Facile synthesis of black phosphorus directly grown on carbon paper as an efficient OER Electrocatalyst: Role of Interfacial charge transfer and induced local charge distribution

Black phosphorus (BP), as a new 2D material, is normally synthesized by a high-pressure and high-temperature (HPHT) method from white and red phosphorus, which severely hinders the further development of BP for any potential applications and leads to search for other potential applications of BP with big challenge. Herein, we develop a facile and efficient Thermal-Vaporization-Transformation (TVT) approach to prepare a highly active BP directly grown on carbon paper as the electrode for Oxygen evolution reaction (OER), showing a low onset potential of 1.45 V versus RHE. Simultaneously, the current density of BP-CP illustrates the excellent electro-catalysis stability only decreases by 3.4% after continuous operation for 10000 s. Meanwhile, the density functional theory (DFT) calculations further illustrates the P-doped carbon layer in the upper side of BP layer is actually responsible for its enhanced OER property, and the adjacent carbon atoms of the embedded P atoms are actually the active sites due to the induced local change distribution by intramolecular change transfer. Considering the facile, but efficient and scalable, TVT approach can directly synthesize BP-CP with excellent OER performance, which is promising for BP electrocatalysts used for OER in metal-air batteries, fuel cells, water-splitting devices, even other key renewable energy.     

Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under visible light

Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has not only caused secondary damage to the environment but also increased pathogen resistance to drugs,which further threatens public health.To address this issue,the use of non-chemical antibacterial means has become a new trend for environmental disinfection.In this study,we developed red phosphorus nanoparticles(RPNPs),a safe and degradable photosensitive material with good photocatalytic and photothermal properties.The red phosphorus nanoparticles were prepared using a template method and ultrasonication.Under the irradiation of simulated sunlight for 20 min,the RPNPs exhibited an efficiency of 99.98%in killing Staphylococcus aureus due to their excellent photocatalytic and photothermal abilities.Transmission electron microscopy and ultraviolet–visible spectroscopy revealed that the RPNPs exhibited degradability within eight weeks.Both the RPNPs and their degradation products were nontoxic to fibroblast cells.Therefore,such RPNPs are expected to be used as a new type of low-cost,efficient,degradable,biocompatible,and eco-friendly photosensitive material for environmental disinfection.     

Theoretical study on a kind of cyclization mechanism of boron trichloride and hexamethyldisilazane to form the borazine ring for SiBCN ceramics precursor

Borazine rings act as a pivotal part in siliconboroncarbonitride ceramics (SiBCN) for high-temperature stability and great resistance to crystallization. A detailed investigation of the ring formation mechanism will guide the design and synthesis of SiBCN to meet application requirements under extreme conditions. Boron trichloride (BCl₃) and hexamethyldisilazane (HN(SiMe₃)₂) are common raw materials for the synthesis of precursors for SiBCN. In this paper, quantum chemical calculation was used to study the cyclization reaction mechanism between BCl₃ and HN(SiMe₃)₂ to form trichloroborazine (TCBZ) at the MP2/6-31G (d,p) level of theory. We discussed the structure properties, reaction pathways, energy barriers, reaction rates, and other aspects in detail. The results show that BCl₃ and HN(SiMe₃)₂ alternately participate in the reaction process, accompanied by the release of trimethylchlorosilane (TMCS), and that the entire reaction shows an absolute advantage in terms of energy. In the Step by step reaction, lower reaction barriers are formed due to the introduction of BCl₃ with more heat released compared to that for the introduction of HN(SiMe₃)₂. The final single-molecule cyclization and TMCS elimination steps are found to be faster compared to all previous bimolecular reactions.     

