“数字信号处理”课程的几何视角

“数字信号处理”的经典课程体系以“系统”为中心，以离散时间傅立叶变换、z变换和离散傅立叶变换为分析工具，以滤波器设计为目的，注重定理和公式推导及其性质分析，很难让学生建立一个形象的、完整统一的知识体系框架。本文从几何视角将 “系统”化和“代数”化的经典课程体系重构为面向“信号”的“几何”知识体系，从而提升学生对本质问题的“洞察力”，帮助学生建立系统的知识体系。     

“数字电子技术”课程思政教学改革研究

落实立德树人,实现三全育人,将思政融入到《数字电子技术》这门专业课程中,培养学生专业知识的同时,引导学生树立良好的人生观和价值观。通过重构本校的数字电子技术课程内容,挖掘思政元素,并润物细无声般融入到数字电子技术的教学改革中,并通过实际的案例讲解具体融入过程。     

传统企业数字化转型能力体系构建研究

企业试图完成数字化转型,这是在竞争中谋求发展的必经之路。文章率先进行数字化转型特征、策略的概念分析,而后总结以此为背景的能力模型、企业管理能力与技术能力,最终以某公司案例完成体系构建与应用的阐述。     

IRS辅助的SWIPT系统中基于能效优先的波束成形设计与优化

以智能反射面(intelligent reflecting surface,IRS)辅助的无线携能通信(simultaneous wireless information and power transfer,SWIPT)系统为背景,研究了该系统中基于能效优先的多天线发送端有源波束成形与IRS无源波束成形联合设计与优化方法。以最大化接收端的最小能效为优化目标,构造在发送端功率、接收端能量阈值、IRS相移等多约束下的非线性优化问题,用交替方向乘子法(alternating direction method of multipliers,ADMM)求解。采用Dinkelbach算法转化目标函数,通过奇异值分解(singular value decomposition,SVD)和半定松弛(semi-definite relaxation,SDR)得到发送端有源波束成形向量。采用SDR得到IRS相移矩阵与反射波束成形向量。结果表明,该系统显著降低了系统能量收集(energy harvesting,EH)接收端的能量阈值。当系统总电路功耗为?15 dBm时,所提方案的用户能效为300 KB/J。当IRS反射阵源数与发送天线数均为最大值时,系统可达最大能效。     

用于电弧检测的电力专用SoC设计

针对传统的电弧电路故障检测结果不准确的问题,设计用于电弧检测的SoC系统,并且在55nm工艺下进行流片验证。采用包含两种结构的模数转换器的片上电压源,设计了锁相环以及复位电路,精度最高可达8.67 bit。验证结果表明,本设计可提高电弧检测的准确性。     

数字签名技术在医院电子病历中的设计与应用

为推进病历数字化发展,并确保其信息的安全性,将以HIS电子病历系统为基础,采用安信数字签名技术和PKI或PMI系统搭建相信并加以任用的授权服务,经过针对实际的PKC和CA的确认、委托与管控构建整体的数字签名平台,完成电子病历数字签名功能设计,以加强电子文件的完整性、真实性和不可抵赖性。最后以某医院的XML结构化的电子病历系统为基础进行项目实施,完成了医护人员通过HIS的快速身份认证,和准确地数字签名。     

Determinants of the intention to use non-medical insertable digital devices: The case of Chile and Colombia

In the past, thinking of carrying electronic devices inside our bodies was only posed by non-real scenarios. The emergence of insertable devices has changed this. Since this technology is still in its initial development stages, few studies have investigated factors that influence its acceptance. This paper analyzes the predictors of the intention to use non-medical insertable devices in two Latin American contexts. We used partial least squares structural equation modeling to examine whether six constructs predicted intention to use insertable devices. A questionnaire was administered to undergraduate students located in Colombia and Chile (n = 672). We also examined whether these predictors influenced intention differently for both of them. Four common constructs significantly and positively influenced both Chilean and Colombian respondents to use insertable devices (hedonic motivation, habit, performance expectancy, and social influence). Also, the habit has a complementary mediating effect on the relationship between social influence and behavioral intention. By contrast, effort expectations were a positive and significant predictor, but only among Chilean respondents. Findings suggest that when technologies are emerging, well-known predictors of intention (e.g., performance and effort expectations) are less influential than predictors related to self-efficacy (e.g., habit and hedonic motivation). The use of insertable devices has a significant impact on society. Thus, a better understanding of what motivates their use has implications for both academia and industry.     

Extrinsic parameter's adjustment and potential implications in Plasmodium falciparum malaria diagnosis

Malaria is a major public health concern, affecting over 3.2 billion people in 91 countries. The advent of digital microscopy and Machine learning with the aim of automating Plasmodium falciparum diagnosis extensively depends on the extracted image features. The color of the cells, plasma, and stained artifacts influence the topological, geometrical, and statistical parameters being used to extract image features. During microscopic image acquisition, custom adjustments to the condenser and color temperature controls often have an influence on the extracted statistical features. But, our human visual system sub-consciously adjusts the color and retains the originality in a different lighting environment. Despite the use of appropriate image preprocessing, findings from the literature indicate that statistical feature variations exist, allowing the risk of P. falciparum misinterpretation. In order to eliminate this pervasive variation, the current work focuses on preprocessing the extracted statistical features rather than the prepossessing of the source image. It begins with the augmentation of series images for a microscopic field by inducing illumination variations during the microscopic image acquisition stage. A set of such image series is analyzed using a Nonlinear Regression Model to generalize the relationship between microscopic images acquired with variable ambient brightness and a specific feature. The projection point of the centroid feature onto the brightness parameter is identified in the model and it is denoted as the optimum brightness factor (OBF). Using the model, the feature correction factor (CF) is calculated from the rate of change of feature values over the interval OBF, and the brightness of the test image is processed. The present work has investigated OBF for selected image textural features, namely Contrast, Homogeneity, Entropy, Energy, and Correlation individually from its co-occurrence matrices. For performance analysis, the best state-of-the-art method uses selected texture as a subset feature to evaluate the effectiveness of P. falciparum malaria classification. Then, the impact of proposed feature processing is evaluated on 274 blood smear images with and without Feature Correction (FC). As a result, the “p” value is less than .05, which leads to the result that it is highly significant and the classification accuracy and F-score of P. falciparum malaria are increased.     

一种新的应用于5G中的自适应波束赋形优化算法

5G standard uses millimeter wave band to realize communication. In order to cover more reasonable in 5G communication system, beamforming technology must be adopted. To speed up the convergence, a novel algorithm based on the SWO criterion is proposed which can be applied in millimeter wave communication. The simulation results show that compared with other beamform- ing algorithms, the proposed algorithm can achieve higher convergence speed and is more realizable.     

A broadband filter with two transmission zeros adopting a new design method

A new design method was proposed in this article to insert transmission zeros in the broadband filters. In this method, the coupling line was connected to a certain position on the resonator. And then the coupling strength was adjusted by the connecting position. The open end of the resonator was hung and then the cross‐coupling was introduced to realize transmission zeros. This coupling method could add an adjustable parameter to improve the freedom of design and convenient to insert the transmission zeros. To verify this method, a highly selective coupled‐line microstrip filter with two transmission zeros was designed, fabricated, and measured. The measured results were in good agreement with the simulated ones. The return and insertion losses of the broadband filter were better than 18 and 2 dB, respectively. The relative bandwidth of the filter (FBW) was more than 68%. The rectangular coefficient (30 dB:1 dB) was less than 1.21.