我国水-能源-粮食耦合关系及影响因素

为缓解我国水、能源和粮食资源紧张问题，促进资源可持续利用，构建水-能源-粮食系统，利用耦合协调度模型对我国的30个省（自治区、直辖市）进行测算,并利用空间杜宾模型分析主要影响因素。结果表明：2003—2017年，我国能源、粮食评价[JP]指数高于水资源评价指数，系统综合评价指数逐年递增；大部分省份耦合协调度处于初级协调水平且呈现逐年上升的态势，个别省份耦合协调度濒临失调；耦合协调度空间自相关性较强，虽有明显波动，但是呈现逐年加强的态势；影响耦合协调度的主要因素有从业人口数、固定资产投资额、人均生产总值、人口总数、[JP]文盲人口占比、工业污染排放、城镇化。     

磨料有序排布电镀砂轮的制备及其把持力研究

为解决电镀砂轮磨削加工中容屑空间不足的问题，采用点胶微粘接的方法制备了磨料有序排布的电镀砂轮，分析了磨料粘接效果和镀层力学性能。通过SEM分析了磨料/镀层/导电胶的结合界面，并进行了干磨削试验。研究结果表明，直径约为磨料粒径40%的胶点可粘接住磨料，单个胶点上粘接多颗磨料的占比小于6%；双脉冲电镀工艺制备的镀层显微硬度大于500HV，表层残余应力小于100MPa，磨料/镀层/导电胶之间的界面贴合紧密，无明显缺陷；砂轮在磨削时没有出现磨料脱落现象。     

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

In the family of inorganic nanomaterials, zirconia is a highly promising functional ceramic with a high refractive index, hardness, and dielectric constant, as well as excellent chemical inertness and thermal stability. These properties are enhanced in nano-zirconia ceramics, because nanopowders have a small particle size, good morphology, and uniform and dispersive distribution. In this study, a co-precipitation process was proposed to synthesise highly dispersed MgO–Y₂O₃ co-stabilized ZrO₂ nanopowders. The effects of different calcination temperatures on the crystallisation degree and particle dispersion of zirconia nanopowders were characterised by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption using the Brunauer–Emmett–Teller (BET) theory, transmission electron microscopy (TEM), and field emission scanning electron microscopy (FESEM). The optimum synthesis conditions were obtained as follows: 6 h of high-energy planetary grinding and calcination at 800 °C in an electric furnace. Under these optimum conditions, the average particle size of the prepared powder was 28.7 nm. This process enriches the literature on the controllable preparation of Mg–Y/ZrO₂ nanopowders obtained by the co-precipitation method.     

认同度修正下的近相邻改进推荐算法研究

如何融合多方因素准确地为用户提供个性化产品一直是关注的热点问题，由此，一个新的近相邻改进算法融入了大众化认同度和个性化认同度，利于更加高效地挖掘隐藏信息。实验结果表明，相对于传统近相邻算法，认同度修正算法虽然查全率小幅度上下波动，但其他多个评价指标都得到极大提升，假正率和深度有所减少，查准率、[F1]值和提升度得以增加，并且，受试者特征曲线和提升曲线也都说明此修正算法具有更为显著的推荐效果。     

洋葱蛋白及多肽的制备及其体外抗氧化活性评价

对洋葱蛋白、4种不同水解度的粗洋葱多肽、4种分子量范围的纯化多肽组分的水解度、分子量、氨基酸组成、DPPH·清除能力进行了研究。结果表明,洋葱蛋白酶解后分子量大幅降低,必需氨基酸组分和支链氨基酸组分均有所提高,DPPH·清除能力大幅提高,且与水解度成正比;在4种水解度的粗洋葱多肽的纯化组分中,P-III(分子量为1~5kDa)的DPPH·清除能力均为最强,这归功于其合适的分子量分布。该研究为洋葱的高值化利用提供了理论依据。     

Investigation of the influence of iron-containing abrasives on the corrosion behaviour of the aluminium alloy AlSi1.2Mg0.4

