疫情下电磁场理论课程的网络教学

本文主要总结了新冠疫情期间作者的电磁场理论课程在线教学经验。对比分析了录播和直播的优缺点后,选择录播教学方式。基于超星网络教学平台,展示了录播网络教学的具体措施,包括网上答疑和学习效果检查以及在线批改作业等。给出了网络教学可以为线下教学继续使用的方法和手段,为疫情结束后的正常教学提供了新的网络教学补充措施。     

Effects of multiple freeze–thaw cycles on meat quality,nutrients, water distribution and microstructure in bovine rumen smooth muscle

This study investigated the effect of 5 freeze–thaw cycles (freezing at −18°C for 12 h and then thawing at 4°C for approximately 12 h) on the meat quality, proximate composition, water distribution and microstructure of bovine rumen smooth muscle (BSM). As the number of freeze–thaw cycles increased, BSM pH, shear force, water content and protein content decreased by 3.06%, 35.50%, 14.49% and 21.11%, respectively, whereas BSM thawing loss, cooking loss, pressing loss, total aerobic count (TAC), ash content and fat content increased by 108.12%, 47.75%, 78.33%, 90.99%, 105% and 35.20%, respectively. The freeze–thaw cycles resulted in greater protein and lipid oxidation, as evidenced by a 36.46% reduction in the sulfhydryl content and a 209.06% and 338.46% increase in the carbonyl and malondialdehyde contents, respectively. Ice crystal formation disrupted the structural integrity of the muscle tissue. Low-field nuclear magnetic resonance results showed that the freeze–thaw cycles prolonged the relaxation times (T_2b, T₂₁ and T₂₂), indicating that immobile water shifted to free water, and consequently, free water mobility increased. After 3 freeze–thaw cycles, the decline in shear force slowed, the increase in thawing loss became accelerated, and the TAC approached the domain value (6 log colony-forming units/g). Therefore, the number of freeze–thaw cycles of smooth muscle during transport, storage and distribution should be controlled to 3 or fewer. The current results provide a theoretical basis and data support for the further utilisation and culinary processing of smooth muscle.     

Influence of fermentation with different lactic acid bacteria and in vitro digestion on the change of phenolic compounds in fermented kiwifruit pulps

The present study aimed to evaluate the effect of fermentation and gastrointestinal digestion of three kinds of fermented kiwifruit pulps with different Lactobacillus (Lactobacillus plantarum, Lactobacillus acidophilus and Lactobacillus casei). The changes in bioactive substances (total phenolic acid, total flavonoid, vitamin C and the viable count), antioxidant capacity (DPPH, ABTS, hydroxyl radical and superoxide anion radical scavenging activity) and phenolic profiles (protocatechuic acid, protocatechualdehyde, chlorogenic acid, caffeic acid and p-coumaric acid) were detected. The result showed, compared to non-fermented kiwifruit pulp, fermentation with LP and LA had higher content of TPA, TF and V_C, as well as antioxidant capacity. Fermentation with LP and the content of protocatechualdehyde, p-coumaric acid and chlorogenic acid were increased. However, after digestion, LP showed more effect in maintaining the content of antioxidants, antioxidant capacity and the viable count rather than LA. During digestion, the content of protocatechualdehyde and p-coumaric acid was increased in fermented samples compared with non-fermented samples. Overall, compared with LA and LC, LP is more suitable for the fermentation of kiwifruit pulp.     

Theoretical investigation of intrinsic point defects and the oxygen migration behavior in rare earth hafnates

In this work, the composition-dependent point defect types and formation energies of RE₂Hf₂O₇ (RE = La, Ce, Pr, Nd, Pm, Sm, Eu and Gd) as well as the oxygen diffusion behavior are systematically investigated by first-principles calculations. The possible defect reactions and dominant defect complexes under stoichiometric and non-stoichiometric conditions are revealed. It is found that O Frenkel pairs are the predominant defect in stoichiometric pyrochlore hafnates. Hf-RE cation anti-site defects, accompanied by RE vacancies and/or oxygen interstitials, are stable in the non-stoichiometric case of HfO₂ excess. On the other hand, RE-Hf anti-site defects together with oxygen vacancies and/or RE interstitials are preferable in the case of RE₂O₃ excess. The energy barriers for the migration along the V_O48f - V_O48f pathway of pyrochlore hafnates were calculated to be between 0.81 eV and 0.89 eV. Based on these results, a defect engineering strategy is proposed and the pyrochlore hafnates investigated here are predicted to exhibit potential oxygen ionic conductivity.     

Cf/C复合材料与纯铜的胶接辅助钎焊连接

采用胶接辅助钎焊方法,以TiH_2粉为活性元素源,环氧树脂为粘性载体,Ag-Cu共晶合金为钎料,Cu箔为应力缓冲层材料,实现了C_f/C复合材料与纯铜的钎焊连接,结果表明,接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物,其结构可表示为(C_f/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出,在930℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.     

Fermatean fuzzy linguistic set and its application in multicriteria decision making

In this paper, we propose the concept of Fermatean fuzzy linguistic term sets based on linguistic term sets and Fermatean fuzzy sets. The basic operational laws, the score function, and the accuracy function of Fermatean fuzzy linguistic numbers are provided. Then we propose the Fermatean fuzzy linguistic weighted aggregation operator, the Fermatean fuzzy linguistic weighted geometric operator, and the Fermatean fuzzy linguistic distance measures. Furthermore, we extend the TOPSIS method to the proposed distance measures, and the ranking of alternatives is obtained under a Fermatean fuzzy linguistic environment. An example is provided to illustrate the feasibility and effectiveness of the proposed method, and a comparison with the existing method is also analyzed. Finally, the sensitivity analysis of the parameter in the proposed distance measure is also discussed.     

Research on the machinability of A-plane sapphire under diamond wire sawing in different sawing directions

Due to its superior mechanical, optical and chemical properties, sapphire (α-Al₂O₃) is widely used in engineering, optics, medicine, and other scientific research fields. The atomic structure of sapphire gives rise to anisotropy in its mechanical properties, which affects the machinability of sapphire materials on different crystal planes. Different cutting directions will affect the wafer economy and surface quality achieved during wire sawing due to this anisotropy. In this study, the machinability of A-plane sapphire was investigated for diamond wire sawing in three different directions, following the C-plane, R-plane and M-plane. The results show that the direction following the M-plane could be the best direction for diamond wire sawing because this direction results in the minimal sawing forces, the lowest specific energy and the smallest volume of material that will need to be removed during subsequent processing. These characteristics correspond to the direction with the highest fracture strength since the material is removed by brittle machining. The force ratio for sawing in the direction of the R-plane is the smallest because this direction is associated with the minimum hardness and the lowest critical load for the transition from plastic to brittle removal of the workpiece material. The 3D height parameters show no obvious pattern among the three sawing directions. The mechanism of material removal is mainly brittle removal, with some plastic removal, and is obviously affected by the crystal orientation.     

基于MATLAB的GPS周跳探测与修复

在GPS观测过程中,信号会受到遮挡等原因发生跳变现象,引起很大误差甚至是粗差,为了解决这一问题,文中利用MATLAB软件,根据电离层残差法和Melbourne-Wübbena组合法的优缺点,结合这两种方法进行GPS载波相位观测值的周跳探测,然后根据周跳探测结果进行修复,结果表明:利用组合方法编制的MATLAB周跳探测与修复的程序能很好的探测和修复GPS周跳.