Detection of fresh palm oil adulteration with recycled cooking oil using fatty acid composition and FTIR spectral analysis

There is a growing concern over the food safety issue related to increased incidence of cooking oil adulteration with recycled cooking oil (RCO). The objective of this study was to detect fresh palm olein (FPO) adulteration with RCO using fatty acid composition (FAC) and Fourier-transform infrared spectroscopy (FTIR) spectral analyses combined with chemometrics. RCO prepared in the laboratory was mixed with FPO in the proportion ranged from 1% to 50% (v/v) to obtain the adulterated oil samples (AO). FACs for FPO, RCO, and AO were determined using gas chromatography equipped with a flame ionization detector (GC-FID). The compositions of most fatty acids in RCO lied within the normal ranges of Codex standard, except for C8:0, C10:0, C11:0, C15:0, trans C18:1, and polyunsaturated fatty acids (PUFAs), C20:5. PUFAs showed a consistent decreasing trend with increasing magnitude of change with respect to increasing adulteration level and thus might be a good indicator for detecting FPO adulteration with RCO. The evaluation parameters (coefficient of determination, root mean standard error) of the FTIR-partial least square (PLS) model of palm oil adulteration with recycled oil are R² = 0.995 and 3.25, respectively. For FTIR spectral analysis, the distinct variations in spectral regions and aberrations in characteristic bands between FPO and RCO were observed. The optimized PLS calibration model developed from normal spectral of the combined region at 3602–3398, 3016–2642, and 1845–650 cm^?1 overpredict the adulteration level. On the other hand, the discriminant analysis classification model was able to classify the FPO and AO into two distinct groups. Improvement of the principles of combined techniques in authenticating AO from fresh oil is beneficial as a guideline to detect adulteration in cooking oil.     

Identification of Proteins Modulated in the Date Palm Stem Infested with Red Palm Weevil (Rhynchophorus ferrugineus Oliv.) Using Two Dimensional Differential Gel Electrophoresis and Mass Spectrometry

A state of the art proteomic methodology using Matrix Assisted Laser Desorption/Ionization-Time of Flight (MALDI TOF) has been employed to characterize peptides modulated in the date palm stem subsequent to infestation with red palm weevil (RPW). Our analyses revealed 32 differentially expressed peptides associated with RPW infestation in date palm stem. To identify RPW infestation associated peptides (I), artificially wounded plants (W) were used as additional control beside uninfested plants, a conventional control (C). A constant unique pattern of differential expression in infested (I), wounded (W) stem samples compared to control (C) was observed. The upregulated proteins showed relative fold intensity in order of I > W and downregulated spots trend as W > I, a quite interesting pattern. This study also reveals that artificially wounding of date palm stem affects almost the same proteins as infestation; however, relative intensity is quite lower than in infested samples both in up and downregulated spots. All 32 differentially expressed spots were subjected to MALDI-TOF analysis for their identification and we were able to match 21 proteins in the already existing databases. Relatively significant modulated expression pattern of a number of peptides in infested plants predicts the possibility of developing a quick and reliable molecular methodology for detecting plants infested with date palm.     

基于自适应融合的手掌静脉增强方法

针对掌脉轮廓不清晰，图像对比度低、亮度低，进而导致识别性能降低的现象，提出一种自适应融合的手掌静脉增强方法。首先，基于暗原色先验（DCP）去雾算法，根据掌脉图像变异系数自适应选择去雾系数，得到DCP增强图像，并且基于部分子块重叠直方图均衡（POSHE）算法得到POSHE增强图像；然后，将图像分为16个子块，依据图像灰度均值与标准差确定各子块权重；最后，根据各子块权重对DCP和POSHE增强图像进行自适应融合，得到最终增强图像。该方法既保留了DCP算法在增强图像对比度和亮度的同时不引入明显噪声的优点，又保留了POSHE算法在增强图像对比度和亮度的同时不损失局部细节的特点；同时，两者的自适应融合既解决了DCP图像阴影部分掌脉缺失现象，又削弱了POSHE产生的块效应。在对两个公开库和自建库分别进行的实验中，三个数据库的等错误率分别为0.0004、0.0472、0.0579，识别率分别为99.98%、94.27%、92.05%。实验结果表明，与现有的图像增强方法相比，该方法降低了等错误率，提高了识别精度。     

Solvent fractionation of hard palm stearin to increase the concentration of tripalmitoylglycerol and dipalmitoyl-stearoyl-glycerol as substrates for synthesis of human milk fat substitute

This research aimed to produce triacylglycerols fraction rich in palmitic acid (PA) at the sn-2 position from hard palm stearin (HPS) through acetone fractionation. Fractionations were done at HPS-to-acetone ratios of 1:3, 1:5 and 1:7 (w/v) and at temperatures of 25, 30 and 35 °C for 3 h. Triacylglycerols with PA at the sn-2 position, such as tripalmitoylglycerol (PPP) and dipalmitoyl-stearoyl-glycerol (PPS), were concentrated in the solid fraction, obtained after separation by filtration. The optimal fractionation conditions were at a HPS-to-acetone ratio of 1:5 (w/v) and 30 °C. The total PPP and PPS content was more than 91%, with a corresponding yield of more than 59%. Triacylglycerols obtained were composed of more than 91% PA in which 88% were at the sn-2 position. Conclusively, the solvent fractionation is a suited alternative method for the preparation of triacylglycerols used for the enzymatic synthesis of 1,3-dioleoyl-2-palmitoylglycerol which is the main triacylglycerol for human milk fat substitute.     

