基于多视图立体视觉的沙堆三维尺寸测量研究

利用从运动中恢复结构方法(SFM),提出了一种基于多视图立体视觉的沙堆三维重建及三维尺寸测量方法。首先根据SFM方法的求解不稳定特点,结合光束平差法对SFM求解过程进行分析及优化;其次针对SFM重建结果为稀疏点云的问题,利用基于面片的稠密重建算法重新生成稠密的三维点云,再利用泊松算法对密集点云进行三维曲面重建;最后获得模型的三维尺寸信息。对某建筑工地的沙堆进行了三维尺寸的测量实验,实验结果验证了该方法的有效及可行性,提高了重建能力及精度,同时考虑了目标实际测量误差与重建误差,能够满足实际智能测量的应用需求。     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

Promoted electrocatalytic performance of palladium nanoparticles using doped-NiO supporting materials toward ethanol electro-oxidation in alkaline media

Electrocatalyst support materials play significant role in the performance, durability and commercialization of fuel cells. This research work describes the preparation of metal oxide (nickel oxide (NiO), cobalt (Co) and copper (Cu) doped NiO) support materials on meshed titanium (Ti) substrate via a simple electro-deposition method for their application as novel support material for palladium (Pd) catalyst. Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) techniques are employed to study morphology, composition and structure of fabricated electrodes, respectively. The electrocatalytic performance of fabricated electrodes toward ethanol oxidation reaction (EOR) in alkaline solution is examined by the cyclic voltammetry (CV), chronoamperometry (CA) techniques. Low peak potential (−0.2 V), increased peak current density (62.54 mA cm⁻²) and large electrochemical active surface area (16.02 m² g⁻¹) were remarkable properties of Pd/Cu–NiO/Ti electrode. The results of other electrochemical measurements, CO-striping voltammetry, long-term stability and electrochemical impedance spectroscopy (EIS) revealed that the Pd/Cu–NiO/Ti electrode has the privileged electrocatalytic performance for EOR relative to other prepared electrodes. Accordingly, the Pd/Cu–NiO/Ti can be considered as a hopeful electrode for ethanol electro-oxidation reaction in DEFCs.     

考虑多时间尺度电力交易市场下的配电网最大供电能力模型

为研究多时间尺度电力交易下配电网的最大供电能力,首先从中长期+现货交易模式入手,将多时间尺度下的交易转变为单时间尺度交易;其次,建立考虑多时间尺度电力交易市场下的配电网最大供电能力双层模型,并运用原始对偶内点法和改进的重复潮流算法求解;最后通过算例,对中长期+现货交易模式下的配电网最大供电能力进行计算分析。结果表明,考虑多尺度电力交易下的配电网最大供电能力得到了提升,且随着现货交易的深入,提升得越明显。研究成果可为电力市场环境下提升配电网最大供电能力提供参考。     

从几个典型案例谈燃油系统管理

基于典型故障案例的阐述和故障原因分析，归纳总结了船舶柴油机燃油系统在日常使用和管理中应注意的问题，可为船舶操作人员和管理人员提供参考。     

A new territory and its pioneer: opening up a dominant research stream for a translational research area

Scientometrics - An academic pioneer makes many trials to find relations and results that were unknown before. The verified relations and repeatable results the pioneer finds guide followers to...     

搅拌式风力致热装置启动性能研究

搭建搅拌式风力致热试验台,以自制的2种致热器为研究对象,使其分别在3个不同平均角加速度24.92、14.66、8.04 rad/s2下启动。通过动态扭矩测试仪和数据采集仪测试记录致热器启动阶段的相关数据。结果表明:致热器启动时所需扭矩与角加速度的一次方、转速、叶片半径的二次方成正比,同时得出这些因素之间的关系式;满负荷时,启动扭矩会出现一个峰值,且角加速度越大峰值越大,自然风必须提供峰值以上的扭矩,否则装置无法启动。     

Fabrication and microwave absorption properties of magnetite nanoparticle–carbon nanotube–hollow carbon fiber composites

Absorbents with “tree-like” structures, which were composed of hollow porous carbon fibers (HPCFs) acting as “trunk” structures, carbon nanotubes (CNTs) as “branch” structures and magnetite (Fe₃O₄) nanoparticles playing the role of “fruit” structures were prepared by chemical vapor deposition technique and chemical reaction. Microwave reflection loss, permittivity and permeability of Fe₃O₄–CNTs–HPCFs composites were investigated in the frequency range of 2–18 GHz. It was proven that prepared absorbents possessed the excellent electromagnetic wave absorbing performances. The bandwidth with a reflection loss less than −15 dB covers a wide frequency range from 10.2 to 18 GHz with the thickness of 1.5–3.0 mm, and the minimum reflection loss is −50.9 dB at 14.03 GHz with a 2.5 mm thick sample layer. Microwave absorbing mechanism of the Fe₃O₄–CNTs–HPCFs composites is concluded as dielectric polarization and the synergetic interactions exist between Fe₃O₄ and CNTs–HPCFs.     

Origin of the temperature stability of dielectric constant in CaCu3Ti4O12

The temperature and dc bias stability of the dielectric constant and loss tangent of CaCu₃Ti₄O₁₂ samples sintered under different oxygen atmospheres are discussed. The results suggest that the metal-oxygen vacancy related defects not only provide the charge carriers for the conduction (defect doping) but also contribute to the huge permittivity in the way of defect dipoles repositioning under charge carrier hopping. The charge localization in a specific copper-oxygen vacancy defect complex is the reason of the huge and stable permittivity and low dielectric loss in the middle temperature range, 90 K-200 K (20 Hz), while the implementation of the large barrier layer height needs a contribution by the titanium oxygen vacancy related trap charges in the grain boundaries, which also lead to a second permittivity stable range in a higher temperature range 200 K–300 K.     

Capturing what human eyes perceive: A visual hierarchy generation approach to emulating saliency-based visual attention for grid-like urban street networks

Visual hierarchy is an important notion in urban imagery research. As the skeletons of cities, urban streets attract more attention from urban residents and street network hierarchies are important references for urban planning and urban studies. However, due to the characteristic of over-regularization, it is often difficult for humans to differentiate visual salience for grid-like street networks, resulting in the hierarchies of grid-like streets yielded by existing methods being prone to cause visual cognitive confusion. Therefore, in this study, we proposed a novel model to quantify the extent to which a street attracts human visual attention through emulating the visual attention mechanism that can capture the focus of relatively significant elements at different levels of perception. Using the natural street (also known as the stroke) as the sensor unit, the comprehensive visual salience (CVS) index combining the geometric competitive factors of natural streets at the local scale and psychological competitive factors of natural streets at the global scale is designed. Finally, the visual salience of the urban natural streets is ranked by these CVS scores and the visual hierarchy is derived by the head/tail breaks scheme. The model was applied to eight typical grid-like street networks and the results show that the performance of visual discrimination on street hierarchies is greatly improved. Our hierarchy generation method could effectively detect visually prominent streets for grid-like street networks and generate the visual hierarchies of grid-like street networks that conform to the hierarchies perceived by human eyes. These results would provide helpful suggestions in practical urban street network applications.