Dufour and Soret influence on MHD boundary layer flow of a Maxwell fluid over a stretching sheet with nanoparticles

An analysis has been carried out to examine the heat and mass transfer properties of a two-dimensional incompressible electrically conducting Maxwell fluid over a stretching sheet in the existence of Soret, Dufour, and nanoparticles. In many practical scenarios, such as the polymer extrusion process, the problem presented here is crucial. The flow is examined in terms of the impacts of magnetohydrodynamics and elasticity. Brownian motion and thermophoresis are incorporated into the transport equations. Using adequate similarity variables, the governing partial differential equations and related boundary conditions are non-dimensionalized. The fourth–fifth-order Runge–Kutta–Fehlberg procedure is utilized to solve the consequent transformed ordinary differential equations. The effects of various embedded thermo-physical parameters on the fluid velocity, temperature, concentration, Nusselt number, and Sherwood number have been determined and discussed quantitatively. A comparison of a special case of our results with the one previously reported in the literature shows a very good agreement. An increase in the values of Du and Sr leads to an increase in the temperature and concentration distribution. Nusselt number estimates decrease as Nb estimations increase. Furthermore, this study leads to the study of different flows of electrically conducting fluid over a stretching sheet problem that includes the two-dimensional nonlinear boundary equations.     

A numerical model to predict the powder–binder separation during micro-powder injection molding

The micro-powder injection molding (micro-PIM) process has the potential to bridge the gap between the design and manufacturing of micro-components that are often used in small and handy devices. Numerical modeling helps to analyze and overcome various difficulties of micro-PIM. In the present work, a numerical model is developed to predict the powder–binder separation (a common defect in PIM and especially severe in micro-PIM) during the injection of an alumina feedstock. A powder–binder separation criterion is proposed dealing with applied injection pressure and friction force between the powder and binder. An indirect comparison of feedstock travel time between two locations is used to validate the model. The predicted segregation from the simulated result is supported by a qualitative experimental measurement. The developed model can be used to optimize injection parameters to get a defect-free product.     

“半翻转”教学模式下评价指标体系研究与实践

研究基于“半翻转”教学模式的线上教学评价指标体系,包括课前活动开展、课中教学活动设计、课后任务以及基于此过程中的评价指标体系设计。最后通过层次分析法设计评价指标权重,设计评价算法得到动态评价结果。该评价指标体系应用在本专业“数据结构与算法”课程中,并得到良好的应用效果。     

Memory-based dynamic event-triggered control for networked interval type-2 fuzzy systems subject to DoS attacks

In this article, the memory-based dynamic event-triggered controller design issue is investigated for networked interval type-2 (IT2) fuzzy systems under non-periodic denial-of-service (DoS) attacks. For saving limited network bandwidth, a novel memory-based dynamic event-triggered mechanism (DETM) is proposed to schedule data communication. Unlike existing event-triggered generators, the developed memory-based DETM can utilize a series of newly released signals and further save network resources by introducing interval dynamic variables. Moreover, to improve design flexibility, an IT2 fuzzy controller with freely selectable fuzzy rule number and premise membership functions (MFs) is synthesized. Then, a new switched time-delay system with imperfectly matched MFs is established under the consideration of memory-based DETM and DoS attacks simultaneously. Besides, based on the property of MFs, the boundary information of membership grades and slack matrices are introduced in the stability analysis. Furthermore, by using a piecewise Lyapunov–Krasovskii method, membership-functions-dependent criteria are deduced to ensure the asymptotic stability of built fuzzy switched systems. Finally, the effectiveness of proposed control strategies is demonstrated by simulation examples.     