Nitrogen-doping microporous adsorbents prepared from palm kernel with excellent CO2 capture property

In post-combustion CO₂ capture, waste biomass is a favourable precursor to prepare porous carbons due to its low cost, renewability, and unique microstructures. This study presents a facile method for preparing N-doping porous carbons. Palm kernel shell was selected as carbon precursor, and its inherent silica species acted as a natural template to form hierarchical pores. The obtained samples exhibit predominant characteristics with highly developed micropores and a high N content providing an important contribution to CO₂ adsorption capacity, which can reach up to 5.29 and 2.30 mmol/g under 100 kPa at 25 and 60 °C, respectively. Moreover, the resultant porous carbons also exhibit excellent cycling stability after 20 cycles. Furthermore, the activation mechanism was investigated by the quantitative thermogravimetry-mass spectrometry (TG-MS) method.     

Experimental determination of elastic modulus of elasticity and Poisson’s coefficient of date palm tree fiber

The present study is an attempt to valorize local vegetable fibers by evaluating thire effectiveness as a new composite biomaterial. Our aim was to determine the mechanical characteristics, namely the elastic modulus and Poisson’s coefficient, of a fiber, locally called “Lif,” that is a natural material extracted from different date palm tree varieties in Biskra, a region situated in southeastern Algeria. This study compares the mechanical characteristcs of the Lif date palm tree fiber with other synthetic and plant fibers studied previously.     

Integrated supercritical fluid extraction and subcritical water hydrolysis for the recovery of bioactive compounds from pressed palm fiber

Pressed palm fiber (PPF), a residue obtained from palm oil industry, is a source of bioactive compounds, such as carotenoids, which are used as food additives. It also has cellulose and hemicellulose that can be used to yield fermentable sugars for the production of second generation ethanol. Supercritical fluid extraction (SFE) of pressed palm fiber provides an oil rich in carotenoids while subcritical water hydrolysis (SubWH) produces hydrolysates with high amounts of fermentable sugars. In this work, the effects of pressure (15–30 MPa) and temperature (318 and 328 K) on SFE of carotenoids were investigated. The SFE extract with highest carotenoid content was obtained at 318 K and 15 MPa (2.3% d.b., 0.81 mg β-carotene/g extract). After the extraction, the influence of process temperature (423–633 K), pressure (15 and 25 MPa), solvent:feed ratio (120 and 240), and residence time (1.25–5 min) on SubWH of the extraction residue was studied. At the temperature of 523 K, the highest total reducing sugar yield (11–23 g glucose/100 g carbohydrate) and the highest biomass conversion (40–97%) were obtained for any pressure and solvent:feed ratio. The highest selectivity for saccharide formation was found at 423 K (20–59 mol glucose/mol furfural equivalent). Optimal conditions for high saccharide formation and low sugar degradation product in subcritical hydrolysis were obtained at 523 K, 15 MPa, solvent:feed ratio of 120, residence time of 2.5 min with a total reducing sugar yield of 22.9 g glucose/100 g carbohydrate and a conversion of 84.9%.     

Analysis of pre-heated crude palm oil,palm oil methyl ester and its blends as fuel in a diesel engine

Diesel engines are widely used in the surface transport system. They are the main source of economic growth of a nation. Nowadays, awareness of the environment compels people to adopt stringent emission norms. The rapid depletion of fossil fuels and the increase in the emission levels have caused concerns globally. An eco-friendly alternate is required to fulfil the growing demand. This paper focuses on alternate fuels and the importance of choosing palm oil. The energy density and higher cetane number are its major advantages. Also it reduces environmental pollution drastically. The viscosity of palm oil is a problem like other vegetable oils, which affects the fuel spray pattern. It reduces the efficiency of the combustion to a large extent. To overcome the problem, the pre-heating technique and transesterification process are adopted in this work. Performance tests were conducted on a single cylinder, four-stroke, direct injection diesel engine coupled with eddy current dynamometer, and emission was monitored using an AVL exhaust gas analyser. The results indicated that vegetable oil fuels have lower brake thermal efficiency compared to that of diesel. Pre-heated oil and methyl ester showed an appreciable reduction in hydrocarbon (HC) and carbon monoxide (CO) emissions and higher exhaust temperature and nitric oxide (NO_x) emission.