Nitrogen Removal Performance of Denitrifying Ammonium Oxidation System in Treating Sulfamethoxazole-laden Secondary Wastewater Effluent

In this study,nitrogen removal performance of the denitrifying ammonium oxidation(DAO)process was investigated when treating sulfamethoxazole(SMX)-laden secondary wastewater effluent.The influent SMX concentration showed negligible effect on efficiencies for removal of nitrate and COD.However,the ammonium ions removal rate was moderately reduced,when the influent SMX concentration in wastewater reached 6 mg/L.Total nitrogen removal efficiency remained as high as 76.77%towards the day 158 at the end of experiment.Candidatus_Brocadia and Candidatus_Kuenenia were the functional anammox strains.The unclassified_f__Rhodobacteraceae sp.was predominant heterotrophic denitrifying strain in the studied reactor.The concentrations of soluble extracellular polymeric substances in sludge obviously increased from 16.76 mg/g VSS to 32.31 mg/g VSS,which might protect the nitrogen removal strains from high-concentration SMX.This result provides a theoretical and technical foundation for the application of denitrifying ammonium oxidation process in treating sulfamethoxazole-laden secondary wastewater effluent.     

碳酸性侵蚀与AAR作用下纳米混凝土的耐久性

地铁混凝土处于地下空间,容易受到地下水的碳酸性侵蚀；碱集料反应 (AAR)是一种严重的混凝土耐久性问题,既难以发现又难以修补,由两者共同作用引起的混凝土耐久性降低严重影响地铁隧道的正常使用.为研究纳米材料对地铁混凝土在碳酸性侵蚀和AAR共同作用下耐久性的影响,在普通混凝土中掺入适量纳米SiO₂和纳米Fe₂O₃,利用自行研制的碳酸性侵蚀试验箱进行试验,采用碳酸性侵蚀深度、膨胀率和声速作为测试指标来评价纳米混凝土在碳酸性侵蚀和AAR共同作用下的耐久性.试验结果表明:掺入纳米颗粒后,混凝土的膨胀率和侵蚀深度有了明显降低,而声速有了明显提升,说明纳米混凝土的耐久性优于普通混凝土；在182 d龄期时,掺量为2%的纳米SiO₂混凝土耐久性改善最明显,侵蚀深度和膨胀率最小,声速最大且声速下降幅度最小；其次是掺量为1%的纳米Fe₂O₃混凝土.由于纳米颗粒特殊的物理化学性质,改善了混凝土内部的微观结构和孔溶液的化学组成,使碳酸性侵蚀和碱集料反应共同作用下混凝土的耐久性得到了提高.     

Chemoenzymatic Total Synthesis of Sorbicatechol Structural Analogues and Evaluation of Their Antiviral Potential

Sorbicillinoids are fungal polyketides characterized by highly complex and diverse molecular structures, with considerable stereochemical intricacy combined with a high degree of oxygenation. Many sorbicillinoids possess promising biological activities. An interesting member of this natural product family is sorbicatechol A, which is reported to have antiviral activity, particularly against influenza A virus (H1N1). Through a straightforward, one-pot chemoenzymatic approach with recently developed oxidoreductase SorbC, the characteristic bicyclo[2.2.2]octane core of sorbicatechol is structurally diversified by variation of its natural 2-methoxyphenol substituent. This facilitates the preparation of a focused library of structural analogues bearing substituted aromatic systems, alkanes, heterocycles, and ethers. Fast access to this structural diversity provides an opportunity to explore the antiviral potential of the sorbicatechol family.     

碱铝硅酸盐玻璃化学强化关键影响因素概述

化学强化是一种玻璃机械强度增强方法,适用于异型、超薄、高碱、高膨胀玻璃增强,因新型超薄显示产品的屏幕保护玻璃发展需要,化学强化技术重新在碱铝硅酸盐玻璃品种掀起研究热潮。本文对化学强化本质及铝硅酸盐玻璃在屏幕保护玻璃应用进行了回顾,基于玻璃化学强化的高CS、DOL和低CT诉求,归纳总结了关键影响因素,第1,碱铝硅酸盐玻璃的成分及结构是基础,氧化铝有利玻璃网络孔隙增大创造交换通道,氧化钠或氧化锂是离子交换关键物质;第2,对于玻璃组成和结构设计,要求玻璃网络键合度R=O/Si或O/(Si+Al)满足2.15~2.40,碱金属氧化物质量分数大于13%且膨胀系数大于6×10^-6/℃;第3,在化学强化工艺方面,化学强化温度决定离子扩散系数,化学强化时间决定DOL,一步法仅能获得相对较大的CS,而DOL不很理想,只有两种离子参与交换的二步法才有利于CS和DOL同步提高。     

