transfer impedance and suppresses phase change of LiNi_0.8Co_0.1Mn_0.1O_2.     

A comprehensive review of wheat phytochemicals: From farm to fork and beyond

The health benefits of whole wheat consumption can be partially attributed to wheat's phytochemicals, including phenolic acids, flavonoids, alkylresorcinols, carotenoids, phytosterols, tocopherols, and tocotrienols. It is of increasing interest to produce whole wheat products that are rich in bioactive phytochemicals. This review provides the fundamentals of the chemistry, extraction, and occurrence of wheat phytochemicals and includes critical discussion of several long-lasting issues: (1) the commonly used nomenclature on distribution of wheat phenolic acids, namely, soluble-free, soluble-conjugated, and insoluble-bound phenolic acids; (2) different extraction protocols for wheat phytochemicals; and (3) the chemistry and application of in vitro antioxidant assays. This review further discusses recent advances on the effects of genotypes, environments, field management, and processing techniques including ultrafine grinding, germination, fermentation, enzymatic treatments, thermal treatments, and food processing. These results need to be interpreted with care due to varied sample preparation protocols and limitations of in vitro assays. The bioaccessibility, bioavailability, metabolism, and potential health benefits of wheat phytochemicals are also reviewed. This comprehensive and critical review will benefit scientific researchers in the field of bioactive compounds of cereal grains and also those in the cereal food industry to produce high-quality functional foods.     

Low dielectric constant polyimide mixtures fabricated by polyimide matrix and polyimide microsphere fillers

Polyimide microspheres were prepared via non‐aqueous emulsion polymerization by using pyromellitic dianhydride (PMDA) as anhydride monomer and 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane as amine monomer. The polyimide microspheres were well characterized by Fourier transform infrared spectroscopy, SEM and laser particle size analyzer. They were spherical in shape and monodisperse and their size was 31–33 μm. Polyimide mixtures formed by polyimide microspheres as fillers and polyimide composed of pyromellitic and dianhydride 4,4′‐oxydianiline (ODA) as matrix were investigated with regard to thermal properties, dielectric properties and mechanical properties. With 10%–50% polyimide microspheres in the polyimide mixtures, the dielectric constants were 2.26–2.48 (1 MHz) and the loss tangents were 0.00663–0.00857 (1 MHz), which were both significantly lower than the values for ODA‐PMDA polyimide. The decomposition temperature and glass transition temperature were above 440 and 290 °C. The polyimide mixtures possessed excellent thermal resistance. When the percentage of polyimide microsphere addition was 30%, the polyimide mixtures had the largest tensile strength (128.50 MPa) and elongation at break (9.01%). These results indicate that the polyimide microspheres were used as both low dielectric fillers and reinforcing fillers. © 2020 Society of Chemical Industry     

Thermoplastic and low dielectric constants polyimides based on BPADA-BAPP

ABSTRACT

The thermoplastic and low dielectric constants polyimides were introduced. The polyimides were prepared by pyromellitic dianhydride (PMDA) or 4,4?-(4,4?-Isopropylidenediphenoxy)diphthalic anhydride (BPADA) as anhydride monomer and 4,4?-oxydianiline (ODA) or 2,2-bis(4-(4-aminephenoxy)phenyl)propane (BAPP) as amine monomer. The polyimides were well characterized by FT-IR, thermogravimetric analysis, dynamic thermomechanical analysis, dielectric measurement, and tensile test. The dielectric constants were 2.32–2.95 compared with 3.10 of ODA-PMDA polyimide, while partly polyimides were thermoplastic. The results indicated anhydride monomers, containing lateral methyl groups, made polyimides become thermoplastic. The results of molecular simulations via Materials Studio also proved this conclusion.     

含钒高氮高强耐候钢结晶器保护渣开发

针对含钒高氮高强耐候钢成分中V、N元素含量较高,且碳含量处在包晶反应区,浇铸过程中容易产生皮下网状裂纹缺陷的问题,在分析缺陷原因以及钢种浇铸对保护渣特殊要求的基础上,从保护渣结晶性能、润滑性能和配碳模式3个方面设计开发了适应该类钢种浇铸的结晶器保护渣理化性能指标。从现场推广应用效果来看,浇铸拉速由原来的0.70~0.75 m/min提高到0.90~0.95 m/min,保护渣液渣层厚度控制在9~11 mm,消耗量控制在0.45~0.65 kg/t,Q450NQR1高强耐候钢铸坯表面无缺陷率达到90.14%,热轧板卷起层缺陷率由41.29%降至4.24%。     

α径迹法用于分辨高浓铀和Pu微粒的方法研究

擦拭样品微粒分析技术是核保障环境样品分析的一种主要手段，从大量灰尘颗粒中识别并定位含高浓铀（HEU）或含Pu微粒是微粒分析首先需要解决的问题。本文以HEU和Pu微粒为研究对象，建立了用于微粒α径迹测量的样品制备方法，采用CR-39固体径迹探测器为α径迹探测器，测量了不同蚀刻时间2种微粒产生的α径迹星的径迹参数。结果表明：可通过测量径迹短轴与曲率直径并作图来分辨HEU和Pu微粒，该方法对于蚀刻时间大于10 h的微粒径迹星，均能明显分辨，对于径迹非常密集的径迹星，也能准确分辨。     

