美国网络空间领域战略思想及发展重点研究

美军将网络空间视为继陆、海、空、天外的第五大作战域,并将其列为国防部11项现代化优先事项之一,在美国等军事大国推动下,网络空间成为国家安全竞争和军事斗争的新疆域.文中对近年美国联邦政府、各部门及各军种发布的网络空间领域主要战略政策、规划计划进行梳理,研究其主要战略思想;分析美军2022财年国防预算、研究经费投向投量及重点项目的 研发情况.形成的研究成果将对我国网络空间安全领域研究提供技术支撑.     

浅议生态环境监测机构的风险控制

现阶段,为了探索创新性的发展途径,生态环境监测机构应始终增强风险控制意识。应加强风险管理,立足于风险控制,以求不断健康发展。     

Evolution and stability of 2-mercaptobenzimidazole inhibitor film upon Al alloy 6061

Journal of Applied Electrochemistry - Organic corrosion inhibitors have become competent alternatives to hazardous chrome conversion coatings due to their rapid adsorption over metal surfaces in...     

Corrosion resistance of Mg(OH)_2/Mg-Al-layered double hydroxide coatings on magnesium alloy AZ31:influence of hydrolysis degree of silane

Mg(OH)_2/Mg-Al-layered double hydroxide(LDH)coatings were modified with methyltrimethoxysilane(MTMS)on magnesium alloys.Effect of hydrolysis degree of silane solution on coating formation was investigated.Chemical compositions and surface morphologies of the coatings were examined using X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and field-emission scanning electronic microscopy(FESEM).Results indicated that the composite coatings consisted of polymethyltrimethoxysilane(PMTMS),LDH and Mg(OH)_2.Electrochemical and hydrogen evolution measurements revealed that the composite coatings possessed good corrosion resistance,especially the ones prepared in a high hydrolysis degree of silane.The optimum corrosion resistance of the composite coating was LDH/PMTMS-3 coating,which had the lowest value of corrosion current density(5.537 × 10~(-9) A·cm~(-2))and a dense surface.Plausible mechanism for coating formation and corrosion process of MTMS-modified Mg(OH)_2/Mg-Al-LDH coatings were discussed.     

Corrosion resistance of nanostructured magnesium hydroxide coating on magnesium alloy AZ31: influence of EDTA

A hexagonal nanosheet Mg(OH)_2 coating was prepared through a one-step hydrothermal method using LiOH solution as mineralizer and then modified by ethylenediaminetetraacetic acid(EDTA) to minimize the rapid corrosion of AZ31 Mg alloy.The performance of the coating was evaluated using electrochemical technique,hydrogen evolution measurements, nanoscratch test,Fourier-transform infrared spectroscopy(FTIR), X-ray diffraction(XRD) patterns and field-emission scanning electron microscopy(FESEM).The results suggested that the corrosion rate of bare AZ31 Mg alloys was significantly reduced by one and two orders of magnitude through the protection from Mg(OH)_2 coating and modification with EDTA(i.e., EDTA-Mg(OH)_2 coating), respectively.FESEM micrographs indicated that the modification in EDTA elicits to the formation of an EDTA-Mg(OH)_2 composite with a thickness as twice as that of as-prepared Mg(OH)_2 coating.Nanoscratch tests revealed strong adhesion between the composite or Mg(OH)_2 coating and the substrate.The study of formation and corrosion mechanisms of the coatings manifested that Mg(OH)_2 was first formed near the intermetallic compound AlMn particles and gradually covered the entire surface, wherein the AlMn particles played an important role in the coating growth process.And it also proved that EDTA accelerated the formation of Mg(OH)_2.     

四川盆地及周缘上奥陶统五峰组岩相特征

上奥陶统五峰组分为页岩段和观音桥段。对比分析四川盆地及周缘五峰组页岩气钻井岩心以及测试数据,根据岩心和全岩矿物组分特征,以硅质矿物(石英)、黏土矿物和碳酸盐矿物为三端元,进行岩相划分。页岩段可识别出4种岩相类型:硅质页岩、含黏土硅质页岩、含灰硅质页岩以及含灰黏土质页岩;观音桥段发育含介壳泥质灰岩。页岩气钻井实测数据表明,页岩段4类页岩岩相品质(有机碳含量、脆性矿物含量以及含气量)差异较大,硅质页岩品质最优,含灰黏土质页岩品质最差。页岩段岩相类型以及观音桥段分布特征受控于沉积环境。川南永川地区等相对浅水的区域页岩厚度较大,但是硅质页岩厚度较小,页岩段整体品质较差,不建议作为水平井靶窗;川南威远地区受古陆和古地形影响,硅质页岩厚度较小,也不建议作为水平井靶窗;川东南焦石坝、武隆、丁山以及南川地区硅质页岩厚度超过4 m,可作为水平井靶窗。     

影响煤层气开发效果的地质因素再认识

地质特征认识对煤层气开发效果起着重要作用。在资源特征相差不大的情况下,发现煤层气相邻井的产量差异仍较大。排除工程因素后,通过选取8类地质参数,细致比对了保德区块低产井与邻井的参数特征,筛查出其关键因素为煤层微幅构造与顶板封盖条件,其中以微幅构造为主。据此,重新认识并划分出区块新的次生褶皱背斜单元、向斜单元和斜坡单元,获得了不同次生褶皱构造单元的开发特征。结果表明,高、低产井分布与次生褶皱背斜、向斜相关性高达92%。其中:高产井主要分布在次生褶皱背斜变化较缓、呈隆起状的“平台”,且煤层顶板以泥岩、碳质泥岩为主,封盖性较好;低产井主要分布在次生褶皱向斜,同一井台各井开发效果差异表现为从向斜条带轴部—向斜条带内—向斜条带外的煤层气井平均单井产量不断增加,到向斜轴部的距离大于向斜曲率半径73.5%的范围为主力产气区,小于向斜曲率半径40.0%范围为产水主力区。这对煤层气新井部署、生产管理、开发调整等,具有一定的指导意义。     

自动电位滴定仪示值误差测量不确定度评定

按照JJG 814-2015规定,自动电位滴定仪需进行电计示值误差和仪器示值误差检定,本文例举对这两项检定结果进行不确定度评定,供相关人员参考。