一种基于全变分技术和Lp伪范数的椒盐噪声去除方法

针对传统各向同性全变分（Isotropy total variation，ITV）去噪算法容易导致图像边缘模糊、不易保持图像细节信息等问题，提出一种基于L _p 伪范数和各向同性全变分的图像去噪方法。该方法将L _p 伪范数代替ITV模型中的L ₁范数，利用交替方向乘子算法（Alternating direction method of multipliers, ADMM）将能量泛函拆解成若干个子问题，并将差分算子视为卷积算子；然后引入卷积定理和快速傅里叶变换(Fast Fourier transform, FFT)提高算法运算效率；最后通过Matlab进行仿真实验，运用图像质量的客观和主观评价方法进行评价分析。结果表明，本文方法能够较好地保留图像的边缘特性，有效提升去噪效果。     

航空发动机进气总温传感器测温误差研究

航空发动机进口总温测量的准确性是优化发动机控制率、保障发动机飞行安全的关键因素之一。针对影响传感器测量准确性的响应时间、恢复系数，通过空气动力学和热力学理论，分析出具体的影响因素，设计了多种结构模型，并通过热风洞试验、FloEFD软件建模和热流体仿真，从材料及结构上系统地提出了优化途径和改善办法并进行了验证，尤其是分析了双余度传感器的响应一致性误差并提出改善方法。研究结果为同类传感器的设计提供了参考和借鉴。     

伞帽用高铬铸铁在热强碱腐蚀环境下的磨损分析

针对氧化铝行业中常用的Cr28和Cr20高铬铸铁伞帽在相同工况条件下的磨损机理进行分析,并对比研究了实际生产中两种失效材料的成分、组织及性能。结果表明,伞帽部件在高温强碱腐蚀条件下受到外界冲刷时,磨损量由微切削磨损与变形磨损这两种机制共同决定。含铬量较高的Cr28高铬铸铁,其冲刷和抗腐蚀磨损性能均优于Cr20高铬铸铁。伞帽服役寿命主要受浆料和表层的铸铁材料两大因素影响。两种试验材料经淬火+回火处理后,基体组织中主要为回火马氏体+M₇C₃型碳化物+少量残留奥氏体,其中含铬量较高的Cr28高铬铸铁中共晶碳化物含量更高,且分布更加弥散,其平均硬度值为64.0 HRC,高于Cr20高铬铸铁的60.2 HRC。最终确定Cr28高铬铸铁作为伞帽材质更能满足氧化铝生产及设备检修周期的需要。     

一种新型细旦帘子布的生产工艺研究

对新型细旦浸胶帘子布进行试生产。在试生产过程中，针对其高经密、高总经根数的特点，增加了整经工序，并在此基础上，对整经工艺、织造工艺及浸胶工艺进行探索，确定了该新型细旦浸胶帘子布的工艺参数。从试验结果来看，此次试生产达到了预期目标，并初步验证了在帘子布织造行业使用整经工序来开发生产高端细旦产品的优势，为开发高经密、高总经根数产品积累了初步经验。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

The influence of brewing method on bioactive compounds residues in spent coffee grounds of different roasting degree and geographical origin

The content of bioactive compounds in spent coffee grounds (SGC) was studied. SGC were obtained from Coffea arabica beans of different roasting degrees (light and dark) and different geographical origins (Nicaragua, Columbia and Mexico) processed using four brewing methods (mocha, filtered, drip and infusion). The highest caffeine and chlorogenic acid contents were determined in filtered spent coffee extracts. All extracts of light roasted spent coffee grounds showed lower browning index levels in comparison to that from dark roasted spent coffee grounds. Generally, the highest content of total polyphenolic compounds and highest antioxidant capacity were determined in extracts prepared in drip. In conclusion, the results obtained in this study indicate that the spent coffee grounds produced of domestic levels, especially those obtained from filter coffeemaker, could be considered as a good source of natural antioxidants.