Lactobacillus reuteri-fortified camel milk infant formula: Effects of encapsulation,in vitro digestion,and storage conditions on probiotic cell viability and physicochemical characteristics of infant formula

Lactobacillus reuteri fortified camel milk infant formula (CMIF) was produced. The effect of encapsulation in different matrices (sodium alginate and galacto-oligosaccharides) via spray drying, simulated infant gastrointestinal digestion (SIGID), and storage conditions (temperature and humidity) on the viability of L. reuteri in CMIF and the physicochemical properties of CMIF were evaluated. Compared with free cells, probiotic cell viability was significantly enhanced against SIGID conditions upon encapsulation. However, L. reuteri viability in CMIF decreased after 60 d of storage, predominantly at higher storage humidity and temperature levels. At the end of the storage period, significant changes in the color values were observed in all CMIF, with a reduction in their greenness, an increase in yellowness, and a wide variation in their whiteness. Moreover, pH values and caking behavior of all CMIF stored at higher temperature (40°C) and humidity [water activity (a_w) = 0.52] levels were found to be significantly higher than the samples stored under other conditions. Over 30 d of storage at lower humidity conditions (a_w = 0.11 and 0.33) and room temperature (25°C), no significant increase in CMIF lipid oxidation rates was noted. Fourier-transform infrared spectroscopy analysis showed that, compared with the other storage conditions, CMIF experienced fewer changes in functional groups when stored at a_w = 0.11. Microscopic images showed typical morphological characteristics of milk powder, with round to spherical-shaped particles. Overall, camel milk fortified with encapsulated L. reuteri can be suggested as a promising alternative in infant formula industries, potentially able to maintain its physicochemical characteristics as well as viability of probiotic cells when stored at low humidity levels (a_w = 0.11) and temperature (25°C), over 60 d of storage.     

Experimental research on combined effect of obstacle and local spraying water fog on hydrogen/air premixed explosion

In order to reveal the mechanism of water fog explosion suppression and research the combined effect of water fog and obstacle on hydrogen/air deflagration, multiple sets of experiments were set up. The results show that the instability of thermal diffusion under lean combustion conditions is the main influencing factor of hydrogen/air flame surface instability, and the existence of water fog will aggravate the hydrogen/air flame surface instability. When obstacle is not considered, 8 μm, 15 μm, 30 μm water fog can significantly reduce the flame velocity and explosion overpressure of hydrogen/air, 45 μm fine water fog plays the opposite role. When considering the relative position of the water fog release position and the obstacle, the 8 μm, 15 μm, 30 μm water fog has almost no suppression effect when released near the obstacle, but a significant suppression effect occur, when using the 45 μm water fog. In the field of theoretical research, the research results not only provide an experimental basis for the fine water fog to reduce the consequences of hydrogen explosion accidents, and the optimal diameter range used by the water fog, but also provide experimental reference for the numerical simulation of hydrogen/air explosion suppression in semi-open space, and promote the development of hydrogen explosion suppression theory. In terms of engineering applications, this study can provide a theoretical basis for the layout of fire fighting equipment in the engine room of nuclear power plants or hydrogen-powered ships.     

针对细微特征进行K-means聚类的电台分选识别技术

现代战场中的无线通信设备日益增多，精准获取个体信息已成为研究热点，但也是难点。针对通信电台，提出了一种分选识别技术。该技术从电台物理层特性出发，对其辐射信号的细微特征进行K-means聚类以实现分选，分选的同时提取各个个体的特征属性值，未知信号通过与特征属性值相关运算实现个体识别。该技术无需先验知识，无需训练运算，通过实验验证，其可行、高效，易于工程实现。     

The formed surface characteristics of SiCf/SiC composite in the nanosecond pulsed laser ablation

For the advantages of high-temperature resistance, corrosion resistance and ultra-high hardness, SiC_f/SiC composite is becoming a preferred material for manufacturing aero-engine parts. However, the anisotropy and heterogeneity bring great challenges to the processing technology. In this study, a nanosecond pulsed laser is applied to process SiC_f/SiC composite, where the influence of the scanning speed and laser scanning direction to the SiC fibers on the morphology of ablated grooves is investigated. The surface characteristics after ablation and the involved chemical reaction of SiC_f/SiC are explored. The results show that the increased laser scanning speed, accompanied by the decreasing spot overlap rate, leads to the less accumulation of energy on the material surface, so the ablation effect drops. In addition, for the anisotropy of the SiC_f/SiC material, the obtained surface characteristics are closely dependent on the laser scanning direction to the SiC fibers, resulting in different groove morphology. The element composition and phase analysis of the machined surface indicate that the main deposited product is SiO₂ and the carbon substance. The results can provide preliminary technical support for controlling the machining quality of ceramic matrix composites.     

