Computational and experimental study of dental resin composites with high filler content

Journal of Materials Science - Nanocomposites have been used in various industries due to their excellent properties. For some of them, high filler content (over 50 wt%) is beneficial to improving...     

中央链提升机链条国产化替代经验交流

我公司一线始建于1999年，由成都水泥工业设计研究院有限公司设计、中材建设有限公司总包，是国内水泥行业第一条交钥匙总包项目。该生产线的主机设备均选用进口产品，其中生料入库提升机选用的是德国AUMUND公司的产品，该提升机链条采用的是模锻中央链条，从2001年投入运行后，链条连续使用了15年，自2014年起每年对该提升机链条进行停机检查，发现链条伸长量、辊套磨损值等已超过报警值并接近极限值，因此在2016年初开始启动新链条国产化的采购工作，同时在2016年三季度按计划对该链条进行了替代更换，目前链条已经稳定运行4年，使用情况良好。     

Gelling behavior of MgAl2O4 slurries with a common dispersant

MgAl₂O₄ transparent ceramics were shaped by a commonly used polyacrylic acid (PAA), which acted as both dispersant and gelling agent. The spinel slurries were prepared by ball-milling MgAl₂O₄ powder, PAA, and water in an attrition mill. The gelling of slurries happened at room temperature in air atmosphere without any other organic additive. The gelling mechanism was the formation of chelates between Mg²⁺ and carboxyl groups (-COO⁻) of PAA. The frequency-based testing method was applied to investigate the gelling process of the as-prepared slurry. In addition, a novel in situ characterization method based on a modified indentation testing was invented to better understand the strengthening of the wet green body with time and to guide when demolding could be carried out. After sintering, transparent MgAl₂O₄ ceramics with high in-line transmittance were resulted.     

Memory-based dynamic event-triggered control for networked interval type-2 fuzzy systems subject to DoS attacks

In this article, the memory-based dynamic event-triggered controller design issue is investigated for networked interval type-2 (IT2) fuzzy systems under non-periodic denial-of-service (DoS) attacks. For saving limited network bandwidth, a novel memory-based dynamic event-triggered mechanism (DETM) is proposed to schedule data communication. Unlike existing event-triggered generators, the developed memory-based DETM can utilize a series of newly released signals and further save network resources by introducing interval dynamic variables. Moreover, to improve design flexibility, an IT2 fuzzy controller with freely selectable fuzzy rule number and premise membership functions (MFs) is synthesized. Then, a new switched time-delay system with imperfectly matched MFs is established under the consideration of memory-based DETM and DoS attacks simultaneously. Besides, based on the property of MFs, the boundary information of membership grades and slack matrices are introduced in the stability analysis. Furthermore, by using a piecewise Lyapunov–Krasovskii method, membership-functions-dependent criteria are deduced to ensure the asymptotic stability of built fuzzy switched systems. Finally, the effectiveness of proposed control strategies is demonstrated by simulation examples.     

ZnCo2O4纳米管的合成及其电化学性能研究

采用静电纺丝法制备ZnCo₂O₄一维纳米纤维前驱体，通过不同的煅烧温度得到纤维结构完整的ZnCo₂O₄纳米管。通过XRD、SEM和电化学测试等方法对ZnCo₂O₄材料进行结构和性能表征。研究结果表明，制备的纳米纤维直径在0.13～0.22μm之间，且纤维结构完整，表面粗糙，有利于电解液的渗透和储存。在100 mA/g的条件下，ZnCo₂O₄的首次可逆比容量达到972.9 mAh/g，循环200次后，比容量仍能保持431.2 mAh/g以上。     

变压器用冷却装置产氢问题的分析与处理

本文通过对变压器的冷却装置受潮的原因和受潮后产氢的机理进行了分析,提出了现场除氢办法,对变压器制造企业和运行单位具有一定的指导意义.