Heterogeneously Catalyzed Methanolysis of Gmelina Seed Oil to Biodiesel

The heterogeneous catalysis of transesterification of gmelina seed oil to biodiesel is evaluated. The oil was extracted from the seeds with n‐hexane by solvent extraction and characterized to determine its physiochemical properties. Response surface methodology was applied to optimize the effect of process variables on the biodiesel yield. The base‐activated clay catalyst performed as montmorillonite clay with the characteristic property of a Brønsted acid. It has an improved surface area after activation that enhanced its catalytic activity on transesterification reaction. Under optimal conditions, the biodiesel yield was 70.1 %, thus demonstrating that the model predicted well the biodiesel production.     

Experimental investigation of the effects of contraction on tsunami-induced forces and pressures on a box section bridge

Many bridges that lie within possible tsunami inundation zones are critical links in transport networks. Some efforts have been made to determine the effects of tsunamis on bridges, but only a limited range of published design guidelines are available. Therefore, it is necessary to further investigate the effects of tsunamis on bridges. In the current study, physical modeling experiments were carried out to measure bore impact forces and pressures for various tsunami bore strengths on a bridge deck with different abutment types (wing wall and spill-through) and different opening and submergence ratios. The experiments were conducted in a wave flume with dimensions of 14 × 1.2 × 0.8 m (length × width × height), equipped with an automatic gate designed to generate a tsunami bore. The horizontal and vertical forces showed an increasing trend with increasing submergence ratio for both types of abutment. However, the horizontal force showed a decreasing trend as the opening ratio decreased, while the vertical force initially increased as the opening ratio decreased, until it reached a peak value, and then it started to decrease. The overall shapes of the results for both types of abutment are similar, with higher values for spill-through abutments due to their lower energy dissipation rates. Based on the experimental data, empirical equations are proposed for estimation of tsunami loads as a function of opening and submergence ratios.     

Facile synthesis of black phosphorus directly grown on carbon paper as an efficient OER Electrocatalyst: Role of Interfacial charge transfer and induced local charge distribution

Black phosphorus (BP), as a new 2D material, is normally synthesized by a high-pressure and high-temperature (HPHT) method from white and red phosphorus, which severely hinders the further development of BP for any potential applications and leads to search for other potential applications of BP with big challenge. Herein, we develop a facile and efficient Thermal-Vaporization-Transformation (TVT) approach to prepare a highly active BP directly grown on carbon paper as the electrode for Oxygen evolution reaction (OER), showing a low onset potential of 1.45 V versus RHE. Simultaneously, the current density of BP-CP illustrates the excellent electro-catalysis stability only decreases by 3.4% after continuous operation for 10000 s. Meanwhile, the density functional theory (DFT) calculations further illustrates the P-doped carbon layer in the upper side of BP layer is actually responsible for its enhanced OER property, and the adjacent carbon atoms of the embedded P atoms are actually the active sites due to the induced local change distribution by intramolecular change transfer. Considering the facile, but efficient and scalable, TVT approach can directly synthesize BP-CP with excellent OER performance, which is promising for BP electrocatalysts used for OER in metal-air batteries, fuel cells, water-splitting devices, even other key renewable energy.     

Validation of qPCR method for enterococci quantification at Toronto beaches: Application for rapid recreational water monitoring

Rapid quantitative PCR-based methods for enterococci monitoring can allow public health authorities to make more timely beach posting decisions. However, qPCR methods must be assessed for proposed sites as locale-specific factors may affect DNA recovery or qPCR inhibition. We assessed the feasibility of the USEPA 1609.1 qPCR-based (Enterococcus) method at two urban Toronto beaches and three recreational areas at nearby river mouths in parallel with culture-based methods on the same water samples. A strong positive correlation was observed between the Enterococcus qPCR method and culturing-based quantification methods for E. coli and enterococci at both beaches and two river mouth areas. One river, known to be highly sewage-impacted, did not yield DNA suitable for qPCR analyses. qPCR results from biological replicates were strongly correlated and showed coefficients of variation as low as or lower than culture-based methods. With respect to Beach Action Value exceedances, the USEPA 1609.1 qPCR method provided an 80–90% level of agreement with E. coli enumeration results and >90% with enterococci enumeration. Results indicated that if recreational water locations and sampling conditions met the requirements of the USEPA 1609.1 qPCR method, the method can meet or exceed all quality control requirements and provide water quality results within 3.5 h for diverse recreational water settings around the City of Toronto.     