一种用于电气设备状态监测的新式FBG传感器北大核心CSCD

为了监测绕组变压器的静态应力场和发生短路等故障时的动态应力变化,设计了一种用于电气设备状态监测的新式FBG传感器。该传感器由聚醚醚酮材料封装的FBG构成,通过内部圆锥形空腔结构实现将轴向应力集中于FBG敏感位置。通过仿真对不同压力强度下传感器结构的应力场部分及形变趋势进行了计算与分析,论证了设计的合理性。实验分别对静态载荷和动态冲击进行测试,结果显示,在静态压载测试中,当100 N相似文献   

A numerical study of dynamic behaviors of a unitized regenerative fuel cell during gas purging

The gas purging states affect electricity output and energy storage capacity of unitized regenerative fuel cells. In this study, a model of unitized regenerative fuel cell is established. Cell voltages and operating temperatures influences on the dynamic distribution of thermal fluid during purging process and the discharge of residual liquid water in electrolytic cell mode are investigated. The motivation of the present study is better understanding the gas purging characteristics and its effect on reaction behaviors of unitized regenerative fuel cells. Simulation results reveal a significant influence of purging gas temperature on the water flooding and a great effect of operating voltage on the water diffusion. The operating temperature of electrolytic cell model almost has little effect on purging results at different cell temperature and the same purging gas temperature. When the purging gas temperature is changed, higher temperatures of cell and purging gas facilitate liquid water discharging out from the cell regions. In cell water flooding situation, when having large liquid content, the purging gas has little effects on the water expelling process.     

Analytical approach on magnetohydrodynamic Casson fluid flow past a stretching sheet via Adomian decomposition method

Flow phenomena of three-dimensional conducting Casson fluid through a stretching sheet are proposed in the present investigation with the impact of the magnetic parameter in a permeable medium. The adaptation of particular transformations is useful to modify the governing equations into their nondimensional as well as the ordinary form. However, these transformed equations are nonlinear and approximate analytical methods for the solution of the complex form of governing equations. In particular, the Adomian decomposition method is proposed for the solution. The behavior of several variables, such as the magnetic and porous matrix, on the flow profile as well as the rate of shear stress, are discussed via graphs and tables. The conformity of the current result with the earlier study shows a road map for further investigation. The major concluding remarks are; the retardation in the velocity distribution is rendered due to an increase in the Casson parameter moreover, the Casson parameter favors in reducing the rate of shear stress coefficient in magnitude.     

Lanthanide doped fluorosilicate glass-ceramics:A review on experimental and theoretical progresses

Significant developments have been made in the past few decades for lanthanide(Ln)ions doped fluorosilicate glass-ceramics(Flusi-GCs).As novel generation of luminescence materials with a wide range of applications,Flusi-GCs as a single host combine the advantages of glass and ceramics/crystals as well as fluorides and silicates.In this review,the chemical design principles and experimental procedures of Flusi-GCs are summarized in detail.Flusi-GCs are categorized as those containing PbxCd_1-xF₂,RF₃(R=Y,La,Gd),MF₂(M=Ca,Sr,Ba),xMF₂-yRF₃(R=Y,La-Lu),mAF-nRF₃(A=Li,Na,K),KTF₃(T=Zn,Mn)and K2 SiF6 nanocrystals(NCs).Theoretical breakthroughs mainly by molecular dynamic(MD)simulation have been recapitulated as efficient routes for composition-design,nano-crystallization-prediction,and performance-optimization of Flusi-GCs containing target fluoride NCs.Essential research progresses pertaining photonic applications have been made in random lasers,communication amplifiers,optical fibers,spectral converters,white light-emitting-diodes(WLEDs),and thermal sensors.In the end,we propose three future research directions for Flusi-GCs.     

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers**

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G’) of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.     

α钛富氧层增厚动力学模型

为了实现在工业化生产中对α钛富氧层厚度预测和控制,通过实验研究α钛富氧层在高温空气环境中的形成及增厚过程,讨论热处理温度和时间的影响作用,建立高温(750~850℃)空气环境下关于温度、时间的富氧层增厚动力学模型。结果表明:当恒温热处理温度为750~850℃时,α钛富氧层厚度x与保温时间t0.5呈正比例关系,且升高热处理温度可显著提高富氧层增厚速度。在此温度范围内,氧原子的扩散激活能约为203473 J/mol,计算曲线与实验数据吻合性较好。结合文献中已有的扩散系数方程和实验测得的富氧层厚度数据,推导得到5个富氧层增厚动力学方程,其中3个方程的计算曲线与实验数据吻合性较好,可为实际生产中预估富氧层厚度提供理论支持。