The corrosion resistance of aluminium surfaces is closely linked to the surface state after a grinding process. For years, iron-containing abrasive materials were suspected to lead to increased corrosion susceptibility after processing of aluminium surfaces. To prove a possible correlation between the iron content of an abrasive and the corrosion behaviour of aluminium components, scientific investigations and experimentally practical corrosion tests are necessary. For the current investigation, specimens of a technical Al-Si alloy from the same batch were used. The test specimens were mechanically ground with various resin-bonded model abrasives containing different iron contents. The performed corrosion tests did not reveal a negative influence of the different iron-containing abrasives on the corrosion behaviour of the Al–Si alloy. However, the most sensitive measuring method (electrochemical noise) showed differences in the surface activity depending on the type of abrasive.     

改型Wollaston棱镜干涉光谱仪的调制度研究

改型Wollaston棱镜(MWP)无需中继,可构建微型傅里叶变换光谱仪。回顾了MWP的基本原理,从调制度定义出发,计算得到准单色光源的复相干度,找到调制度的影响因素——扩展视场、剪切结构、焦面探测等。建立一般的干涉定域分析模型后,由像点逆光路追迹给出MWP的厚度计算公式,代入调制度约束参数得到不同参量的误差容限。通过FRED记录不同视场扩展情况的灰度与辐照度,结果显示,调制度为0.9时,视场与理论估算值1.24°基本相符;不同剪切量的灰度与辐照度变化特性表明,结构角会使定域垂直系统光轴的入射角发生变化,与晶轴倾角共同影响双折射率差;2.5和8μm像元探测采样表现出调制度差异,描述了定域深度或离焦的影响。以准单色光源、复相干度表示调制度,可将不同影响因素统一至约束参数中,相关变量误差容限可作为MWP-FTS的设计依据。     

Hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (αs1-, β- and k-casein) after enzymatic hydrolysis with pepsin and enzymatic extract from Pleurotus eryngii

The aim of this study was to estimate the hydrolytic degree and antioxidant activity of purified casein characterised by different haplotypes (α_s1-, β- and k-casein) after in vitro digestion with two different enzymatic systems: pepsin from porcine gastric mucosa (EP) and a crude enzymatic extract from the edible mushroom Pleurotus eryngii. The used enzymes showed a different mode of casein catalysis with a consequent production of peptides of different antioxidant activity. The CN haplotype significantly influenced peptides production; in fact, the amino acid substitutions caused by genetic polymorphisms at the α_s1-, β- and k-CN loci influenced the sites of enzymatic cleavage and therefore the produced peptides. The above is evidenced by the different antioxidant activity found in the hydrolysates depending on the used enzymatic system, the CN haplotype, and the CN haplotype × enzymatic treatment interaction. The findings of this study are a perspective for the production of specific foods that exert a biological effect in addition to the nutritional one.     

微结构模芯的精密磨削及其在微注塑成形中应用

针对微结构聚合物元器件的批量化生产与制造效率低等问题，采用精密修整成V形尖端的金刚石砂轮，在自润滑性和脱模性良好的钛硅碳陶瓷模芯表面加工制造出形状精度可控的V沟槽阵列结构，然后利用微注塑成形工艺将模芯表面的V沟槽阵列结构一次成形复制到聚合物表面，高效注塑成形制造出倒V形阵列结构的聚合物工件。分析了微模芯的表面加工质量与形状精度，研究了熔体温度、注射速度、保压压力、保压时间等微注塑成形工艺参数对微结构聚合物注塑成形角度偏差和填充率的影响。实验结果表明：通过微细磨削加工技术和微注塑成形工艺可以高效率、高精度地制造出规则整齐的微结构注塑工件，注射速度对微成形角度偏差的影响最大，保压压力对微成形填充率的影响最大，微结构模芯的微细磨削形状精度值为4.05 μm，微成形的最小角度偏差和最大填充率分别为1.47°和99.30%。