Nanolayer CrAlN/TiSiN coating designed for tribological applications

With the goal to produce a hard and tough coating intended for tribological applications, CrAlN/TiSiN nanolayer coating was prepared by alternative deposition of CrAlN and TiSiN layers. In the first part of the article, a detailed study of phase composition, microstructure, and layer structure of CrAlN/TiSiN coating is presented. In the second part, its mechanical properties, fracture and tribological behavior are compared to the nanocomposite TiSiN coating. An industrial magnetron sputtering unit was used for coating deposition. X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used for compositional and microstructural analysis. Mechanical properties and fracture behavior were studied by instrumented indentation and focused ion beam techniques. Tribological properties were evaluated by ball-on-disk test in a linear reciprocal mode. A complex layer structure was found in the nanolayer coating. The TiSiN layers were epitaxially stabilized inside the coating which led to formation of dislocations at interfaces, to introduction of disturbances in the coating growth, and as a result, to development of fine-grained columnar microstructure. Indentation load required for the onset of fracture was twice lower for the nanolayer CrAlN/TiSiN, compared to the nanocomposite TiSiN coating. This agrees very well with their mechanical properties, with H³/E² being twice higher for the TiSiN coating. However, the nanolayer coating experienced less severe damage, which had a strong impact on tribological behavior. A magnitude of order lower wear rate and four times lower steady state friction coefficient were found for the nanolayer coating.     

Assessment of technological attributes of autochthonous starter cultures in Turkish dry fermented sausage (sucuk)

The study aims to evaluate the technological properties of autochthonous strains (<i>Lactobacillus sakeii> S15, <i>Lactobacillus plantarumi> S24, <i>Li>. <i>plantarumi> S91, <i>Pediococcus pentosaceusi> S128b and <i>Staphylococcus carnosusi> G109) in Turkish dry fermented sausage (sucuk). After 24 h of fermentaPtion, all lactic acid bacteria strains reduced the pH to below 5.0, while the pH in the control group was above 5.3. The number of lactic acid bacteria strains reached 10⁸–10⁹ cfu g⁻¹ during fermentation. <i>Staphylococcus carnosusi> G109 remained at the inoculation level of 10⁶ cfu g⁻¹ during ripening. <i>Lactobacillus sakeii> S15 as mono-culture showed higher TBARS values compared to other strains. The control group had the lowest L* value and autochthonous strains caused no significant difference for a* value. According to principal component analysis results, most volatile compounds were positively correlated with the group containing only <i>L. sakeii> S15.     

Hydrogen storage performance of methyl-substituted mesoporous silica with tailored textural characteristics

Journal of Porous Materials - The present study reports a systematic analysis of morphology and hydrogen sorption capacity of mesoporous organic-inorganic silica prepared by varying the silica...     

On‐the‐Spot Immobilization of Quantum Dots,Graphene Oxide,and Proteins via Hydrophobins

Class I hydrophobin Vmh2, a peculiar surface active and versatile fungal protein, is known to self‐assemble into chemically stable amphiphilic films, to be able to change wettability of surfaces, and to strongly adsorb other proteins. Herein, a fast, highly homogeneous and efficient glass functionalization by spontaneous self‐assembling of Vmh2 at liquid–solid interfaces is achieved (in 2 min). The Vmh2‐coated glass slides are proven to immobilize not only proteins but also nanomaterials such as graphene oxide (GO) and quantum dots (QDs). As models, bovine serum albumin labeled with Alexa 555 fluorophore, anti‐immunoglobulin G antibodies, and cadmium telluride QDs are patterned in a microarray fashion in order to demonstrate functionality, reproducibility, and versatility of the proposed substrate. Additionally, a GO layer is effectively and homogeneously self‐assembled onto the studied functionalized surface. This approach offers a quick and simple alternative to immobilize nanomaterials and proteins, which is appealing for new bioanalytical and nanobioenabled applications.     

The effect of different pollutants exposure on the pigment content of pigmented macrophage aggregates in the spleen of Vardar chub (Squalius vardarensis Karaman, 1928)

Pigmented macrophage aggregates (MAs) are known to change under influence of various factors, such as aging, season, starvation, and/or pollution. In this study, changes in the pigment content of the MAs in the spleen of Vardar chub (<i>Squalius vardarensisi>, Karaman) (<i>ni> = 129) collected in spring and autumn, from three rivers with different pollution impact was examined: Zletovska River (metals), Kriva River (metals and municipal wastewater), and Bregalnica River (municipal wastewater). Collected data revealed increased relative volume and number of MAs containing hemosiderin under the influence of metals, significant in autumn (<i>pi> < .05). In chub exposed to metals combined with municipal wastewater, significant increase of lipochrome accumulation in MAs in autumn, melanin in MAs in fish captured in the spring season, and number of splenic MAs containing combination of melanin and lipochrome was noted. Volumes and number of MAs containing combination of hemosiderin and lipochrome increased in spleen of fish captured in autumn from both Zletovska River and Kriva River, most likely due to the contribution of hemosiderin and lipochrome, respectively. Values measured for the various pigments in splenic MAs in fish captured from Bregalnica River, were overall closer to the values measured for fish captured from Kriva River. Notably, melanin and lipochrome are more likely to be found in fish from waters influenced by municipal wastewater (organic pollution) and hemosiderin in fish spleen from water influenced by mining activity (heavy metals pollution).