Computational and experimental study of dental resin composites with high filler content

Journal of Materials Science - Nanocomposites have been used in various industries due to their excellent properties. For some of them, high filler content (over 50 wt%) is beneficial to improving...     

Self-healing,elastic and deformable novel composite phase change polymer based on thermoplastic elastomer SEBS for wearable devices

Journal of Materials Science - Form-stable composite phase change materials (C-PCMs) prepared by microencapsulation method and porous matrix adsorption method need for compression molding after...     

Fresh beef tumbling at different post-mortem times to improve tenderness and proteolytic features of M. longissimus lumborum

The aim of this study was to determine the effects of tumbling at different post-mortem times on the proteolytic features and quality attributes of beef loins (M. longissimus lumborum). Loins (n = 12) were cut into 4 sections and assigned to tumbling at 1, 6 or 11 days post-mortem or non-tumbled control. Upon tumbling, additional ageing was applied to a common post-mortem time of 16 days. In general, tumbling had no considerable impacts on water-holding ability of samples. Tumbling resulted in an immediate decrease in shear force values (WBSF) of beef samples. Tumbling at 1 day post-mortem with no ageing had similar WBSF compared to the non-tumbled controls at 16 days (P > 0.05). With ageing, tumbling increased amounts of protein degradation, myofibrillar fragmentation and calpain-1 autolysis of samples. These results suggest that early post-mortem tumbling coupled with ageing can synergistically impact the tenderness development of beef loins and shorten the necessary ageing period.     

基于随机搜索树法的机械臂视觉伺服研究

在当今的工业应用中,机械臂完成某一特定作业任务的基础是进行轨迹规划。针对单纯基于图像的视觉伺服(the image-based visual servoing,IBVS),不能直接对相机或机械臂的运行轨迹进行控制,容易造成跟踪目标脱离视野、机械臂与工作空间障碍物相碰撞的问题,本文提出了三维随机搜索树算法(the three-dimensional Rapidly-exploring Random Trees algorithm,3D-RRT)实现机械臂的轨迹规划,将轨迹规划与视觉伺服相融合,使机械臂在跟踪移动过程中,满足图像视野范围限制和空间障碍物约束问题。在MATLAB平台建立算法仿真实验,结果表明三维随机搜索树算法(3D-RRT)可以较好解决基于图像的视觉伺服(IBVS)中存在的问题。     

地表径流速度对城市内涝影响规律

为分析地表径流速度对城市内涝的影响,采用一维地下排水管网与二维城区地形的动态耦合模型,选取大连市某排水区块作为研究区域,设置4种地表径流速度10种设计降雨场景,模拟分析在不同重现期设计降雨及不同地表径流速度下研究区的内涝积水特性。结果表明:随着地表径流速度降低,管道排水压力变小,管道排水达标率最高可提升48.05%,且降雨重现期越短,地表径流流速对管道排水压力的削减效果越明显;地表径流流速对检查井溢流量影响显著,随着地表径流速度降低,检查井溢流量峰值最高可减小2 750 m~3,峰现时间最长可滞后56 min,同时随着降雨重现期增长,地表径流流速对检查井溢流量的削减效果减弱;研究区低、高风险区淹没面积随地表径流速度降低,最高可分别减小1.64万、8.37万m~2,但中风险区淹没面积变化反复。     

Influence of fermentation with different lactic acid bacteria and in vitro digestion on the change of phenolic compounds in fermented kiwifruit pulps

The present study aimed to evaluate the effect of fermentation and gastrointestinal digestion of three kinds of fermented kiwifruit pulps with different Lactobacillus (Lactobacillus plantarum, Lactobacillus acidophilus and Lactobacillus casei). The changes in bioactive substances (total phenolic acid, total flavonoid, vitamin C and the viable count), antioxidant capacity (DPPH, ABTS, hydroxyl radical and superoxide anion radical scavenging activity) and phenolic profiles (protocatechuic acid, protocatechualdehyde, chlorogenic acid, caffeic acid and p-coumaric acid) were detected. The result showed, compared to non-fermented kiwifruit pulp, fermentation with LP and LA had higher content of TPA, TF and V_C, as well as antioxidant capacity. Fermentation with LP and the content of protocatechualdehyde, p-coumaric acid and chlorogenic acid were increased. However, after digestion, LP showed more effect in maintaining the content of antioxidants, antioxidant capacity and the viable count rather than LA. During digestion, the content of protocatechualdehyde and p-coumaric acid was increased in fermented samples compared with non-fermented samples. Overall, compared with LA and LC, LP is more suitable for the fermentation of kiwifruit pulp.     

Integrated LaB6/g-C3N4 solar absorber for solving dye accumulation during solar steam generation

Solar steam generation has attracted considerable interest due to its easy accessibility and sustainability. However, dye molecules were gradually concentrated on bulk water or the surface of solar absorbers during the disposal of dye wastewater. Herein, LaB₆/g-C₃N₄ composites were immobilized on porous cotton cloth, served as a solar absorber resistant to dye clogging. The optimal solar absorber possessed solar harvesting of 92.3% and showed great application potential in the field of the treatment of dye wastewater. This study presented a new approach for the treatment of dye wastewater.