基于虚拟元-有限元耦合的隧道内道床干缩裂缝细观研究

为解释道床与盾构隧道管片产生脱空的现象，研究新混凝土在浇筑后由干燥收缩产生的裂缝机理。基于虚拟元推导任意多边形骨料的刚度矩阵格式，利用UEL子程序实现有限元与虚拟元的耦合计算，纯弯梁数值试验结果表明耦合法较有限元法计算效率明显提升，且具有较好的稳定性。在此基础上，建立细观尺度下新老混凝土的干缩数值模型，并通过圆盘干缩模型验证了模型参数。研究骨料和砂浆的应力分布、内部湿度与裂缝发展的对应关系以及新老混凝土表面和界面的应力发展。结果表明：①收缩过程中，骨料主要承受压应力作用，砂浆沿骨料边界的切线方向受骨料约束作用易形成收缩裂缝，在新混凝土表面首先出现大量微小裂缝，随后界面两端发生剥离; ②受表面下骨料的约束作用，新混凝土表面拉应力呈现“驼峰”分布。开裂后表面被划分为多个收缩区，收缩区边界受拉应力，内部受压应力；③界面的拉伸和剪切应力由两侧开始增加，并且随着界面剥离的增加不断内移。在界面内部未剥离区域内存在由界面附近骨料约束导致的局部压应力和剪切应力增大。     

Nonlinearity in regulating the metal to insulator transition of ReNiO3 towards low temperature range

Among the existing material family of the correlated oxides, the rare earth nickelates (ReNiO₃) exhibit broadly adjustable metal to insulator transition (MIT) properties that enables correlated electronic applications, such as thermistors, thermochromics, and logical devices. Nevertheless, how to accurately control the critical temperature (T_MIT) of ReNiO₃ via the co-occupation of the rare-earth elements is yet worthy to be further explored. Herein, we demonstrate the non-linearity in adjusting the T_MIT of ReNiO₃ towards lower temperatures via introducing Pr co-occupation within ReNiO₃ (e.g., Pr_xNd_1-xNiO₃ and Pr_xSm_1-xNiO₃) as synthesized by KCl molten-salt assisted high oxygen pressure reaction approach. Although the T_MIT is effectively reduced via Pr substitution, it does not strictly follow a linear relationship, in particular, when there is large difference in the ionic radius of the co-occupation rare-earth elements. Furthermore, the most significant deviation in T_MIT from the expected linear relationship appears at an equal co-occupation ratio of the two different rare-earth elements, while the abruption in the variation of resistivity across T_MIT is also reduced. The present work highlights the importance to use adjacent rare-earth elements with co-occupation ratio away from 1:1 for achieving more linear adjustment in designing the metal to insulator transition properties for ReNiO₃.     

微型土压平衡盾构机液压系统故障分析

以微型土压平衡(Earth Pressure Balance,EPB)盾构机推进液压系统作为研究对象,介绍了推进系统的工作原理,对混入空气后的油液黏度和有效体积弹性模量进行分析,建立了推进系统数学模型,并对混入不同百分比空气的系统进行仿真运算,得到了液压缸位移响应和速度响应随系统含气量变化的关系。研究表明:随着液压系统空气含量的增加,液压缸位移响应发生迟滞,速度响应变慢,液压缸在运动时产生振动。结合各液压元件工作原理,依次对实际盾构机推进系统元件进行排气,最终排除了液压系统中混入的空气,为实现盾构机平稳推进提供了理论依据。     

Electrical oscillation generation with current-induced resistivity switching in VO2 micro-channel devices

We report large amplitude modulation waveforms as large as ~ 10 V using vanadium dioxide micro-channel devices operating under current-controlled conditions. The self-sustained electrical oscillations were generated by controlling the applied current in the negative differential resistance region of the investigated devices. An appropriate value of internal capacitance was achieved as parasitic capacitance in the device structure to stabilize the electrical oscillations. This eliminates the need of an external pulsed source or any external passive component connected to the micro-channel devices. Amplitude and frequency of the oscillation were tuned by illuminating the device micro-channel with an external laser. An equivalent circuit model was developed to simulate the waveforms. A good agreement between experiment and simulation was verified.     

Structural properties and sensing performance of CeTiO3 ceramic films as a solid-state pH sensor

In this paper, we have studied the impact of postannealing treatment on the structural properties and sensing characteristics of CeTiO₃ ceramic membranes deposited on Si substrate by sputtering for solid-state electrolyte-insulator-semiconductor (EIS) pH sensors. X-ray photoelectron spectroscopy, Auger electron spectroscopy, X-ray diffraction, and atomic force microscopy were used to study the chemical compositions, elemental depth profiles, film structures, and surface morphologies of CeTiO₃ ceramic membranes treated at three rapid thermal annealing (RTA) temperatures of 700, 800 and 900?°C. The sensing performance of the CeTiO₃ ceramic membranes annealed at three different RTA temperatures is strongly correlated to their structural properties. The CeTiO₃ EIS device after RTA at 800?°C exhibited the best sensing characteristics (pH sensitivity, hysteresis voltage and drift rate) among these RTA temperatures. We attribute this behavior to the optimal RTA temperature enhancing the Ce³⁺/Ce⁴⁺ ratio of CeTiO₃ ceramic membrane, reducing an interfacial layer at the CeTiO₃-Si interface, and increasing its surface roughness.     