Experimental and numerical investigations on the heat production and thermal storage characteristics of rapid preparation amorphous powder activated coke

The heat production and thermal storage characteristics of rapid-preparation amorphous powder activated coke (RAC) were investigated. RAC was prepared by using a drop-tube reactor system. The natural oxidation characteristics of RAC were studied through combined TG–FTIR analysis and temperature-programmed experiment. Experimental results showed that CO and CO₂ were the main oxidation products of RAC in air, and that the oxidation reaction was in accordance with the Arrhenius equation and law of mass action. Thermal storage characteristics were studied through computational fluid dynamics simulation. The maximum excess temperature θ_max increases linearly with the increase of the initial temperature. The concentration fields of the products show that CO₂ is mainly concentrated in the upper part of the coke bin, and the CO generated by CO₂ at high temperature is mainly concentrated in the central part of the coke bin.     

Multi-dimensional modeling of mixture preparation in a direct injection engine fueled with gaseous hydrogen

With the recent advances of direct injection (DI) technology, introducing hydrogen into the combustion chamber through DI is being considered as a viable approach to circumvent backfire and pre-ignition encountered in early generations of hydrogen engines. As part of a broader vision to develop a robust numerical model to study hydrogen spark ignition (SI) combustion in internal combustion (IC) engines, the present numerical investigation focuses on mixture preparation in a hydrogen DI SI engine. This study is carried out with a single hole injector with gaseous hydrogen injected at 100 bar injection pressure. Simulations are carried out for high and low tumble configurations and validated against optical data acquired from planar laser induced fluorescence (PLIF) measurements. Varying mesh configurations are investigated for the impact on in-cylinder mixture distribution. A particular emphasis is placed on the effect of nozzle geometry and mesh orientation near the wall. Overall, the computational model is found to predict the mixture distribution in the combustion cylinder reasonably well. The results showed that the alignment of mesh with the flow direction is important to achieve good agreement between numerical analysis and optical measurement data.     

Oxidative characteristics and gel properties of porcine myofibrillar proteins affected by l-lysine and l-histidine in a dose-dependent manner at a low and high salt concentration

This study investigated the effects of l -lysine (Lys) and l -histidine (His) on the oxidative characteristics and gel properties of porcine myofibrillar proteins (MP). Results showed that Lys and His had a strong ferrous ion-chelating ability and hydroxyl radical-scavenging activity. Moreover, Lys and His inhibited the protein carbonyl formation and MP aggregation at 0.2 M and 0.6 M NaCl, respectively, in a dose-dependent manner. Furthermore, 2 and 4 mg mL⁻¹ Lys and His decreased the oxidation-induced loss of the tertiary structure of MP accompanied by the lower surface hydrophobicity. The water-holding capacity and gel strength of MP gels increased with increasing Lys and His concentrations due to more regular and lamellar structures with smaller and homogeneous pores at 0.6 M NaCl and more orderly crosslinking via fibrous filament at 0.2 M NaCl. In summary, Lys and His chelated the ferrous ions and scavenged hydroxyl radicals, decreased the oxidation-induced physicochemical changes, thus preventing oxidative damage during the formation of a three-dimensional gel network, which resulted in better gel quality.     

注射模生产中智能化控制及应用

分析了注射模生产的现状，针对其生产中智能化调控应用方面的不足，提出模内参数的自适应调节方案，还介绍了自适应工作的原理、可调参数种类、逻辑推理等，并实际验证了基于注塑设备联网集成工艺数据下注射模成型工艺自适应调节的可行性。     

Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.