Preparation of (110)-oriented SrTiO3 film on quartz glass by laser chemical vapor deposition

SrTiO₃ (STO) film was prepared on quartz glass by laser chemical vapor deposition at a deposition temperature (T_dep) ranged from 760 to 1104 K. Effect of the T_dep on the orientation, crystallinity, texture, and microstructure of the STO film was investigated. As the T_dep was increased, the preferred orientation of the STO film tended to be (110)-orientated with corresponding texture coefficient (TC) on the (110) reflection enhanced from 2.3 to 6; meanwhile, the full width at half maximum of the ω-scan on the (110) reflection decreased from 0.85° to 0.59°. The (110)-oriented grains were in wedge shape about 60 × 150 nm in size, which tended to be flat at an elevated T_dep of 1104 K.     

Impact of Co doping on physical,structural, microstructural and magnetic features of MgZn nanoferrites for high frequency applications

Cobalt (Co) doped MgZn spinel nanoferrites with composition Mg_0.5Zn_0.5Co_x Fe_2-xO₄ at x = 0.0, 0.10, 0.20, 0.30, 0.40, 0.50 were prepared using sol-gel auto ignition method. The characterizations techniques such as FESEM, FTIR, XRD and VSM were used to determine the morphology, force constants, phase, structure and magnetic features of the samples. Lattice parameters, FWHM, d-spacing, crystallite size, micro strains and volume were investigated using high score plus software. Materials analysis using diffraction (MAUD) software was also used to study the Rietveld refinement properties of the Co doped MgZn ferrites. Physical properties such as porosity, X-ray and bulk density were also determined. Force constants of their respective absorption bands were calculated from FTIR of the Co doped MgZn nanoferrites. Single phase structure with cubic phase were observed for MgZn and Co doped MgZn at x = 0.0 whereas second phase was observed at higher Co concentrations respectively. FESEM show regular shape of the particles at low Co concentrations whereas agglomerations were observed at higher Co concentrations respectively. The magnetic properties of the Co doped MgZn ferrites were also investigated from VSM study. Magnetic remanence, coercivity, initial permeability, saturation magnetization, Bohr magneton and anisotropy constant were determined from VSM analysis. The coercivity, saturation magnetization, remanence, anisotropy constant and initial permeability were enhanced with the doping of ‘Co’ in MgZn nanoferrites. Response of the Co doped MgZn nanoferrites at high frequency regime was also evaluated. It can be seen that the response from all the Co doped MgZn nanoferrites was 2.84 GHz–5.96 GHz respectively and suggested the use of these nanoferrites for the operation of nanodevices in the X-band high frequency regime.     

2.5 GHz城市环境电磁态势的计算与补偿

复杂城市空间的电磁态势分布可以通过电磁场数值计算的方法进行预测。文章使用矩量法(MOM)结合一致性几何绕射理论(UTD)的方法对2.5 GHz频率下某小区环境中的电磁态势进行了仿真计算以及实际测量。场景中的树木结构在此频率下显示出比较强烈的波动性,对电磁仿真计算结果产生了不可忽略的影响,文中将其对仿真计算结果的影响进行了单独建模仿真,给出其产生影响的经验值,对仿真结果进行修正。修正结果与测量结果对比证明该经验值在该频率下可以有效补偿计算结果的缺失。     

超高层建筑电气设计要点浅析

以北京绿地中心“中国锦”及正大集团总部大厦暨世界华商中心大厦为例,介绍超高层建筑电气系统设计概况,对110 k V变配电站、供配电系统、柴油发电机选择、泛光照明、失电联锁保护方式等作了较为系统的阐述。     

