Influence of the Impaction Angle on the Triboelectric Charging of Aerosol Nanoparticles

A low pressure impactor is used to measure triboelectric charging behavior of metallic nanoparticles. Ag nanoparticles, produced by spark discharge, were impacted onto Pt sputtered targets. The influence of the impaction angle and impaction velocity on the triboelectric charging was investigated. While for perpendicular impaction the charge transfer behavior of previous work was confirmed, the oblique impaction revealed new phenomena. Additional charge transfer was observable, which increases with obliqueness. The possibility of mass transfer between particle and target due to the high-energy collisions was also investigated. SEM characterization and Auger spectroscopy indicate mass transfer from the particle to the target surface.     

Comparative study of embrittlement of quenched and tempered steels in hydrogen environments

The study of steels which guarantee safety and reliability throughout their service life in hydrogen-rich environments has increased considerably in recent years. Their mechanical behavior in terms of hydrogen embrittlement is of utmost importance. This work aims to assess the effects of hydrogen on the tensile properties of quenched and tempered 42CrMo4 steels. Tensile tests were performed on smooth and notched specimens under different conditions: pre-charged in high pressure hydrogen gas, electrochemically pre-charged, and in-situ hydrogen charged in an acid aqueous medium. The influence of the charging methodology on the corresponding embrittlement indexes was assessed. The role of other test variables, such as the applied current density, the electrolyte composition, and the displacement rate was also studied. An important reduction of the strength was detected when notched specimens were subjected to in-situ charging. When the same tests were performed on smooth tensile specimens, the deformation results were reduced. This behavior is related to significant changes in the operative failure micromechanisms, from ductile (microvoids coalescence) in absence of hydrogen or under low hydrogen contents, to brittle (decohesion of martensite lath interfaces) under the most stringent conditions.     

Detection of 5-HMF in apple juice with artificial sensing systems

5-HMF (5-hydroxymethyl-furfural) is a product of thermal treatment and is increasingly considered a food contaminant. Here, different concentrations of 5-HMF were measured in apple juice to evaluate the performance of the electronic nose (EN) and electronic tongue (ET) as rapid detection techniques for 5-HMF when coupled with chemometric analysis. Principal component analysis (PCA) and linear discriminant analysis (LDA) evaluated the discrimination capacity of EN and ET for 5-HMF. Loading analysis examined the discrimination contribution of the EN sensors. Partial least square (PLS) regression analysis established a quantitative prediction model for different concentrations of 5-HMF based on EN and ET data set. The optimal models had a coefficient of determination (R²) of 0.926 and a root-mean-square error of prediction (RMSEP) of 0.4168 in EN; there were R² of 0.914 and RMSEP of 0.5836 in ET. These results demonstrate that EN and ET coupled with chemometric analysis are two promising approaches for the rapid and online detection of 5-HMF in apple juice.     

TiO2/MXene-Assisted LDI-MS for Urine Metabolic Profiling in Urinary Disease

Cancer remains an intractable medical problem. Rapid diagnosis and identification of cancer are critical to differentiate it from nonmalignant diseases. High-throughput biofluid metabolic analysis has potential for cancer diagnosis. Nevertheless, the present metabolite analysis method does not meet the demand for high-throughput screening of diseases. Herein, a high-throughput, cost-effective, and noninvasive urine metabolic profiling method based on TiO₂/MXene-assisted laser desorption/ionization mass spectrometry (LDI-MS) is presented for the efficient screening of bladder cancer (BC) and nonmalignant urinary disease. Combined with machine learning, TiO₂/MXene-assisted LDI-MS enables high diagnostic accuracy (96.8%) for the classification of patient groups (including 47 BC and 46 ureteral calculus (UC) patients) from healthy controls (113 cases). In addition, BC patients can also be identified from noncancerous UC individuals with an accuracy of 88.3% in the independent test cohort. Furthermore, metabolite variations between BC and UC individuals are investigated based on relative quantification, and related pathways are also discussed. These results suggest that this method, based on urine metabolic patterns, provides a potential tool for rapidly distinguishing urinary diseases and it may pave the way for precision medicine.     