The dynamic effect of Micro-MHD convection on bubble grown at a horizontal microelectrode

Relatively low efficiency is the biggest obstacle to the popularization of water electrolysis, which is a particularly feasible way to produce super-pure hydrogen. Imposing a magnetic field can increase the hydrogen production efficiency of water electrolysis. However, the enhancement's detailed mechanism still lacks an insightful understanding of the bubbles' micro vicinity. Our recent work aims to understand why the micro-magnetohydrodynamic (MHD) convection hinders single bubbles' detachment on the microelectrode. A water electrolysis experiment by microelectrode is performed under an electrode-normal magnetic field, and dynamic analysis of the single bubble growing on microelectrodes is performed. The variation of bubble diameter with time in the presence or absence of the magnetic field was measured, and the forces acting on the bubble were quantified. The result shows that the micro-MHD convection, induced by Lorentz force, can give rise to a downward hydrodynamic pressure force that will not appear in large-scale MHD convection. This force can be of the same magnitude as the surface tension, so it dramatically hinders bubbles' detachment. Besides, the Kelvin force provides a new potential way for further improving the efficiency of water electrolysis.     

Evaluation of moisture reduction in aggregate base by wicking geotextile using soil column tests

This study investigated the distance effect on water reduction by the wicking geotextile in a base course experimentally using three sets of soil column tests. In each set of tests, two soil columns were constructed by compacting well-graded aggregate over a non-wicking woven geotextile and a wicking geotextile. A portion of the geotextile specimen was extended outside of the soil column for evaporation. The changes of the water contents in the soil column were monitored by volumetric water content sensors installed at various depths. The experimental results indicate the capillary drainage by the wicking geotextile effectively reduced water content within the soil column up to a distance from the wicking geotextile (i.e., approximately 200 mm for this specific aggregate with 10% fines). The test results also show that the wicking geotextile could reduce more water content of the aggregate below its optimum water content at a faster rate than the non-wicking geotextile.     

Realizing fragment spawning and fragment growth in the parallelized Discrete Element Method (DEM) during modelling of comminution

The particle based Discrete Element Method (DEM) can be applied to examine comminution processes. In this study, a DEM framework has been extended to model particle breakage without mass loss. After a breakage event occurs, spherical particles, as often considered in the DEM, are replaced by size reduced spherical fragments. During the following time steps, the fragments grow to their desired sizes, so that the mass loss can be counterbalanced. Previously defined overlaps with adjacent unbroken and broken particles (fragments) as well as walls are allowed. The breakage model has been realized in a parallelized DEM framework because comminution processes are often attributed to large numbers of particles and by parallelization the computational time can be reduced efficiently. An oedometer (one-dimensional compression in axial direction of a confined particle bed) has been modelled to investigate the parallelization efficiency and the influence of the permitted overlaps during the growth process on the growth duration. A simplified roller mill has been considered to examine the applicability of the breakage procedure considering parallelization. The results show that parallelization reduces computational time considerably. The breakage procedure is suitable to model comminution processes involving even densely packed particle systems and is superior to existing approaches.     

基于多尺度高斯核的分布式正则化回归学习算法

针对工业、信息等领域出现的基于较大规模、非平稳变化复杂数据的回归问题,已有算法在计算成本及拟合效果方面无法同时满足要求.因此,文中提出基于多尺度高斯核的分布式正则化回归学习算法.算法中的假设空间为多个具有不同尺度的高斯核生成的再生核Hilbert空间的和空间.考虑到整个数据集划分的不同互斥子集波动程度不同,建立不同组合系数核函数逼近模型.利用最小二乘正则化方法同时独立求解各逼近模型.最后,通过对所得的各个局部估计子加权合成得到整体逼近模型.在2个模拟数据集和4个真实数据集上的实验表明,文中算法既能保证较优的拟合性能,又能降低运行时间.     

Ontology-based approach for the provision of simulation knowledge acquired by Data and Text Mining processes

Numerical simulation techniques such as Finite Element Analyses are essential in today's engineering design practices. However, comprehensive knowledge is required for the setup of reliable simulations to verify strength and further product properties. Due to limited capacities, design-accompanying simulations are performed too rarely by experienced simulation engineers. Therefore, product models are not sufficiently verified or the simulations lead to wrong design decisions, if they are applied by less experienced users. This results in belated redesigns of already detailed product models and to highly cost- and time-intensive iterations in product development.Thus, in order to support less experienced simulation users in setting up reliable Finite Element Analyses, a novel ontology-based approach is presented. The knowledge management tools developed on the basis of this approach allow an automated acquisition and target-oriented provision of necessary simulation knowledge. This knowledge is acquired from existing simulation models and text-based documentations from previous product developments by Text and Data Mining. By offering support to less experienced simulation users, the presented approach may finally lead to a more efficient and extensive application of reliable FEA in product development.