Robust Control of Permanent Magnet Synchronous Motors

In this paper, permanent magnet synchronous motors (PMSMs) are investigated. According to the feature of PMSMs, a novel state equation of PMSMs is obtained by choosing suitable state variables. Based on the state equation, robust controllers are designed via interval matrix and PI control idea. In terms of bilinear matrix inequations, sufficient conditions for the existence of the robust controller are derived. In order to reduce the conservation and the dependence on parameter, the control inputs of PMSMs are divided into two parts, a feedforward control input and a feedback control input, and relevant sufficient conditions for the existence of the controller are obtained. Because of the suitable choice of state variables, the proposed control strategies can cope with the load uncertainty and have robustness for disturbance. Finally, simulations are carried out via Matlab/Simulink soft to verify the effectiveness of the proposed control strategies. The performance of the proposed control strategies are demonstrated by the simulation results.      

改性BMI微孔轴承保持器材料研究

采用改性双马来酰亚胺树脂制备微孔轴承保持器材料，探讨了制备工艺和最佳工艺参数，得到性能优良的改性双马来酰亚胺微孔轴在保持器材料。     

Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A

The curing kinetics of bismaleimide modified with diallylbisphenol A were investigated for different ratios of 1,1′‐(methylene di‐4,1‐phenylene) bismaleimide and diallylbisphenol A with differential scanning calorimetry. Multiheating‐rate and isothermal methods were used to study the kinetics of the curing process. The results indicated that the activation energy changed with the extent of conversion. The activation energy obtained by the multiheating‐rate method was higher than that obtained by the isothermal method. Two kinetic models (autocatalytic and nth‐order) were successfully used to model the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2229–2240, 2003     

负重有氧健美操对大学女生BMI和WHR影响的实验研究

为了更好地满足大学女生减脂、健美形体的锻炼目的,探讨更为行之有效的锻炼方法,将随机取样的大学女生分为具有可比性的两组进行教学实验.实验组进行负重有氧健美操练习,对照组按常规健美操课模式进行12周的有氧健美操练习.结果显示:实验组学生的BMI和WHR有更明显的改善,表明负重有氧健美操能更有效地起到健身减脂,健美形体的作用.     

真空辅助成型工艺(VARI)研究

VARI在低成本成型工艺中起着很重要的作用，本文将介绍它的特点、制造、性能以及在国内外的应用。     

Cure kinetics of T700/BMI prepreg used for advanced thermoset composite

A new isothermally based, cure kinetic model for the prepreg was presented using an industrially supplied prepreg rather than pure resin. The matrix resin was bismaleimide (BMI) resins, and the reinforcement was carbon fiber T700–12S. The BMI prepreg was measured from 170 to 220°C by isothermal DSC. The isothermal cure reaction heat increases with the increment of cure temperature. The DSC data were analyzed by the proposed nth‐order reaction model. An increase in reaction rate was observed at higher temperature in both neat and prepreg. After reaching the peak value, the reaction rate dropped off faster in prepreg, resulting in a lower average value of the ultimate heat of reaction. It was suggested the presence of carbon fiber had an effect on the cure kinetics as a heat sink. The carbon fibers imposed restrictions on the molecular mobility of the reactive species and did not change the cure mechanism. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2238–2241, 2005     

Modeling the curing kinetics for a modified bismaleimide resin using isothermal DSC

The kinetics of curing for a modified bismaleimide (BMI) resin was investigated to ascertain a suitable cure model for the material. The resin system used in this study was composed of 4,4′‐bismaleimidodiphenylmethane (BMIM) and 0,0′‐diallyl bisphenol A (DABPA, DABA). The BMIM was the base monomer and the DABPA was the modified agent. A series of isothermal DSC runs provided information about the kinetics of cure in the temperature range 170–220°C. Regardless of the different temperatures, the shape of the conversion curves was similar, and this modified BMI resin system underwent an nth‐order cure reaction. Kinetic parameters of this BMI resin system, including the reaction model, activation energy, and frequency factor, were calculated. From the experimental data, it was found that the cure kinetics of this resin system can be characterized by a first‐order kinetic model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3338–3342, 2004     

Acetyl‐capped paraformaldehyde as crosslinking agent for BMI‐modified novolac resin for resin transfer molding

Paraformaldehyde was end‐capped with acetyl groups and was applied as a crosslinking agent for a bismaleimide (BMI)‐modified novolac resin system. The processibility of the resin system containing 5 wt % crosslinking agent still met the need for resin transfer molding (RTM), whereas the thermomechanical properties of crosslinked resin improved significantly. The composites based on the resin system and woven glass fabric showed better flexural strength, modulus, and higher retention rates at 200 and 300°C than that based on a resin system without acetyl‐capped paraformaldehyde. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1265–1271, 2002     

基于观测器的不确定T-S模糊系统鲁棒镇定

为带有参数不确定性的T-S模糊控制系统提出了新的基于观测器的鲁棒输出镇定条件. 该条件用来设计模糊控制器和模糊观测器. 为了设计模糊控制器和模糊观测器, 用T-S模糊模型来表示非线性系统, 并运用平行分布补偿观念. 充分条件基于二次Lyapunov函数, 通过将模糊系统的鲁棒镇定条件表述为一系列矩阵不等式, 比以往文献中列出的条件具有更小的保守性. 该不等式为双线性矩阵不等式, 可分两步骤先后解得使T-S模糊系统镇定的控制器增益和观测器增益. 最后, 通过对一个具有不确定性的连续时间非线性系统控制的例子证明了提出方法比以往方法更宽松.     

偶联剂对CF／SiO2／BMI复合材料性能的影响

在氧化处理后的碳纤维（CF）表面涂敷不同的偶联剂，石英粉用KH－550和脱模剂处理，然后在双辊混炼机上与双马来酰亚胺（BMI）树脂熔融混炼，采用模压工艺制备CF／SiO2/BMI复合材料试样，对其弯曲强度和吸水率进行了测试，并且用电子光谱化学分析（ESCA）分析了氧化前后碳纤维表面的成分和官能团，讨论了碳纤维表面处理对复合材料弯曲强度的影响，结果表明，不同偶联剂对其弯曲强度均有较大的 影响。