Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Effects of argon sintering atmosphere on luminescence characteristics of Ca6BaP4O17:Sm3+ phosphors

In this paper, Ca₆BaP₄O₁₇:Sm³⁺ and Li⁺ co-doped Ca₆BaP₄O₁₇:Sm³⁺ phosphors were synthesized in air and argon atmospheres using a solid-state reaction method. The phosphor morphologies and crystal structure were studied using scanning electron microscopy and X-ray diffraction, respectively. The emission and absorption characteristics were investigated using photoluminescence emission spectroscopy and diffuse reflectance spectroscopy. The surface states and composition of phosphor were investigated using X-ray photoelectron spectroscopy. The emission integrated intensities of the phosphors sintered in an argon atmosphere increased 3.5 fold than the ones sintered in air atmosphere, with Li⁺ ions becoming embedded in the lattice of the Ca₆BaP₄O₁₇:Sm³⁺ phosphor. This occurs because there are fewer defect/oxygen vacancies and less of the secondary phase forms, leading to better Sm³⁺ emission. The results suggest that sintering a mixture of the raw materials of a phosphor in an argon atmosphere is a good approach for synthesizing Ca₆BaP₄O₁₇:Sm³⁺ phosphor powders. The color purity and CIE values of an optimized phosphor sample sintered in an argon atmosphere with an Li⁺ ion compensator were calculated to be ~ 99.6% and (0.612,0.386) in the orange–red region under 405-nm excitation, respectively. Moreover, the solid solubility of Sm³⁺ ions in the Ca₆BaP₄O₁₇ host can be enhanced by using an argon atmosphere in the synthesis process.     

Development of Minimal Diguanosinyl Motif toward RNA G-Quadruplex-Like Structures in Solution

Among the non-canonical structures of B-DNA, the G-quadruplex is of particular interest because of its well-defined conformation, high stability, and versatility. Herein we report our studies on the development of an amide-linked minimal diguanosinyl motif that forms a G-quadruplex-like structure in solution in the presence of potassium cations; various linear guanosine amino acid dimers were synthesized with linkers of different chain lengths to investigate the optimum flexibility required to form such structures.     

等离子体改性海绵铁活化过硫酸盐处理含酚废水

采用低温等离子体技术对海绵铁表面进行改性，并将其用于活化过硫酸盐（PS）处理含酚废水。通过氮气等温吸附（BET）、X射线衍射（XRD）和扫描电子显微镜（SEM）等手段对改性前后的海绵铁进行表征分析。以苯酚为目标污染物，通过静态实验考察催化剂投加量、催化剂/PS摩尔比、pH和苯酚初始浓度对等离子体改性海绵铁活化PS处理含酚废水的影响。结果表明，改性后的海绵铁比表面积、孔容及孔径均有增大，活化PS能力显著提高；在最佳反应条件（等离子改性海绵铁的投加量为0.4g/L，催化剂/PS摩尔比为1∶15，溶液pH为2，苯酚的初始浓度为250mg/L）下，苯酚的去除率可达95%；反应过程符合二级反应动力学，主要是硫酸根自由基和羟基自由基起氧化作用。等离子体技术改性海绵铁活化过硫酸钠可有效去除水中苯酚，为实际含酚废水的处理提供一些思路。     

改型Wollaston棱镜干涉光谱仪的调制度研究

改型Wollaston棱镜(MWP)无需中继,可构建微型傅里叶变换光谱仪。回顾了MWP的基本原理,从调制度定义出发,计算得到准单色光源的复相干度,找到调制度的影响因素——扩展视场、剪切结构、焦面探测等。建立一般的干涉定域分析模型后,由像点逆光路追迹给出MWP的厚度计算公式,代入调制度约束参数得到不同参量的误差容限。通过FRED记录不同视场扩展情况的灰度与辐照度,结果显示,调制度为0.9时,视场与理论估算值1.24°基本相符;不同剪切量的灰度与辐照度变化特性表明,结构角会使定域垂直系统光轴的入射角发生变化,与晶轴倾角共同影响双折射率差;2.5和8μm像元探测采样表现出调制度差异,描述了定域深度或离焦的影响。以准单色光源、复相干度表示调制度,可将不同影响因素统一至约束参数中,相关变量误差容限可作为MWP-FTS的设计依据。     

新加坡食品较健康选择标志系统经验启示

文章介绍了新加坡较健康选择标志系统基本情况,从规格与使用要求、申请程序、适用范围等进行阐述,指出新加坡作为第一个实施食品FOP标签系统的亚洲国家,其经验做法对中国乃至多数亚洲国家有重要借鉴意义,中国FOP标签系统应具有充分的依据,严格规范申请和使用行为并适度扩大应用范围。     

基于修正幂律模型流体的柳叶形扶正器旋流规律及应用

为提高注水泥过程中水泥浆顶替效率，国内外愈来愈多地使用旋流扶正器。但是，目前旋流扶正器结构参数主要靠经验设计，缺乏理论基础也没有相关行业标准。针对依据文丘里效应设计的柳叶形旋流扶正器，基于修正幂律流体模型，构建了旋流扶正器旋流长度计算模型。通过数值模拟对旋流扶正器井下旋流规律进行研究，推导出了旋流扶正器在修正幂律流体条件下，周向平均速度和完全顶替的临界速度公式。基于旋流扶正器井下旋流规律，分析了井眼环空结构、流体性能、井下井壁附着力对水泥浆顶替效率的影响，优化了柳叶形旋流扶正器旋流角、扶正棱长度、扶正棱有效体积和扶正器高度等设计参数。对比分析了柳叶形与常规旋流扶正器在不同工况下的旋流长度，柳叶形扶正器的旋流长度比常规扇形平均提升了32%，比常规梯形扶正器平均提升了47%。柳叶形扶正器在新疆顺北油田顺北3井等20多井次超深井应用，应用井固井质量明显优于常规扇形的旋流扶正器。