Nb和时效时间对热轧中锰TRIP钢中P偏聚的影响

热轧态中锰TRIP钢首先经650 ℃退火2 h,随后在550 ℃进行等温时效热处理,采用场发射扫描电镜(FE-SEM)研究该钢中P的偏聚和时效析出行为的变化情况。结果表明,中锰TRIP钢中P在晶界的偏聚是一种非平衡偏聚现象,临界时间约为50 h,与理论计算结果48 h较为吻合。在局部偏聚区域内,C与P存在共偏聚的关系,即P偏聚量高的地方,C含量也高。而合金元素Nb具有抑制P偏聚的效果,在20~70 h时效时间内,可以相对降低6.57%~19.5%的最大P偏聚量。根据电子背散射衍射(EBSD)菊池线分析,P偏聚量低于2.28at%时,P为固溶状态,高于2.28at.%时,P为析出状态。     

Black phosphorus junctions and their electrical and optoelectronic applications

Black phosphorus(BP),an emerging two-dimensional material,is considered a promising candidate for next-genera-tion electronic and optoelectronic devices due to in-plane anisotropy,high mobility,and direct bandgap.However,BP devices face challenges due to their limited stability,photo-response speed,and detection range.To enhance BP with powerful electric-al and optical performance,the BP heterostructures can be created.In this review,the state-of-the-art heterostructures and their electrical and optoelectronic applications based on black phosphorus are discussed.Five parts introduce the perform-ance of BP-based devices,including black phosphorus sandwich structure by hBN with better stability and higher mobility,black phosphorus homojunction by dual-gate structure for optical applications,black phosphorus heterojunction with other 2D materials for faster photo-detection,black phosphorus heterojunction integration with 3D bulk material,and BP via As-doping tunable bandgap enabling photo-detection up to 8.2 μm.Finally,we discuss the challenges and prospects for BP electric-al and optical devices and applications.     

Synthesis and photocatalytic performance of MoS2/Polycrystalline black phosphorus heterojunction composite

As a promising catalyst for solar hydrogen production, black phosphorus (BP) has received widespread attention due to variable band gaps, high carrier mobility, and strong light absorption performance. Herein, we use MoS₂ as a cocatalyst to synthesize BP/MoS₂ catalyst with polycrystalline BP to improve photocatalytic performance under visible light irradiation. A small amount of MoS₂ can reduce the recombination of electron-hole pairs in the composite, increase carrier transport efficiency, and then improve photocatalytic performance. As expected, the 10/0.5 ratio of BP/MoS₂ catalyst exhibits the highest photocatalytic hydrogen evolution performance with a hydrogen evolution rate of 575.4 μmol h^?1 g^?1, which is 2.5 times of pure BP. Based on the results above, a simple method is provided to synthesize low-cost black phosphorus-based photocatalysts.     

钼蓝分光光度法联合测定铁矿石中磷和二氧化硅

以往铁矿石中磷和二氧化硅含量的测定需要分别采用钼蓝分光光度法。在使用磷钼蓝分光光度法时,常会因钒、砷等的干扰使得磷测定结果不准确,需要将样品再处理后才能测定。实验采用石墨垫底铁坩埚,碳酸钠和硼酸混合熔剂高温熔融铁矿石,使铁矿石样品分解彻底,再分别采用铋磷钼蓝和硅钼蓝分光光度法测定磷和二氧化硅含量,从而实现了采用钼蓝分光光度法联合测定铁矿石中磷和二氧化硅。干扰试验表明,在高温熔融时,石墨可将钒(V)还原为钒(III),使样品中钒不干扰磷的测定;显色液中加入15mg硫代硫酸钠溶液可将砷(V)还原为砷(III),继而消除砷对磷测定的干扰。磷的质量浓度在0~3μg/mL范围内遵守比尔定律,校准曲线的线性相关系数为0.9999,表观摩尔吸光系数为2.242×10⁴ L·mol^-1·cm^-1;二氧化硅的质量浓度在0~5μg/mL范围内遵守比尔定律,校准曲线的线性相关系数为0.9995,表观摩尔吸光系数为9.342×10³ L·mol^-1·cm^-1。方法中磷和二氧化硅的检出限分别为0.0026μg/mL和0.0081μg/mL。按照实验方法测定6个铁矿石标准样品中磷和二氧化硅,磷测定结果的相对标准偏差(n=8)小于5%,相对误差小于2%;二氧化硅测定结果的相对标准偏差(n=8)小于2%,相对误差小于1.5%。按照实验方法测定5个铁矿石样品中磷和二氧化硅,磷测定结果的相对标准偏差(RSD,n=8)小于7%,二氧化硅测定结果的相对标准偏差(n=8)小于1%;磷和二氧化硅的测定值均与电感耦合等离子体原子发射光谱法的测定值相一致。