Investigation of the hydrogen induced cracking behaviour of API 5L X65 pipeline steel

The effect of microstructural features on the hydrogen induced cracking (HIC) susceptibility of two API 5L X65 pipeline steels were investigated by cathodic charging, hydrogen permeation and hydrogen microprint experiments. Microstructural evaluation after hydrogen charging revealed cracks at the mid-thickness (segregation zone) of both plates. However, more severe cracks were observed in the plate with higher dislocation density and residual stresses. The plate with lower plastic strain and more {111}-oriented grains had less severe cracks. Inclusions found along the crack path, comprising of Si-enriched oxides and carbides contributed to the initiation and propagation of cracks. The variation of the trapping behaviour and hydrogen diffusion through the plates were examined. The results confirmed that a higher ratio of reversible to irreversible traps contributes to increasing HIC severity in steels. Additionally, hydrogen transport through the steels was most prominent along the grain boundaries, indicating the importance of grain boundary character to HIC.     

通过RRLC-Q-TOF MS和UPLC-QQQ MS分析原人参三醇型皂苷在人肠道菌群中的代谢产物

通过高分离度快速液相色谱-四极杆飞行时间质谱(RRLC-Q-TOF MS)和超高效液相色谱-三重四极杆质谱(UPLC-QQQ MS)法对原人参三醇型皂苷Re、Rg 1、Rg 2、Rh 1、Rf、F 1、R 1在人肠道菌群中的转化产物进行定性、定量分析,确定原人参三醇型皂苷的代谢产物、转化途径和60 h时的转化率。结果表明,人参皂苷Re的转化产物为人参皂苷Rg 1、Rg 2、Rh 1、F 1和PPT,转化率为91%;人参皂苷Rg 1的转化产物为人参皂苷Rh 1、F 1和PPT,转化率为80%;人参皂苷Rg 2的转化产物为人参皂苷Rh 1和PPT,转化率为73%;人参皂苷Rh 1和F 1主要通过PPT代谢,转化率分别为82%和81%;人参皂苷Rf的转化产物为人参皂苷Rh 1和PPT,转化率为89%;三七皂苷R 1的转化产物为人参皂苷Rg 1、R 2、Rh 1和PPT,转化率为79%。原人参三醇型皂苷类成分可被人肠道菌群代谢,主要通过丢失糖残基形成转化产物,而次级皂苷和苷元是人参在体内发挥药理作用的物质基础。     

快速凝固高硅铝合金加热过程中的组织转变

利用气雾化法制备高硅铝合金粉末,采用光学显微镜(OM)、扫描电镜(SEM)等现代测试手段,分析快速凝固高硅铝合金不同粒度粉末微观组织和结构特征,研究在不同加热温度和保温时间条件下针状富铁相的转变特性及β-Si相的粗化行为。结果表明:快速凝固高硅铝合金组织主要以基体上分布有大量细小的颗粒状和针状相为特征,合金粉末在加热过程中,随着温度的升高和保温时间的延长,颗粒β-Si相有粗化趋势,针状非平衡富铁相转变为棒状或颗粒状平衡相。通过台阶式连续加热模拟试验可获得针状相基本消失且颗粒β-Si相未发生明显粗化的组织。     

郴州某复杂硫化铅锌矿阶段磨浮试验研究

针对郴州某复杂硫化铅锌矿资源的性质特点,采用铅快速浮选后尾矿再磨再选的阶磨阶选工艺,较好地实现了铅锌的高效浮选回收。研究了磨矿方式、捕收剂和调整剂种类及用量等因素对该矿石浮选的影响,确定了最佳浮选条件,通过小型闭路浮选试验,得到了铅品位60.05%、回收率89.63%的铅精矿和锌品位47.01%、回收率88.14%的锌精矿。     

喷射成形Al-Zn-Mg-Cu合金挤压态的组织和力学性能

研究了利用喷射成形辅以挤压制备Al-5.72Zn-2.36Mg-1.66Cu合金后优化的组织结构特征和力学性能。结果表明,合金基体组织均匀细化,晶粒形貌趋于圆整,平均晶粒大小达到10 μm左右。当合金的冷却条件通过快速凝固技术改变时,会产生不同程度的固溶强化效果和第二相弥散强化效果,从而改善了合金的整体性能。合金的屈服强度和抗拉强度分别平均提高了20%左右,且伸长率也略有提高。