Scaling behavior of dynamic hysteresis of PMN-PT relaxor ferroelectric ceramics near the morphotropic phase boundary

Due to the feature of domains, ferroelectric materials display hysteresis behavior with respect to the change of the applied electric field. Every ferroelectric material has its own unique hysteresis loop reflecting the information of domain reversal under an electric field. In this work, the scaling behaviors of dynamic hysteresis in relaxor (1-x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (PMN-PT) ceramics with different compositions were studied systemically. Our results showed that the evolution of scaling behavior in PMN-PT ceramics can be divided into three stages, which is independent of the phase structure of the ceramics and the testing electric field frequency. The relationship between hysteresis area <A> and field amplitude E₀ obeys the power law <A>∝ in the low and high E₀ regions, where the reorientations of 180° and non-180° domain are dominant, respectively. However, the dynamic hysteresis area <A> does not follow the power law in the intermediate E₀ regions, which is attributed to the interaction of different domain reversal mechanisms. Furthermore, the hysteresis area <A> decreases gradually with increasing frequency at a certain E₀ and the time-dependent domain reversal process was also discussed.     

Co-doping effects of (Al,Ti, Mg) on the microstructure and electrical behavior of ZnO-based ceramics

Co-doped ZnO-based ceramics using Al, Ti, and Mg ions in different ratios were synthesized with the objective to investigate the doping effects on the crystalline features, microstructure and the electrical behavior. For Al and Ti doping, a coexistence of crystalline phases was shown with a major wurtzite ZnO structure and secondary spinel phases (ZnAl₂O₄, Zn₂TiO₄, or Zn_aTi_bAl_cO_d), while Mg doping did not alter significantly the structural features of the wurtzite ZnO phase. The electrical behavior induced by Al, Ti, and Mg co-doping in different ratios was investigated using Raman, electron paramagnetic resonance (EPR) and ²⁷Al and ⁶⁷Zn solid-state nuclear magnetic resonance (NMR). Al doping induces a high electrical conductivity compared to other doping elements. In particular, shallow donors from Zn_i-Al_Zn defect structures are inferred from the characteristic NMR signal at about 185 ppm; that is, quite far from the usual oxygen coordinated Al. The Knight shift effect emanating from a highly conducting Al-doped ZnO ceramics was considered as the origin of this observation. Oppositely, as Ti doping leads to the formation of secondary spinel phases, EPR analysis shows a high concentration of Ti³⁺ ions which limit the electrical conductivity. The correlation between the structural features at the local order, the involved defects and the electrical behavior as function of the doping process are discussed.     

管壳式换热器内孔焊接残余应力特性研究

常规焊接会使管壳式换热器的换热管与管板之间形成一定的缝隙。换热器长期处于腐蚀性介质环境中,因此易产生缝隙腐蚀和应力腐蚀开裂,通过内孔焊接的方式可有效降低这类腐蚀风险。以Q245材料为研究对象,利用ABAQUS软件对焊接过程中温度场、应力场进行了模拟,研究了管壳式换热器内孔焊接的残余应力分布、设备变形情况,以及不同内孔焊结构残余应力和变形程度的差异,总结了焊接工艺参数对深孔焊接残余应力的影响规律。研究结果表明:全对接型接头的应力集中范围更小,设备应力分布更均匀、变形量较小,焊缝质量较高、承载能力较强。     

Poly(ε‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) amphiphilic copolymers prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization: Synthesis,self‐assembly,and thermoresponsive property

Thermoresponsive graft copolymers of ε‐caprolactone and N‐isopropylacrylamide were synthesized by a combination of ring‐opening polymerization and the sequential atom transfer radical polymerization (ATRP). The copolymer composition, chemical structure, and the self‐assembled structure were characterized. The graft length and density of the copolymers were well controlled by varying the feed ratio of monomer to initiator and the fraction of chlorides along PCL backbone, which is acting as the macroinitiator for ATRP. In aqueous solution, PCL‐g‐PNIPAAm can assemble into the spherical micelles which comprise of the biodegradable hydrophobic PCL core and thermoresponsive hydrophilic PNIPAAm corona. The critical micelle concentrations of PCL‐g‐PNIPAAm were determined under the range of 6.4–23.4 mg/L, which increases with the PNIPAAm content increasing. The mean hydrodynamic diameters of PCL‐g‐PNIPAAm micelles depend strongly on the graft length and density of the PNIPAAm segment, allowing to tune the particle size within a wide range. Additionally, the PCL‐g‐PNIPAAm micelles exhibit thermosensitive properties and aggregate when the temperature is above the lower critical solution temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41115.