基于Kӧtter方程的盾构掘进面上被切削土体受力研究

为了计算不同土体性质与不同掘进参数下盾构刮刀与土体之间的作用力以及由此带来的切削扭矩,引入了修正后的Kӧtter方程作为补充方程,求解出开挖面上土体在被动切削至破坏时滑动面上的应力分布,建立了被切削土体受力模型,求解出刮刀刃面与土体之间的正压力p、摩擦力Q与侧向土体间抗剪阻力U,进而推导出刀盘切削扭矩T的计算公式。分析得到特定刀盘上刮刀的p,Q,U值随土体c,φ值增大而增大,通过适当提高刮刀刃面粗糙度来增大摩擦可使土体更易被切至破坏;p,Q,U值随刀盘转速ω增大而减小,p,Q随支护荷载p线性增大且p对于被切削土体受力的影响在砂性土中较大,最终给出特定刀盘掘进至部分种类土体中的切削扭矩值作为工程参考。     

电子束诱导沉积钴微米线及其铁磁性

通过电子束诱导沉积的方法制备了钴(Co)微米线,并利用扫描电子显微镜(SEM)、原子力/磁力显微镜(AFM/MFM)以及物性测量系统(PPMS)等手段对Co微米线的沉积尺寸、微结构、铁磁性和电学性质进行了测试和分析。研究结果表明:Co微米线轮廓清晰、均匀性好。在不同的沉积条件下,微米线的实际长度与设定长度基本一致;实际宽度数据呈类梯形分布,半高宽是设定值的2~10倍;实际厚度低于设定厚度的60%。沉积电流对Co微米线的铁磁特性有重要影响。当沉积电流大于0.5 nA时,样品呈现出良好的铁磁特性。另外,电学性能测试结果显示Co微米线呈现绝缘特性。成功制备了室温铁磁绝缘Co微米线,这将有助于深入开展微纳尺度的结构与器件的研究和应用。     

用于厚屏蔽小探测器的蒙特卡罗模拟减方差方法研究

反应堆屏蔽计算中经常出现厚屏蔽、小探测器问题，常规蒙特卡罗方法难以有效解决。基于自动重要抽样（AIS）方法，本文提出了小探测器自动重要抽样(SDAIS)方法，并针对小探测器问题，优化了AIS方法的虚粒子赌分裂算法。该方法在自主开发的蒙特卡罗屏蔽程序MCShield上进行了实现。使用NUREG/CR-6115 PWR基准题验证该方法的正确性和计算效率。结果表明，SDAIS方法可有效地解决厚屏蔽小探测器问题，相比AIS方法及传统的重要性方法，计算效率提升1~2个量级。     

All-printed and highly stable organic resistive switching device based on graphene quantum dots and polyvinylpyrrolidone composite

We propose all printed and highly stable organic resistive switching device (ORSD) based on graphene quantum dots (G-QDs) and polyvinylpyrrolidone (PVP) composite for non-volatile memory applications. It is fabricated by sandwiching G-QDs/PVP composite between top and bottom silver (Ag) electrodes on a flexible substrate polyethylene terephthalate (PET) at ambient conditions through a cost effective and eco-friendly electro-hydrodynamic (EHD) technique. Thickness of the active layer is measured around 97 nm. The proposed ORSD is fabricated in a 3 × 3 crossbar array. It operates switching between high resistance state (HRS) and low resistance state (LRS) with OFF/ON ratio ∼14 for more than 500 endurance cycles, and retention time for more than 30 days. The switching voltage for set/reset of the devices is ±1.8 V and the bendability down to 8 mm diameter for 1000 cycles are tested. The elemental composition and surface morphology are characterized by XPS, FE-SEM, and microscope.     

Real-time analysis and prediction of shield cutterhead torque using optimized gated recurrent unit neural network

An accurate prediction of earth pressure balance (EPB) shield moving performance is important to ensure the safety tunnel excavation. A hybrid model is developed based on the particle swarm optimization (PSO) and gated recurrent unit (GRU) neural network. PSO is utilized to assign the optimal hyperparameters of GRU neural network. There are mainly four steps: data collection and processing, hybrid model establishment, model performance evaluation and correlation analysis. The developed model provides an alternative to tackle with time-series data of tunnel project. Apart from that, a novel framework about model application is performed to provide guidelines in practice. A tunnel project is utilized to evaluate the performance of proposed hybrid model. Results indicate that geological and construction variables are significant to the model performance. Correlation analysis shows that construction variables (main thrust and foam liquid volume) display the highest correlation with the cutterhead torque (CHT). This work provides a feasible and applicable alternative way to estimate the performance of shield tunneling.