P110钢在含Cl-介质中的冲刷与腐蚀行为研究

采用旋转圆盘装置并辅以电化学工作站测试P110钢在含Cl-溶液中的冲刷腐蚀行为。研究不同流速、不同含砂量对P110钢冲刷腐蚀质量损失速率和腐蚀电化学行为的影响规律,利用扫描电子显微镜(SEM)对冲刷腐蚀后试样表面进行分析表征。结果表明:P110钢在含Cl-溶液中的冲刷腐蚀形貌为典型的颗粒切削痕迹,并伴有少量腐蚀坑,冲刷腐蚀机理为机械和腐蚀相互协同作用;冲刷腐蚀过程存在一临界流速,当流速较低时主要体现为腐蚀作用,当流速超过4 m/s时材料冲刷腐蚀质量损失速率的增加主要来自于机械作用;含砂量对P110钢冲刷腐蚀起着重要影响,随含砂量增大,砂粒的机械冲刷作用增加导致冲刷腐蚀过程加剧,但过多的砂含量会形成"屏蔽作用"降低冲刷腐蚀。     

20万t/a离子膜烧碱整流系统设备的配置

介绍了昊华宇航化工公司20万t/a离子膜烧碱整流系统的配置情况。该系统的投入降低了烧碱装置的能耗,提高了整流供电系统的稳定性。     

Hidden potentialities

The search for “complexity signatures” in natural laws is a main concern for researchers working in many different fields, going from physics to biology. Very simple laws are able to produce unforeseen behaviors, and from their “simplicity” sometimes it is not possible to predict anything about the potential complexities they are able to produce when applied to random initial conditions. Here elementary cellular automata (ECA) are used to illustrate this idea. In fact, using a recently developed approach to establish a correspondence between ECA rules and logical functions that constitute their structure (logical spectra) we analyzed ECA groups represented by automata 120 and 164. The automaton governed by rule 120 generates complex patterns under certain random initial conditions, whereas the one corresponding to rule 164 is known as a simple law when it is evaluated at random initial conditions. However, slight changes in the initial conditions of both ECA produce dramatic “simplicity–complexity transitions”, as it is shown here. These examples show that complexity, even in very simple formal systems, results from a subtle interplay between the structure of the laws and the initial conditions. Moreover, they draw attention to the importance of investigating if analogous comportments hold in large-scale natural phenomena as the yet enigmatic genotype–phenotype mapping.     

Susceptor-assisted fast microwave sintering of TiN reinforced SiAlON composites in a single mode cavity

In the present study, 17 wt % TiN reinforced α-β SiAlON composites were sintered at low temperature by susceptor-assisted microwave heating. The effect of TiN addition on dielectrical properties of starting powders, as well as the influence of sintering temperature on phase evolution, microstructure development and mechanical properties of α/β-SiAlON-TiN composites were investigated. The obtained results showed that TiN addition increased the microwave absorbing properties which is reflected in the peak sintering temperature. Thus, the α:β ratio decreased and mechanical properties were improved, especially the fracture toughness of the composites. Furthermore, an estimate of energy consumption during microwave assisted sintering at the laboratory scale is presented. As a result, the highest values for relative density (97.1%), Vickers hardness (13.35 ± 0.47 GPa), and fracture toughness (7.52 ± 0.54 MPa m^1/2) were obtained by microwave sintering for 30 min at 1300 °C.     

某油井P110油管腐蚀穿孔原因

西部油田某油井油管发生严重腐蚀甚至穿孔。通过宏观形貌和显微组织观察、化学成分分析、硬度测试、拉伸和冲击性能测试、腐蚀产物检测等方法对油管失效原因进行了分析。结果表明:油管在含Cl^-、H2S、CO2酸性环境下发生了均匀腐蚀和局部腐蚀。均匀腐蚀由H2S-CO2-H2O(Cl^-)体系引起的析氢腐蚀所致;而CaCO3沉积造成的微电偶效应以及Fe^2+与地层水中Cl^-的水合作用导致了油管的局部腐蚀穿孔。建议油井管材采用具有一定抗硫性的P110-3Cr钢或耐蚀性能更优的钢,并添加缓蚀阻垢剂进行防护。